|
Riptide PowerDrive™ 70 Trolling Motor with Micro Remote - 24V - 70LB - 54"
Riptide PowerDrive has been counted on for years by saltwater anglers who want reliable performance with smart boat control features. With a tough, sleek mount and an arsenal of reliable innovations, it's not tough to see why. Nobody outworks a Riptide.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor, and when it's time to move, it stows easily and securely.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from Powerdrive's simple and straightforward micro remote.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Advanced Corrosion Protection
Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
One-Boat Network Enabled Riptide PowerDrive 70 lb. 54" Motor, Micro Remote, Lanyard, MKP-37 Prop, and Mounting Hardware
Specifications:
For Use In: Saltwater
Shaft Length: 54"
Voltage: 24
One-Boat Network Compatible: Yes
QUEST Series: No
Spot-Lock: Yes
Built-In Sonar: None
Foot Pedal Style: Not included
Control: Micro Remote
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: Yes
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 42
Mount Style: Bolt-On
Mounting Location: Bow-Mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1898.78 |
|
|
SP-120 System with Rudder Feedback & Type "S" Mechanical Dash Drive
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2816.70 |
|
|
SP-120 System with Rudder Feedback & Type "T" Mechanical Dash Drive
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2897.20 |
|
|
SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1994 + Mercury IO/Volvo Gas
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
3219.20 |
|
|
SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1983-93 Mercury IO/Volvo Diesel
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
3310.23 |
|
|
XPS Pontoon Power Steering Unit
Don’t get left behind…take advantage of the ease, control, and power of GEN 2, the most advanced XPS Power Steering yet!
The Panther XPS G2 Power Steering System is a hybrid system that combines the durability and dependability of cable steering with the ease of automobile-like power steering. The Panther XPS G2 gradually reverts to cable steering in case of hose failure, steering fluid leak, or power loss to the pump, so you’re NEVER without steering. Engineered to make steering your boat as effortless as the vehicle you drive. No matter the vessel you operate, XPS offers affordability, confidence, fitness, and all-around ease of operation.
Safe:
Existing Cable steering acts as a safety backup in case of system failure
Exceeds ABYC mechanical and hydraulic steering standards
Effortless:
Automobile like effort
Eliminates prop torque
Easy to maneuver in tight quarters, especially around docks and landings
Broad Fit Range:
Designed to fit any boat or pontoon that can use cable steering
The cylinder can be fully extended without interference
Outboard engines 90-250Hp
Save Time & Money:
Self-bleeding hoses
Utilize existing mechanical steering
Save Power:
Stored energy allows for short pump run-times
Less power draw substantially reduces the risk of dead batteries
|
1138.33 |
|
|
SD10 Mechanical Drive Unit
The SD10 is a mechanical drive unit featuring built-in rudder feedback for sailboats between 25ft and 37ft. The SD10 partners with Simrad autopilot computer as part of an autopilot system. (Access to a quadrant or tiller is required).
Features:
Highly Accurate - Minor incremental adjustments provide a smooth auto-steering experience
Powerful - 180kg of cable thrust ensures the rudder moves, even under heavy loads
Easy & Economical - Reduce the price of your installation with this cost effective package
12V DC Power Supply
Integrated Rudder Feedback - The built-in rudder feedback unit ensures gentle and accurate steering
Simrad Yachting Construction - Brutally strong and built to withstand the environment
|
1978.80 |
|
|
Dramatically reduces wheel torque which reduces steering effort. Reverts to manual mode in the case of power loss. Suitable for use with autopilots. Wall or floor mount. May be used with O/B, I/O, I/B powered boats equipped with standard hydraulic steering. Supplied with 15' wire harness. Both 12V and 24V systems are automatically recognized by the unit. Requires HA1206 fuse kit (sold separately) for ABYC compliance when connecting the PA1200-2 directly to the battery.
|
2694.99 |
|
|
Capstans
Why Capstans?
Rather than using the hand-over-hand method of retrieving lines, the capstan offers a mechanical advantage that is both faster and safer. The capstan does the heavy lifting with only a small amount of effort. The maximum speed of the line retrieval depends on the rotational speed of the drum. The benefit is that the retrieval speed can be adjusted by decreasing the tension on the retrieved line, maintaining control over a very heavy load with little effort.
This useful device, which has been around since the early days of sailing, is still used today. Recreational fishermen, like commercial fishermen, use these for hauling crab and lobster pots and there are many other uses aboard boats. The few mechanical parts and ease of use have made this a favorite of fisherman worldwide. While chains should NEVER be wrapped around a drum, the majority of lines can be handled on a capstan.
A capstan, typically operated by an easy to use footswitch (R001459), allows the boater to control lines with ease without having additional crew members. Powerwinch has a model to fit your needs. All Powerwinch capstans come with a foot control switch that allows for hands-free operation.
Capstan 1000
Multi-purpose rope winch for anchoring, sailing & Fishing
1000 pounds of pulling power!
Our largest capstan, the Capstan 1000, is a power assisted rope capstan for larger applications with 1000 pound pull power and 40 ft/minute retrieval speed. A great tool for quick retrieval lobster, prawn and crab pots. The Capstan 100 also provides power assist for limited crew sailboats and power assisted anchor retrieval. Uses up to 3/4" diameter rope.
Fast 40'/min retrieval speed
1000 lb max pulling power
Handles unlimited rope lengths
Easy to operate footswitch (included)
All aluminum housing with a durable polyester finish
Thermal automatic resetting circuit breaker
One piece, heat-treated and oil-impregnated gears
Stainless steel internal shafts, fasteners, and hardware
Two year limited warranty
|
912.94 |
|
|
Power A EM11 - Electronic Control Package
Single Engine/Single Station - Electronic Throttle/MechanicalShift
Power A Mark II™ Electronics Control Systems
Private Protocol can bus for data transmission
Connection of multiple stations up to 4 controls
Modular System
Direct communication w/electronic engines (SAE J 1939 or NMEA 2000)
Plug'N Play connectivity
Automatic engines synchronization
Dock Assist
Fully programmable shift delays
EM11 Package Includes:
42009G - (1) PA2-B1 - Single Lever Control w/o Trim
42017F - (1) PA2-CU - Control Unit w/LED Diagnostic & Programming Screen
42018H - (1) PA2-VT - V-Throttle f/0-5V Interface
42027J - (1) PA2-MA - Electro-Mechanical Actuator f/Shift and/or Throttle
42028L - (1) PA2-NT - Network Terminator
42029N - (1) T-VT2 - Universal V-Throttle Cable 6.5'
42053K - (1) M-P3 - Main Power Supply Cable, 9.8'
71021K - (1) CAN-10 - Network Connection Cable 33'
73639T - (2) CAN-1 - Network Connection Cable 3'
|
3299.64 |
|
|
Capstans
Why Capstans?
Rather than using the hand-over-hand method of retrieving lines, the capstan offers a mechanical advantage that is both faster and safer. The capstan does the heavy lifting with only a small amount of effort. The maximum speed of the line retrieval depends on the rotational speed of the drum. The benefit is that the retrieval speed can be adjusted by decreasing the tension on the retrieved line, maintaining control over a very heavy load with little effort.
This useful device, which has been around since the early days of sailing, is still used today. Recreational fishermen, like commercial fishermen, use these for hauling crab and lobster pots and there are many other uses aboard boats. The few mechanical parts and ease of use have made this a favorite of fisherman worldwide. While chains should NEVER be wrapped around a drum, the majority of lines can be handled on a capstan.
A capstan, typically operated by an easy to use footswitch (P7817600AJ), allows the boater to control lines with ease without having additional crew members. Powerwinch has a model to fit your needs. All Powerwinch capstans come with a foot control switch that allows for hands-free operation.
Quick Catch Pot Puller
Spend more time fishing, less time pulling pots
Up to 200 pounds of pulling power!
Our Quick Catch Pot Puller is perfect for fast, safe and easy retrieval of lobster or crab pots with a fast retrieval speed of 150' ft/minute. Electrical power assist retrieves pots in less than two minutes!
Fast 150'/min retrieval with 100 lb load
200 lb max pull rating
Twice as fast as the 300
Low current motor draw
Easy to operate foot control
Handles unlimited rope lengths
Stainless steel internal shafts, fasteners and hardware
All aluminum housing, e-coat primer with a powder topcoat
Two year limited bow to stern warranty
Ratings
175 (ft/min) @ 50lbs
150 (ft/min) @ 100lbs
120 (ft/min) @ 150lbs
Average 12v current draw @ 100 lbs = 43 amps
|
737.35 |
|
|
D-Series PRO - Flush Mount - Diffused - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Optics: Hybrid - Diffused
LED Color: White
Finish Color: Black
Mount Type: Flush
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.46lb
Sold As: Pair
Hybrid Optics
60° Diffused Pattern
50,000+ Hr LED Lifespan
Instant On / Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Cast Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE® Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
Sealed Deutsch Connector
Specifications:
Watts: 30
Amp Draw: 2.14
LED's: 4
Raw Lumens: 3168
Lux @ 10m: 20.6
Beam Distance: 45.4 m
Peak Beam Intensity: 2060 cd
|
200.84 |
|
|
D-Series PRO - Flood LED - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Optics: Hybrid - Flood
LED Color: White
Finish Color: Black / Black
Mount Type: Surface
Shipping Dimensions: 6 × 8 × 6 in
Product Weight: 2.12 lb
Sold As: Pair
Hybrid Optics
20° Flood Pattern
50,000+ Hr LED Lifespan
Instant On / Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Cast Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE® Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
Sealed Deutsch Connector
Specifications:
Watts: 30
Amp Draw: 2.14
LED's: 4
Raw Lumens: 3168
Lux @ 10m: 58.19
Beam Distance: 76.3 m
Peak Beam Intensity: 5819 cd
|
216.29 |
|
|
D-SS Series PRO Flood LED Surface Mount - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Flood
LED Color: White
Finish Color: Black
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.36
LED's: 7
Raw Lumens: 5544
Lux @ 10m: 71.29
Beam Distance: 84.4 m
Peak Beam Intensity: 7,129 cd
|
292.50 |
|
|
D-SS PRO Flood LED Surface Mount - Pair - White
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Flood
LED Color: White
Finish Color: White
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.36
LED's: 7
Raw Lumens: 5544
Lux @ 10m: 71.29
Beam Distance: 84.4 m
Peak Beam Intensity: 7,129 cd
|
292.50 |
|