|
White snap on cover for MFD8 Units
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.72 |
|
|
19 Gallon (72L) Waste Water Tank CPL Macerator - 12V
Complete waste water tank kit with pump ready to install.
Including a 72L (19 G) rectangular tank in reinforced polyethylene, waste water macerator pump 12V, gas vent, active carbon filter, control panel and probe for level control.
Linear low density polyethylene is the best suited material for holding tanks because of resistance to corrosion and odor permeation.
Specifications:
Weight: 25 kg/55 Lb
Dimensions: 700/27.5L x 300/11.8H x 400/15.75W mm/in
Type: Black water
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
559.96 |
|
|
Contour Series Drop-In Navigation Light - Starboard Green
Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.
Features:
Output: Starboard Green
Visibility: USCG2NM
Voltage: 10-30V DC
12vDC Amps: 18-26mA
24vDC Amps: 12-15mA
Conforms to: ABYC A16
|
58.49 |
|
|
Contour Series Drop-In Navigation Light - Stern White
Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.
Features:
Output: Stern White
Visibility: USCG2NM
Voltage: 10-30V DC
12vDC Amps: 18-26mA
24vDC Amps: 12-15mA
Conforms to: ABYC A16
|
58.49 |
|
|
Contour Series Inset Navigation Light - Port Red
Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.
Features:
Output: Port Red
Visibility: USCG2NM
Voltage: 10-30V DC
12vDC Amps: 18-26mA
24vDC Amps: 12-15mA
Conforms to: ABYC A16
|
58.49 |
|
|
Contour Series Inset Navigation Light - Starboard Green
Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.
Features:
Output: Starboard Green
Visibility: USCG2NM
Voltage: 10-30V DC
12V DC Amps: 18-26mA
24V DC Amps: 12-15mA
Conforms to: ABYC A16
|
58.49 |
|
|
Contour Series Inset Navigation Light - Stern White
Contour’s Drop-in series leverages a single, symmetrical universal pocket profile molded into the hardtop during manufacture. Mating draft angles and part radii have been carefully considered. Low profile, no exposed fasteners, and a clean, modern monochromatic design. Sold as Port, Starboard, or Stern.
Features:
Output: Stern White
Visibility: USCG2NM
Voltage: 10-30V DC
12V DC Amps: 18-26mA
24V DC Amps: 12-15mA
Conforms to: ABYC A16
|
58.49 |
|
|
B175M Bronze Thru-Hull 20° Tilt - Med Frequency
Features:
Frequency: Chirp 85-135 kHz
Power Rating: 1KW
Connector: 10 Pin
Tilt: 20 Degree
Deadrise of Hull: 16-24 Degrees
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1706.66 |
|
|
Sub-Reflector s6HD
Sub-Reflector Assembly for Intellian s6HD.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
383.99 |
|
|
J1939 Termination Resistor
J1939 Termination Resistor, Inline J1939.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
54.23 |
|
|
Tan 16 AWG Primary Wire - 100'
Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality.
Built from Type III class K tinned copper, this wire offers excellent flexibility. The tinned copper also resists corrosion adding to the life of the wire. What about the insulation? After the copper is tinned it is then insulated with a durable and flexible PVC jacket. The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.
What standards and compliances does this wire meet? Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.
Features:
Built for durability, flexibility, and longevity in the harshest marine environments
So flexible that you can tie it into a knot without compromising any of its qualities
Proprietary insulation ensures the highest level of protection available
Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals
Compliances:
UL Standard - 1426 BC-5W2
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
*Sold as an Individual
|
13.31 |
|
|
Pink 16 AWG Primary Wire - 100'
Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality.
Built from Type III class K tinned copper, this wire offers excellent flexibility. The tinned copper also resists corrosion adding to the life of the wire. What about the insulation? After the copper is tinned it is then insulated with a durable and flexible PVC jacket. The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.
What standards and compliances does this wire meet? Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.
Features:
Built for durability, flexibility, and longevity in the harshest marine environments
So flexible that you can tie it into a knot without compromising any of its qualities
Proprietary insulation ensures the highest level of protection available
Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals
Compliances:
UL Standard - 1426 BC-5W2
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
*Sold as an Individual
|
13.98 |
|
|
Black 16 AWG Primary Wire - 250'
Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality.
Built from Type III class K tinned copper, this wire offers excellent flexibility. The tinned copper also resists corrosion adding to the life of the wire. What about the insulation? After the copper is tinned it is then insulated with a durable and flexible PVC jacket. The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.
What standards and compliances does this wire meet? Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.
Features:
Built for durability, flexibility, and longevity in the harshest marine environments
So flexible that you can tie it into a knot without compromising any of its qualities
Proprietary insulation ensures the highest level of protection available
Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals
Compliances:
UL Standard - 1426 BC-5W2
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
*Sold as an Individual
|
32.89 |
|
|
Brown 16 AWG Primary Wire - 250'
Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality.
Built from Type III class K tinned copper, this wire offers excellent flexibility. The tinned copper also resists corrosion adding to the life of the wire. What about the insulation? After the copper is tinned it is then insulated with a durable and flexible PVC jacket. The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.
What standards and compliances does this wire meet? Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.
Features:
Built for durability, flexibility, and longevity in the harshest marine environments
So flexible that you can tie it into a knot without compromising any of its qualities
Proprietary insulation ensures the highest level of protection available
Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals
Compliances:
UL Standard - 1426 BC-5W2
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
*Sold as an Individual
|
32.89 |
|
|
Red 16 AWG Primary Wire - 250'
Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality.
Built from Type III class K tinned copper, this wire offers excellent flexibility. The tinned copper also resists corrosion adding to the life of the wire. What about the insulation? After the copper is tinned it is then insulated with a durable and flexible PVC jacket. The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.
What standards and compliances does this wire meet? Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.
Features:
Built for durability, flexibility, and longevity in the harshest marine environments
So flexible that you can tie it into a knot without compromising any of its qualities
Proprietary insulation ensures the highest level of protection available
Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals
Compliances:
UL Standard - 1426 BC-5W2
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
*Sold as an Individual
|
32.89 |
|