|
XPTH-9-HW-MSI-T MEGA SI+/DI+ Dual Spectrum CHIRP Plastic Thru-Hull Transducer with Temp
MEGA Side Imaging+ Plastic Thru-Hull Transducer supports MEGA Imaging/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 30’ cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N.
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHRIP Max Depth: 1200ft (365m)
MEGA Side Imaging+ Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (m)
MEGA Down Imaging+ Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 125ft (38m), MEGA DI+: 1075-1150 kHz - 200ft (61m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
436.39 |
|
|
B619 20° Tilt Bronze Thru-Hull Transducer - 8-Pin
Minimize Your Drag
The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The bronze B619 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings.
Applications:
Cruising powerboats and sailboats
Sailboats
Features:
Depth only or Depth and temperature
Fixed 20° tilted versions for 16° to 24° hull deadrise
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze housing
Boat Size: Up to 9M (30')
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
197.99 |
|
|
RealVision 3D™ All-In-One Bronze Thru-Hull Transducer - 0° - 8M Cable
Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.
The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-200 also has a built-in fast response water temperature sensor for quick, accurate readings.
The RV-200 features a rugged cast-bronze through hull body suitable for fiberglass or wooden hulls. The RealVision 3D™ transducer elements are arranged with a 0° offset for boats with flat bottoms. The lowprofile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV- 200 works great on trailered boats too, and with no fairing block to cut, installation is a breeze.
What’s in the Box?
RV-200 Bronze All-In-One Through Hull Transducer with 8-meter (26-foot cable)
Anti-rotation bolt kit
Installation instructions
|
1319.99 |
|
|
B275LH-W Bronze Thru-Hull Transducer - 12-Pin
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The included high-performance fairing improves broadband performance at speeds over 30 knots (34 MPH).
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000')
25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500')
25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Bronze transducer housing with high-performance fairing for optimal performance at higher speeds
Recommended boat size: 8 m (25') and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2294.99 |
|
|
Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 6 Pin
010-10182-01
Connect our bronze, thru-hull mount transducer to your compatible device to receive depth and temperature data. This transducer has an operating frequency of 200 and 50 kHz; a beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz; and a 0 to 8 degree deadrise.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
278.52 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 0°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 20°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Bronze Thru-Hull with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.33 |
|
|
Bronze Thru-Hull Transducer w/ Temp, 600w (8-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Bronze Thru-Hull with Temperature
30 Foot Cable with 8-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.33 |
|
|
Bronze Thru-Hull Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
46/10 degree Beam Angles
Bronze Thru-Hull
8-Meter Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
352.00 |
|
|
Bronze Thru-Hull Transducer, 1kW (No Plug)
1 kW
50/200 kHz
28/8.5 degree Beam Angles
Bronze Thru-Hull
10 Meter Cable, no connector provided
MB1100 required for some applications - contact Furuno for more information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1045.33 |
|