Professional Red 2" Trim Gauge The Faria Beede Professional Red features perimeter-lighted Black dial with stylish Red and White graphics, Black aluminum bezel, tear- drop White pointer and flat glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types: (Mercury/Mariner/Mercruiser/Volvo DP/Yamaha-2001 and newer) Specifications: Flat Glass Anti-fog, Scratch Resistant Lens Black Aluminum Bezel LED Illuminating around the Perimeter of the Dial White Tear Drop Pointer Factory P/N GP7422 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

OEM gauges for outboards, stern drives and gas powered inboards. Light gray dials with clean black numerals, and black pointer hub with white staff. Scratch resistant domed glass lens with black bezel. Combined blue through-dial with white perimeter lighting provides a unique look and high visibility.

Original Equipment Quality Replacement Tilt Trim Motor for Mercury/Mariner Outboards with Design II 3 RAM Replacement outboard tilt trim motor that will fit Mercury/Mariner outboards w/Design II 3 ram, three-wire trim units, Hollow-hex shaft W/AFT FILL RESERVOIR, 3-wire connection, 2-bolt mount, Shaft adaptor, and O-ring included, Ring Terminal Ends.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 811628 MERCURY Tilt Trim Motor 828708A1 MERCURY Tilt Trim Motor 878265A6 SIERRA Tilt Trim Motor 18-6774 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Spun Silver 2" Voltmeter (10-16 VDC) Perimeter-lighted Silver dial with bold Black graphics, polished stainless steel bezel, contoured Black pointer, and domed glass lens.  A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2"- Hole Size: 2.0625" (53mm)  Specifications: Domed, Scratch Resistant Lens Stainless Steel Bezel LED Illuminating around the Perimeter of the Dial Factory P/N VP92223 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Spun Silver 2" Water Temp Gauge (100 - 250° F)  Perimeter-lighted Silver dial with bold Black graphics, polished stainless steel bezel, contoured Black pointer, and domed glass lens. A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature. 2"- Hole Size: 2.0625" (53mm)  Specifications: Domed, Scratch Resistant Lens Stainless Steel Bezel LED Illuminating around the Perimeter of the Dial Dual Scale - Imperial and Metric Factory P/N GP9428 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Spun Silver 2" Oil Pressure Gauge (80 PSI)  Perimeter-lighted Silver dial with bold Black graphics, polished stainless steel bezel, contoured Black pointer, and domed glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2"- Hole Size: 2.0625" (53mm)  Specifications: Domed, Scratch Resistant Lens Stainless Steel Bezel LED Illuminating around the Perimeter of the Dial Dual Scale - Imperial and Metric Factory P/N GP9623 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

2" Trim Gauge f/Johnson, Evinrude & Suzuki Outboards Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.   2"- Hole Size: 2.0625" (53mm) For Engine Types: Johnson, Evinrude & Suzuki Outboards Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5087 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Spun Silver 2" Fuel Level Gauge (E-1/2-F)  Perimeter-lighted Silver dial with bold Black graphics, polished stainless steel bezel, contoured Black pointer, and domed glass lens. Fuel Level gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel. 2"- Hole Size: 2.0625" (53mm)  Specifications: Domed, Scratch Resistant Lens Stainless Steel Bezel LED Illuminating around the Perimeter of the Dial Factory P/N GP9932 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Platinum 2" Trim Gauge for Honda Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.   2"- Hole Size: 2.0625" (53mm) For Engine Types: Honda Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5085 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake White SS 2" Trim Gauge (OMC Cobra ('93 - '94) & Volvo SX - MD Models) Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types: (OMC Cobra ('93 - '94) & Volvo SX - MD Models) Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9734 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake Black 2" Trim Gauge (Johnson/Envirude/Suzuki Outboard) Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types: Johnson/Envirude/Suzuki Outboards Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9414 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dress White 2" Trim Gauge (Johnson/Evinrude/Suzuki Outboard) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types: Johnson/Envirude/Suzuki Outboards Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9711 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake White SS 2" Trim Gauge f/Honda Engines Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. 2"- Hole Size: 2.0625" (53mm) For Engine Types: Honda Engines Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP7440 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coral 2" Trim Gauge for Suzuki, Johnson & Evinrude Outboard Perimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens. 2" - Hole Size: 2.0625" (53mm) For Engine Types: Johnson/Evinrude/Suzuki Outboards Specifications: Scratch Resistant Lens Black Aluminum Bezel Contoured White Pointer Factory P/N GP9273 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Lenco Automatic Trim Tab Control System   A real automatic boat control/trim tab control system that actually works - completely and automatically!  The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again.  The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set-up process after the installation of your Auto Glide system.              Closeouts     Rebates    Remanufactured    Specials