|
Transom Trim Control Push Button Trim Switch
Transom Trim Control Switch/Hydraulic Jack Plate Switch
Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.
Features:
Trim switch for outboards or stern drives
Hydraulic jack plate switch
Puts Tilt & Trim Control Anywhere
Weatherproof Control Switches
UV stable molded housing
Can Also Operate Power Jack Plates
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.16 |
|
|
RJ45-M Ethernet Adapter Cable
RJ45-Yellow Round Ethernet adapter cable for Simrad NSO evo2 and Zeus2 displays.
|
22.98 |
|
|
MPPT Charge Controller Remote Panel with 25' Cable PPT Remote Display
Provides real-time data about your solar system. Designed for quick and easy installation. Includes 25' cable.
|
68.48 |
|
|
EnviroComfort ECD6KZ-HV AC Retrofit Kit - 6,000 BTU - 230V
The Dometic Marine Air 6,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 6,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 5,000 to 7,000 BTU range.
All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity.
Legacy Part Number - 207500307
Features:
High-velocity, rotatable blower for horizontal or vertical installation
Environmentally friendly R-410A refrigerant
Easy to use Dometic Passport I/O digital control and display (P/N 9600005997)
Plastic remote electrical box for convenience in mounting
Stainless-steel drain pan
Pre-installed return-air filter, easily removable and cleanable
Small, compact, space-saving design
Specifications:
Input voltage - 230 V
Starting amps - 34 A
Fuse Max. / Min. - 20 A/12 A
Input frequency 50/60 Hz
Refrigerant type - R410A
Colling capacity - 6,000 BTU
Min. supply duct size - 4"
Seawater inlet connection - .625"
Dimensions - Height 11.25" x Width 16" x Depth 9"
In the Box:
Self-contained AC unit
Digital control w/bezel and 15' cable
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2152.94 |
|
|
EnviroComfort ECD10KZ-HV AC Retrofit Kit - 10,000 BTU - 230V
The Dometic Marine Air 10,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 10,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 8,000 to 11,000 BTU range.
All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity.
Legacy Part Number - 207500010
Features:
High-velocity, rotatable blower for horizontal or vertical installation
Environmentally friendly R-410A refrigerant
Easy to use Dometic Passport I/O digital control and display (P/N 9600005997)
Plastic remote electrical box for convenience in mounting
Stainless-steel drain pan
Pre-installed return-air filter, easily removable and cleanable
Small, compact, space-saving design
Specifications:
Input voltage - 230 V
Starting amps - 34 A
Fuse Max. / Min. - 20 A/12 A
Input frequency 50/60 Hz
Refrigerant type - R410A
Colling capacity - 10,000 BTU
Min. supply duct size - 6"
Seawater inlet connection - .625"
Dimensions - Height 13.25" x Width 20" x Depth 9.63"
In the Box:
Self-contained AC unit
Digital control w/bezel and 15' cable
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2308.24 |
|
|
EnviroComfort ECD16KZ-HV AC Retrofit Kit - 230 V - 16,000 BTU
The Dometic Marine Air 16,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 16,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 12,000 to 16,000 BTU range.
All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity.
Legacy Part Number - 207500017
Features:
High-velocity, rotatable blower for horizontal or vertical installation
Environmentally friendly R-410A refrigerant
Easy to use Dometic Passport I/O digital control and display (P/N 9600005997)
Plastic remote electrical box for convenience in mounting
Stainless-steel drain pan
Pre-installed return-air filter, easily removable and cleanable
Small, compact, space-saving design
Specifications:
Input voltage - 230 V
Starting amps - 34 A
Fuse Max./Min. - 20 A/12 A
Input frequency 50/60 Hz
Refrigerant type - R410A
Colling capacity - 16,000 BTU
Min. supply duct size - 6"
Seawater inlet connection - .625"
Dimensions - Height 13.5" x Width 20" x Depth 11.25"
In the Box:
Self-contained AC unit
Digital control with bezel and 15' cable
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2313.52 |
|
|
EnviroComfort ECD6K-HV AC Retrofit Kit - 115V - 6,000 BTU
The Dometic Marine Air 6,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 6,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 5,000 to 7,000 BTU range.
All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity.
Legacy Part Number - 207500306
Features:
High-velocity, rotatable blower for horizontal or vertical installation
Environmentally friendly R-410A refrigerant
Easy to use Dometic Passport I/O digital control and display (P/N 9600005997)
Plastic remote electrical box for convenience in mounting
Stainless-steel drain pan
Pre-installed return-air filter, easily removable and cleanable
Small, compact, space-saving design
Specifications:
Input voltage - 115 V
Starting amps - 36 A
Fuse Max. / Min. - 20 A/12 A
Input frequency 50/60 Hz
Refrigerant type - R410A
Colling capacity - 6,000 BTU
Min. supply duct size - 4"
Seawater inlet connection - .625"
Dimensions - Height 11.25" x Width 16" x Depth 9"
In the Box:
Self-contained AC unit
Digital control w/bezel and 15' cable
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2082.35 |
|
|
EnviroComfort ECD10K-HV AC Retrofit Kit - 10,000 BTU - 115V
The Dometic Marine Air 10,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 10,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 8,000 to 11,000 BTU range.
All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity.
Legacy Part Number - 207500310
Features:
High-velocity, rotatable blower for horizontal or vertical installation
Environmentally friendly R-410A refrigerant
Easy to use Dometic Passport I/O digital control and display (P/N 9600005997)
Plastic remote electrical box for convenience in mounting
Stainless-steel drain pan
Pre-installed return-air filter, easily removable and cleanable
Small, compact, space-saving design
Specifications:
Input voltage - 115 V
Starting amps - 42 A
Fuse Max. / Min. - 25 A/12 A
Input frequency 50/60 Hz
Refrigerant type - R410A
Colling capacity - 10,000 BTU
Min. supply duct size - 6"
Seawater inlet connection - .625"
Dimensions - Height 13.25" x Width 20" x Depth 9.63"
In the Box:
Self-contained AC unit
Digital control w/bezel and 15' cable
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2241.18 |
|
|
EnviroComfort ECD16K-HV AC Retrofit Kit - 115V - 16,000 BTU
The Dometic Marine Air 16,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 16,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 12,000 to 16,000 BTU range.
All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity.
Legacy Part Number - 207500316
Features:
High-velocity, rotatable blower for horizontal or vertical installation
Environmentally friendly R-410A refrigerant
Easy to use Dometic Passport I/O digital control and display (P/N 9600005997)
Plastic remote electrical box for convenience in mounting
Stainless-steel drain pan
Pre-installed return-air filter, easily removable and cleanable
Small, compact, space-saving design
Specifications:
Input voltage - 115 V
Starting amps - 62 A
Fuse Max. / Min. - 40 A/25 A
Input frequency 50/60 Hz
Refrigerant type - R410A
Colling capacity - 16,000 BTU
Min. supply duct size - 6"
Seawater inlet connection - .625"
Dimensions - Height 13.5" x Width 20" x Depth 11.25"
In the Box:
Self-contained AC unit
Digital control w/bezel and 15' cable
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2378.82 |
|
|
Max Control Holding Tank Deodorant - 1-Gallon
Max Control Advanced formaldehyde-free formula. Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.
Features:
4 ounces treats a 40 gallon holding tank
Formaldehyde-Free Formula
Easy to use. See-through window stripe and 8-oz. increment marks make measuring easy
One (1) Gallon container
New Item # 9108557756
*Sold by the Gallon
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
34.01 |
|
|
Max Control Holding Tank Deodorant - 12 Pack of 1.5oz Pods
Max Control Advanced formaldehyde-free formula. Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.
Features:
1 Ounce per 10 Gallons of Holding Tank Capacity
Formaldehyde-Free Formula
100% biodegradable
12 Pack of 1.5oz. pods
New Item # 9108844944
*Sold by the 12 Pack
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
15.96 |
|
|
Max Control Holding Tank Deodorant - 32oz Bottle
Max Control Advanced formaldehyde-free formula. Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.
Features:
4 ounces treats a 40 gallon holding tank
Formaldehyde-Free Formula
Easy to use. See-through window stripe and 8-oz. increment marks make measuring easy
32 oz. Container
New Item # 9108557757
*Sold by the 32 oz. Container
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
15.96 |
|
|
Max Control Holding Tank Deodorant - Four (4) Pack of 8oz Bottles
Max Control Advanced formaldehyde-free formula. Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.
Features:
4 ounces treats a 40 gallon holding tank
Formaldehyde-Free Formula
Easy to use. See-through window stripe for measuring ease
Eight (8) oz. Container
New Item # 9108557759
*Sold by the four (4) Pack
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
33.32 |
|
|
Features standard neutral safety switch, neutral lock out, neutral warm up and safety stop switch with lanyard along with start-in-gear protection. Ergonomically balanced handle design for smooth, positive feel. "Easy-On" cable design accepts virtually every type of OEM and 3300/33C type cable. Can also use Mercury® style cables from 1965 to date, including Gen II, OMC/Johnson/Evinrude/BRP® control cables from 1979 to date. Easily adapted to push or pull cable actuation mode. For best performance use Xtreme Control Cables. Dual action lever (throttle and shift control on one handle). Drag adjustment on all controls. Neutral "warm up" button for throttle-only operation.
|
479.99 |
|
|
Features standard neutral safety switch, neutral lock out, neutral warm up and safety stop switch with lanyard along with start-in-gear protection. Ergonomically balanced handle design for smooth, positive feel. "Easy-On" cable design accepts virtually every type of OEM and 3300/33C type cable. Can also use Mercury® style cables from 1965 to date, including Gen II, OMC/Johnson/Evinrude/BRP® control cables from 1979 to date. Easily adapted to push or pull cable actuation mode. For best performance use Xtreme Control Cables. Dual action lever (throttle and shift control on one handle). Drag adjustment on all controls. Neutral "warm up" button for throttle-only operation.
|
628.99 |
|