V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements. Features: For V-CAN Thrusters and BOW PRO models Connectors for two thrusters (4 channels) Open-air range is up to 10m Maximum range is up to 25m when unimpeded Specifications: Remote Control  Power supply 3 VDC CR2032 (1x)  Protection Class: IP66  Frequency: 433.92 Hz  Temperature Range: 0°C - 70°C (+32°F - 158°F)  Weight: 50 g (2 oz) Receiver  Power Supply: 8 VDC to 30 VDC  Maximum Current (per output): 8 A (at 30 Volts DC)  Protection Class: IP40  Frequency: 433.92 Hz  Temperature Range: 0°C - 70°C (+32°F - 158°F)  Weight: 800 g (28 oz) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MCU006 Vertical Remote Control  Total Control with ease and comfort.  Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions. A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.

Universal Remote Control Kit for RCL-50 and RCL-100 Searchlight  Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted. Compatible With: RCL-50 and RCL-100 *Not compatible with RCL 100-LED  In the Box: URC-102 Master controller URP-102 Point Pad™ Connectors Coaxial cable - 15' Instruction manual *Sold as an Individual  WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HRC1002 Multipurpose watertight hand held remote control 2 Button. HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 metres, a watertight deck plug and socket, and a support bracket for stowing after use.

Wireless Remote Control Kit f/701-MD & 720 Size Battery Switches Wirelessly operate your BEP motorized battery switches from a distance of up to 250 feet (80 meters) away. Control up to 4 separate 5A circuits such as 701-MD/720-MDO battery switches, anchor light, navigation lights, and courtesy lights. No more lifting hatches to turn on battery switches - it is now all controlled from the remote key fob. Control battery switches easily (On/Off) from the dock Remote has a rolling code for security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal Remote Control Kit for RCL-100 LED Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted. Compatible With: RCL-100 LED In the Box: Master controller (URC-103) Point Pad™ (URP-102) Connectors Coaxial cable - 15' Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RGB Remote & Controller Take full control of the RGB LEDs in the Roswell Offroad speakers with this easy-to-use controller and remote. Choose from any of 20 pre-programmed colors and patterns, or take the light show up a notch with 15 modes that react to your music as it plays. Features: RF Control (requires 2 AAA batteries) 15 music-responsive LED modes Conformally coated PCBs for marine durability Powers up to 215 @ 12V or up to 430 watts @ 24V of RGB LED’s 20 standard LED modes

R1 6.5" Marine Audio Package with RGB Remote & Controller - White If you’re searching for an all-in-one premium sound solution, the Roswell R1 Marine Audio Package has you covered. Everything boaters need to experience the world-renowned Roswell sound is included, featuring four R1 6.5" Marine Speakers along with their R1 650.4 amp, Cybox Bluetooth Controller, RGB Controller, RCA Cables, and Dual Zone Controller. Includes: (2 pair) R1 6.5" White Marine Speakers     (2) 2M 2-channel RCA cable (1) R1 650.4 Amplifier     (1) Dual Zone Volume Control (1) Cybox Bluetooth Controller     (1) RGB Remote & Controller

R1 6.5" Marine Audio Package with RGB Remote & Controller - Black If you’re searching for an all-in-one premium sound solution, the Roswell R1 Marine Audio Package has you covered. Everything boaters need to experience the world-renowned Roswell sound is included, featuring four R1 6.5" Marine Speakers along with their R1 650.4 amp, Cybox Bluetooth Controller, RGB Controller, RCA Cables, and Dual Zone Controller. Includes: (2 pair) R1 6.5" Black Marine Speakers     (2) 2M 2-channel RCA cable (1) R1 650.4 Amplifier     (1) Dual Zone Volume Control (1) Cybox Bluetooth Controller     (1) RGB Remote & Controller

HRC1004 4 Button Remote Control HRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use. Applications Designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. Features: Watertight 4 buttons

Remote Control Panel w/(2)2145 & (1)2146 Remote Control Contura Switch Features: Lockout slides reduce the risk of accidental switching For use with two ML-Series Switches and one ML-Series Automatic Charging Relay Includes labels illustrated only Over 500 individual labels available Specifications: Positions:3 Nominal Voltage:12V DC / 24V DC Height:4.75" (120.65mm) Width: 4.88" (123.95mm) Depth:2.00" (50.8mm) Weight:0.83lb (0.38kg) Included: (2) - 2145 - SPDT Remote Control Contura Switch - (ON)-OFF-(ON) (1) - 2146 - SPDT Remote Control Contura Switch - ON-OFF-ON WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Remote Control Panel w/(3) 2145 Remote Control Contura Switch Features: Lockout slides reduce the risk of accidental switching For use with ML-Series Switches Includes labels illustrated only Over 500 individual labels available Specifications: Positions:3 Nominal Voltage:12V DC / 24V DC Height:4.75" (120.65mm) Width:4.88" (123.95mm) Depth:2.00" (50.8mm) Weight:0.83lb (0.38kg) Includes: (3) - 2145 - SPDT Remote Control Contura Switch - (ON)-OFF-(ON) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP1040-10 SystemPod Pre-Cut for Garmin echoMAP™ 92sv/93sv / 94sv/95sv & Space On The Left for 9.5 Wide Guard NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

GP2600-10 SystemPod for 12" Wide Guard - Pre-Cut For Simrad NSS & B&G Zeus & 2 Instruments Instrument Cut Out Size:3.6" Hole The GP2600 Series for 12" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on the Gen3 NavPods.

GP1600-10 SystemPod Pre-Cut for Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments for 9.5" Wide Guard Instrument Cut Out Size: 3.6" Hole GP1600 Series for 9.5" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.