AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS   1/4 HP Totally Enclosed Motors (TEFC) 115/230 volts, 3.0/1.5amps Single or Three Phase Motors Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry 1/2 inch FNPT Ports Delivers up to 23 GPM and 26 PSI   Replacement For The Following Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25 Gusher: VBV-14   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.

AMT Pump 5760-95 1Hp 2"Npt 115V CI-SS Submersible Shredder Sewage Pump 5760-95, 130 GPM, 1.0 HP, Carbide Tipped Cast Iron construction with stainless steel motor housing 1.0 HP, 14 Amps, 115 volts, continuous duty, single phase electric motor Can handle solids up to 1 inch Triplex seal system 2 inch output port with a discharge rate of 7800 gallons per hour The AMT by Gorman-Rupp 5760-95 is an industrial grade shredder sewage pump that is designed to handle sludge and dirty water applications.  Features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging when pumping sludge type waste.  Liquid content still must be above 85% to keep from damaging the pump and possibly void the warranty.

Amt 4294-98 Centrif Pump, 1" Ss, Viton  1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   1/8 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts, 0.3/0.19 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 10 GPM 3/8 inch outlet diameter   Able to pump liquid down to 2 inches Replacement for to following Standard Machine Tool Industry Pumps  Fuji: VKP-053A Old Fuji: VKN-051A Mitsubishi: NQ-60J Toshiba: OPF-60M Hitachi: CPD-060M Yasukawa: VFPC-061DIF Graymills: IMV-08   Gusher: VBV-18

AMT Pump 4822-95 Rotary Hand Pump AMT Rotary Drum Pump 1" Suction & 3/4" Discharge Buna-N Shaft Seal Includes: Bung Adapter & Suction Tube Included Material: Cast Iron

AMT Pump 4861-97 Brz Centrifugal Pump 12V 1/8 HP, Totally Enclosed, Not Ventilated, 12 volt DC electric motor Salt water resistant Naval Bronze construction Semi-open, self-cleaning impeller that can handle solids to 3/16 inch diameter Buna-N mechanical seal and O-ring The AMT 4861-97 is a lightweight 12 volt pump that is designed for use in live tanks, chemical transfer, salt water and general dewatering applications.     Features durable bronze construction with 3/4 inch NPT input and output ports.  Pump is NOT self-priming and requires flooded suction. 

AMT Pump 5411-95 Coolant Pump Cast Iron Imm Cast Iron Immersion Type Coolant Pump Oil Coolant Pumps Fluid Port: 1 HP: 1 Impeller Material: Stainless Steel Phase: 3 1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460

AMT Pump 4821-95 Rotary Hand Pump Cast Iron Heavy-duty Cast Iron body with Buna-N seal 5 GPM @70 RPM (11 oz./stroke) Carbon vanes 0.75" suction x 1" discharge ports 0.75-Inch NPT steel discharge spout assembly (included) 1-Inch NPT x 40-Inch steel suction tube assembly (included) 2-Inch Cast Iron Bung adapter Maximum Temperature 160F Self-Priming Capable of handling compatible fluids with a maximum of 5,000 SSU viscosity at a minimum of 70 degrees F liquid temperature (roughly equivalent to SAE 40 motor oil) Liquids must be free of debris and solids for proper operation

AMT Pump 316A-95 Sewage/Trash Pmp 2" 3Ph 3Hp Self-Priming Electric Motor Driven Sewage / Trash  Pump 2" Cast Iron 3 HP 230/460V 3 Phase TEFC Motor Frame Size 56J Totally Enclosed and Fan Cooled Shaft Seal Material: Viton Silicon/Carbide

Amt 4850-K7 Pump Head Self Primer For  

Amt 4850-P7 Pump Head Self Primer For  

Amt 4851-P7 Pump Head Self Primer For  

Applications for the MDX-MT3-AM Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.    March Pump's industrial MDX-MT3-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 9 gallons per minute at 1 foot, and its maximum head is 28 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.125 Horsepower Compressed Air Motor which requires 21PSI.  The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March MDX-MT3-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Max Flow 9 GPM 34 LPM Max Head 28 FT 8.8 M Power .125 HP .093 KW Electrical 21PSI or 3CFM     Type Centrifugal Mag Drive Inlet 1/2"MPT Outlet 1/2"MPT Wet End Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring)

AMT Pump 394G-K5 Pump Head Only Ports: 3" Cast Iron Shaft Seal Material: Viton Silicon/Carbide