85 Series Carbon Monoxide Propane Gas Alarm - 12V - Black Features: Green-On, Red-Alarm, Red/Green-Fault, Red Red/Green Green - End of Life During Alarm Move to Fresh Air, Call 911 Replace By: 60 Months After Sale Test Weekly - Press Test Switch

SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - Black Flush Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - Black Flush Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine 20" Black LED Lightbar - White Light with Red Halo Accent lighting is an easy way to customize the look of any boat or vehicle, and RIGID now offers a way to add style and function with the SR-L Series Light Bar. This 20 inch Light Bar offers users the latest LED technology paired with advanced optics to provide an ultra-wide 70-degree beam pattern suitable for lighting up the trail ahead. The halo provides a stylish accent color to any custom vehicle build, while the hidden mounting hardware and glossy outer trim further adds to the light bar’s sleek look.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting A 3-position switch is included, allowing the user to easily switch between the halo accent lighting to the forward-projecting light.  The SR-L Marine Series Lightbar offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series Lightbar makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Wide beam with firm cutoff on lower edge for minimum reflection Accent light can be used for low level ambient lighting

Combo Carbon Monoxide Propane Alarms Flush Mount - White Have a safe TRIP! Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms. Replace all Propane and CO alarms that are 5 years old or older. Install alarms listed for RV use. Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm. Features: Double-duty alarm - Detects both gas leaks and CO gas simultaneously Reliable - 12V power means no missing or dead batteries to replace Durable - Built for the extreme RV environment Approved - Meets RVIA/NFPA requirements End of Life Signal

65 Series RV Surface Mount Carbon Monoxide Alarm Features: Designed for the Rugged RV Environment - Ideal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels & Truck Advanced Technology - Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain Memory Scan™ - Retains the CO level that activated the alarm. After ventilation it is impossible to know what the CO level was unless your alarm has memory Micro Current Technology - Saves battery power Two Level Alarm - Low and High. Reliable - 12 Volt power means no missing or dead batteries to replace. Loud 85 dB Alarm Approved - Meets RVIA/NFPA requirements Specifications: Certified to CSA Std 6.19-01 (R2006)* Conforms To ANSI / UL STD 2034* Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7V Power Supply and Current Draw: 108 mA @ 12 VDC Operational Range: 12 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40°F to +158°F Case Size: 6.5'W x 3.5'H x 1.25'D * Testing Laboratory: ETL/Intertek

30 Series 12V RV Propane Alarm - White Meets requirements set by RVIA for LP Gas Alarms on RVs. Test/Reset Button - Mute alarm during ventilation. Tests all detector functions with 1 touch. No dangerous gas is required. The alarm is fully operational during the mute cycle and will re-alarm if hazardous conditions recur. Built for the extreme RV environment. UL listed for RVs and Unconditioned Areas. Specifications: Size: 6-3/8 in. W x 2-7/8 in. H x 1 in. D 1-year limited warranty Flush mount 12-Volt Color: White

30 Series 12V RV Propane Alarm - Black Meets requirements set by RVIA for LP Gas Alarms on RVs. Test/Reset Button - Mute alarm during ventilation. Tests all detector functions with 1 touch. No dangerous gas is required. The alarm is fully operational during the mute cycle and will re-alarm if hazardous conditions recur. Built for the extreme RV environment. UL listed for RVs and Unconditioned Areas. Specifications: Size: 6-3/8 in. W x 2-7/8 in. H x 1 in. D 1-year limited warranty Flush mount 12-Volt Color: Black

FM-65SW FM Series 6.5" 120 Flush Mount Square Marine Speakers - White Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm x 138mm (5-7/16" x 5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-65SB FM Series 6.5" 120 Flush Mount Square Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm x 138mm (5-7/16" x 5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Mount Cup Holder w/Blue LED Light - Stainless Steel LED Illuminated Flush Cup holder with Blue light Cut-Out: 3-3/4" O.D.: 4-1/4" Uses 12V battery power Comes with 6" wire leads Includes Thick Mounting Gasket, pad & 3/8" drain tube Fits cams, bottles & can coolers

Flush Mount Cup Holder w/Red LED Light - Stainless Steel LED Illuminated Flush Cup holder with Red light Cut-Out: 3-3/4" O.D.: 4-1/4" Uses 12V battery power Comes with 6" wire leads Includes Thick Mounting Gasket, pad & 3/8" drain tube Fits cams, bottles & can coolers