MS-RGBRC RGB Lighting Control Module with Wireless Remote Control Enhance your on-board audio entertainment experience with not only brilliant audio, but LED illumination options to match! The MS-RGBRC wireless remote lets you take control of your on-water experience to adjust the lighting of your Fusion RGB speakers. This portable wireless remote will function up to 10m from the speaker lighting control module, giving you the freedom to adjust the illumination from anywhere on your boat. Both static and dynamic color options are available, with the color easily selectable on the intuitive color select wheel.  Wireless Control of Your LED Illumination Enjoy full control of the illumination of your Fusion RGB speakers with the MS-RGBRC wireless remote control. The remote is portable and will function up to 10m from the speaker lighting control module. Static and Dynamic Color Options A range of colors are available in both static and dynamic modes with the RGB speakers to complement your music and enhance your on-board audio entertainment experience. Simply select any color on the remote’s color wheel or change modes to cycle automatically through predefined lighting patterns. Intuitive Touch Controls Adjusting the lighting of your Fusion RGB speakers is made easy with touch controls including an intuitive color-select wheel.  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RGB Remote & Controller Take full control of the RGB LEDs in the Roswell Offroad speakers with this easy-to-use controller and remote. Choose from any of 20 pre-programmed colors and patterns, or take the light show up a notch with 15 modes that react to your music as it plays. Features: RF Control (requires 2 AAA batteries) 15 music-responsive LED modes Conformally coated PCBs for marine durability Powers up to 215 @ 12V or up to 430 watts @ 24V of RGB LED’s 20 standard LED modes

R 6.5" Marine Audio Package with RGB Remote & Controller - Anthracite Grill When it’s time to #GetLoud and you’re starting from scratch, the Roswell R 6.5" Marine Audio Package comes ready to rock with every piece of the puzzle. Trade trips to the store for cruises to the sandbar with this all-in-one audio solution, including Roswell's R 6.5" in boat speakers, RGB controller, R1 650.4 amp, Cybox Bluetooth Controller, Dual Zone Volume Control, and every accessory boaters need to get on the water. Features: Anthracite grill color Includes: (2 pair) R 6.5" Marine Speakers     (2) 2M 2 Channel RCA cable (1)  R1 650.4 Amplifier     (1) Dual Zone Volume Control (1)  Cybox Bluetooth Controller     (1) RGB Remote & Controller

R1 6.5" Marine Audio Package with RGB Remote & Controller - White If you’re searching for an all-in-one premium sound solution, the Roswell R1 Marine Audio Package has you covered. Everything boaters need to experience the world-renowned Roswell sound is included, featuring four R1 6.5" Marine Speakers along with their R1 650.4 amp, Cybox Bluetooth Controller, RGB Controller, RCA Cables, and Dual Zone Controller. Includes: (2 pair) R1 6.5" White Marine Speakers     (2) 2M 2-channel RCA cable (1) R1 650.4 Amplifier     (1) Dual Zone Volume Control (1) Cybox Bluetooth Controller     (1) RGB Remote & Controller

R1 6.5" Marine Audio Package with RGB Remote & Controller - Black If you’re searching for an all-in-one premium sound solution, the Roswell R1 Marine Audio Package has you covered. Everything boaters need to experience the world-renowned Roswell sound is included, featuring four R1 6.5" Marine Speakers along with their R1 650.4 amp, Cybox Bluetooth Controller, RGB Controller, RCA Cables, and Dual Zone Controller. Includes: (2 pair) R1 6.5" Black Marine Speakers     (2) 2M 2-channel RCA cable (1) R1 650.4 Amplifier     (1) Dual Zone Volume Control (1) Cybox Bluetooth Controller     (1) RGB Remote & Controller

Universal Remote Control Kit for RCL-50 and RCL-100 Searchlight  Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted. Compatible With: RCL-50 and RCL-100 *Not compatible with RCL 100-LED  In the Box: URC-102 Master controller URP-102 Point Pad™ Connectors Coaxial cable - 15' Instruction manual *Sold as an Individual  WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Wireless Remote Control Kit f/701-MD & 720 Size Battery Switches Wirelessly operate your BEP motorized battery switches from a distance of up to 250 feet (80 meters) away. Control up to 4 separate 5A circuits such as 701-MD/720-MDO battery switches, anchor light, navigation lights, and courtesy lights. No more lifting hatches to turn on battery switches - it is now all controlled from the remote key fob. Control battery switches easily (On/Off) from the dock Remote has a rolling code for security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP1040-10 SystemPod Pre-Cut for Garmin echoMAP™ 92sv/93sv / 94sv/95sv & Space On The Left for 9.5 Wide Guard NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

GP2600-10 SystemPod for 12" Wide Guard - Pre-Cut For Simrad NSS & B&G Zeus & 2 Instruments Instrument Cut Out Size:3.6" Hole The GP2600 Series for 12" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on the Gen3 NavPods.

GP1600-10 SystemPod Pre-Cut for Simrad NSS7/B&G Zeus Touch 7 & 2 Instruments for 9.5" Wide Guard Instrument Cut Out Size: 3.6" Hole GP1600 Series for 9.5" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

MCU004 Remote Control for NavNet TZtouch & TZtouch2 Furuno's NavNet TZtouch and TZtouch2 Multi Function Displays have become widely utilized on a variety of helms and bridges. To enhance the various installations, Furuno has developed the MCU004, a versatile remote control unit that can be used with TZtouch and TZtouch2 units. The MCU004 Remote Control features a large rotary knob and joystick, which can be utilized as the RotoKey on NavNet TZtouch and for zooming in/out on both TZtouch and TZtouch2. In addition, the joystick allows you to pan around the chart and move the cursor on the screen. The remote also has dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. For those captains that have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU004 Remote Control is a perfect companion for any helm or bridge. Whether you are using the TZtouch Black Box and want to mount the MCU004 in the arm of the captain_s chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU004 is an ideal solution. Features: Rotary knob as well as a joystick to take the place of the RotoKey Allows users to zoom in and out Joystick functions like a mouse allowing users to move the cursor on the MFD screen Buttons for Edge Swiping, Home, MOB and more Single MCU004 can control multiple TZtouch and TZtouch2 displays Allows for toggling back and forth from one display to another WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FU80 Remote Control w/Display The FU80 (a manoeuvre controller) is a Follow Up remote which means that the rudder, when hand steering, moves to the commanded angle set by turning the knob to port or starboard. Features: 35mm x 25mm display Type approved Two mounting options - desktop and panel (flush) Network based with NMEA2000 cabling Backward compatible with AP24, AP28, NSE, NSO

Remote Control f/SEC Battery Chargers The 900-RC remote control is designed for use with the following battery charger models: SEC-1250UL, SEC-1280UL, SEC-2425UL, SEC-2440UL SEC-1245A, SEC-1260A, SEC-1280A, SEC-2425A, SEC-2440A The 900-RC Remote Control comes with 33' of cable. The Remote Panel can be used to power ON/OFF and also monitor the charging status from a remote location. Features: Push button ON/OFF LED indicator Comes with 33' of cable Applications: Test bench Automotive Marine Communications sites Battery back-up systems Hobby WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Follow-On Tiller Steer Control Head Features: Applications: Raymarine Evolution Autopilot Systems (Powerboats Only) Power Supply: 12V DC Via SeaTalkng  Mount: Flat, Rigid Surface Fully Waterproof Up to 4 Follow-On Tillers can be installed

Reactor™ Autopilot Remote Control Rugged, Water-resistant Remote Places Autopilot Control in the Palm of Your Hand Provides easy, convenient mode and steering control for your Garmin autopilot Gesture control for heading hold and course corrections lets you simply point the remote where you want to go Features a bright, sunlight-readable color display and an ergonomic design for comfort and control Programmable preset buttons allow quick access to your favorite functions Water-resistant design floats, in case it’s dropped in the water Boasting a bright, sunlight-readable color display and an enhanced user experience, the Autopilot Remote also features a comfortable ergonomic design and programmable presets for quick access to your favorite functions. You can control steering with ease. The remote even lets you use gestures for heading hold and course corrections; just point the remote where you want to go. No need to worry if the remote takes a trip overboard, because it’s water-resistant and it floats. The Autopilot Remote includes both wrist and neck lanyards as well as a mountable cradle. And with a 45’ range, it’s functional from anywhere on the boat. It’s never been easier to place autopilot control in the palm of your hand. For use with GHC 20 and compatible¹ chartplotters to control your autopilot. ¹Compatible chartplotters include GPSMAP 7x2/9x2/12x2 Touch, 10x2/12x2, 74/7600, 84/8600 and newer models. In The Box: Reactor autopilot remote control Wrist lanyard Neck lanyard Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.