Locking Collar Pole Light Mounting Base - 2-Pin - Stainless Steel Features: 2-Pin Plug-In Type Base 5° Rake Construction: Stainless Steel Black Plastic Water Resistant Slide Cover Pigtail Leads Fits: Figs. 1343, 1348, 1400, 1445, 1451, 1455, 1456, 1465 and 1470 Series and All-Round Pole Lights

Locking Collar Pole Light Mounting Base - 2-Pin - Stainless Steel Features: 2-Pin Plug-In Type Base 0° Rake Construction: Stainless Steel Black Plastic Water Resistant Slide Cover Pigtail Leads Fits: Figs. 1343, 1348, 1400, 1440, 1450, 1451, 1452, 1460 and 1470 Series

1" Slanted Chrome Plated Flag Pole Socket Triple chrome plated with 3/4" and 1" inside diameter.

17" Rail Mount Flag Pole - 1/2" Diameter, Stainless Steel Staff Nylon Mount Features: Rail Mount Flagstaff 304 S.S. staff and Black Nylon Bracket Diameter - 1/2" Length - 17" Bracket - 7/8" and 1" tube

Smart Cleat 6" Deck Mount Investment Cast 316 Stainless Steel The Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. Constructed of corrosion resistant investment cast 316 stainless steel. Open base mount cleats install with four 1/4" FH fasteners (not included).

Rail Base Fitting Rectangular Base 90° - 316 Stainless Steel - 1-11/16" x 3" - 7/8" O.D. Replacement rail base fitting.   Features: Constructed of corrosion resistant investment cast 316 stainless steel.  Stainless tubing with a wall thickness of 0.049” Installs with four FH fasteners (not included).  ∗Sold as an individual 

Red/Green Horizontal Mount Side Light - Pair - Stainless Steel This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Polished stainless steel top with black polymer base High-tech, self-contained LED modules A new stylish, low-profile design Same footprint as the 0615/0616 LED lights (wiring hole and mounting screw locations may vary) Sold in pairs 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 2-1/2 in. x 2-3/4 in. x 1 in. Screw Size: #6 Finish: Stainless Steel Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619658 *Sold as a pair 

Butt Hinge 90° Offset Length:1-3/8" Width:1-1/2" Fastener:#8 FH Material: 304 Stainless Steel Offset: 3/8"

30° Flush Mount Rod Holder - 304 Stainless Steel - 9-1/4" Features: Length: 9-1/4" Flange: 3-3/8" x 4-1/4" Tube Inner Diameter: 1-5/8" Fastener: 5/16"(3) Material: 304 Stainless Steel

Faux Center Nut - Stainless Steel - 1/2" & 5/8" M12 Base Included for Cast Steering Wheels Features: A lighter-weight nut with the same durability as our standard stainless steel center nuts Unique design allows for Universal fit

Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Base Starlink quick-release top plate for Seaview "M1" and "M2" style mounts. Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4” tall The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar

Smart Cleat 6" Stud Mount Investment Cast 316 Stainless Steel The Stud Mount Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. The stud mounted fasteners are hidden, leaving no exposed fasteners to collect water or debris. Studs are 1/4"-20 x 1-1/2". Installation is easy with two standard bit size holes drilled for the studs (no cutouts or hole saws required). Includes stainless steel washers and nuts. Constructed of corrosion resistant investment cast 316 stainless steel.

Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed Base Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base The bottom of the adapter has 1”-14 threads with sets crew to lock in place The top of the adapter is machined to fit the Starlink antenna post The overall height is 4” (adapter with the 3” diameter fixed base)

1-Mile Deck Mount, Green Sidelight - 12V - Stainless Steel Housing Part #: 66319G7 Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility. Features: 7" Wire Lead 12V Stainless Steel Housing Green WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 7-1/2" (190 mm) ID 1-3/4" (45 mm) Line Size 5/8" (16 mm) Track 1-1/4" x 3/16" (31 mm x 4.6 mm) Pin. Size .355 SWL 4500 lbs. (2045 kg) Weight 1.5 lbs. (.68 kg)