General Pump WM01 Valve Kit Contains: Part 103042, 316 SS Valve Assembly (6) Part 701115, O-Ring (6) Part 701117, O-Ring (6)   Use in Following Pump Models: WM0515C WM0815C WM1015C WM1615C WM2315C WM2415C WM3015C WM3615C WM4215C

Oberdorfer N11HDM-E12 Pump Less Clutch 1.25" Oberdorfer Pumps N11HDM, Acrylonitrile-Butadiene (NBR) Shaft Seal, 60 GPM, Mechanical Seal Type, BSPT Connection, Gear Pump, Mech, Bronze Gear - Pedestal   FEATURES Pump Body:Bronze Ports:1 1/4" NPT Flow:60 GPM Max Pressure:150 PSI Max Bearings:Self Lubricating Carbon Bearings Gears:Bronze Helical Gears Shaft Seal:Acrylic-Graphite packing is standard, Teflon Optional. Optional Lip Seals in Viton/Teflon or Buna, Mechanical Buna or Viton Seals. Shaft:Stainless Steel Shafts Motor / Drive:Direct drive is the recommended drive arrangement. This pump is suitable for belt drive applications without needing pillow block bearings to achieve acceptable pump life. Electric Clutch Drive Available. We have many motor options and can assemble for you.

Shurflo 8090-902-248 Pump 230V 100psi The 8000 series diaphragm pump is the most widely used Shurflo industrial pump. Shurflo 8090-902-248, Diaphragm Pump with 230 Volt AC Motor and 100 PSI Automatic Demand Switch. Nylon Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.4 GPM open flow.

MP Pump MP Pumps was organized in Detroit in 1942, shortly after America’s entry into World War II. Our first pumps were used in landing craft and other amphibious vehicles where quality and reliability were absolutely essential. After the war, we continued to grow along with our reputation for superior design, engineering and manufacturing of centrifugal pumps for wide variety of applications.   Industrial Pumps, Transportation Pumps, Agriculture Pumps, Marine Pumps, Petroleum Pumps & DEF Pumps.

Get 10% OFF an N76-46P Pump Body Today!   Flotec N76-46P Pump Body   This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass. The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.  For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN. N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN   Get Your Coupon Code Today!

  The Rule-Mate Series of Bulge Pumps feature a solid state water sensing technology that eliminates the need for a seperate float switch.  When water enters the bilge and reaches a certain height (2-3/4") a sensor turns the pump on.  After the water is pumped out, another sensor shuts the pump off.  The sensor's unique “field effect” technology will only recognize water. If a 100% concentration of oil is detected the pump will not activate. This is not a zero discharge prevention system. The result is the most technically advanced bilge pump available in the marketplace.     Now you can experience all the comforts of home at sea with Jabsco range of Deluxe Flush Marine Toilets.  Jabsco is proud to announce the launch of the complete range of Deluxe Flush luxury marine toilets, with the addition of the new 14" toilet. Designed for the discerning owner looking for luxury and comfort, the Deluxe Flush Range features space saving stylish design with minimal water usage and virtually silent operation.         Specials    Closeouts   Remanufactured    Rebates

WAR20LWLH Warfare™ Level Wind 20 Left Hand Reel The PENN® Warfare was engineered to be an extremely versatile all- around reel at an affordable price. It features a lightweight graphite frame and sideplates with aluminum frame rings for improved rigidity to prevent frame-flex.  HT-100 drag washers provide smooth drag under heavy loads. Line Capacity Rings eliminate the question of how much line you have left when fighting a fish.  Features: Lightweight graphite frame and sideplates Forged and machined aluminum spool Machined brass main and pinion gear HT-100 carbon fiber drag washers Instant Anti-Reverse bearing Line Capacity Rings Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 3 Braid Capacity Yd/Lb: 865/20 650/30 455/50          Braking System: Mechanical Color: Black/Red/Smoke Drag Material: HT-100 Drag Type: Star Drag Gear Ratio: 5.1:1 Mono Capacity M/mm: 435/0.38 290/0.46 265/0.49             Mono Capacity Yd/Lb: 475/15  315/20  290/25              Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 29" | 74cm     Reel Handle Position: Left Reel Size: 20 Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool

SHURflo 80-120-01, Reverse Osmosis Booster System 220VAC The Shurflo 80-120-01 Pump is used for home RO water systems. It is a enclosed reverse osmosis booster low voltage motor. 220 Volts AC Input 80 PSI bypass valve Up to 50 GPD Continuous Duty 0.25" quick connect fitting

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1423-4L - 4-Blade - 13" x 23 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1315-4L - 4-Blade - 13.5" x 15 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4-Blade - 13.25" x 17 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1319-4L - 4-Blade - 13" x 19 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1321-4L - 4-Blade - 13" x 21 Pitch The Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props. Proprietary Stainless Steel, TP17™ Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat. Large Free Flowing Exhaust Ports Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat. Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better. Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WAR15LWLH Warfare™ Level Wind 15 Left Hand Reel The PENN® Warfare was engineered to be an extremely versatile all- around reel at an affordable price. It features a lightweight graphite frame and sideplates with aluminum frame rings for improved rigidity to prevent frame-flex.  HT-100 drag washers provide smooth drag under heavy loads. Line Capacity Rings eliminate the question of how much line you have left when fighting a fish.  Features: Lightweight graphite frame and sideplates Forged and machined aluminum spool Machined brass main and pinion gear HT-100 carbon fiber drag washers Instant Anti-Reverse bearing Line Capacity Rings Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 3 Braid Capacity Yd/Lb: 580/20 435/30 305/50          Braking System: Mechanical Color: Black/Red/Smoke Drag Material: HT-100 Drag Type: Star Drag Gear Ratio: 5.1:1 Mono Capacity M/mm: 340/0.35 290/0.38 195/0.46         Mono Capacity Yd/Lb: 375/12  320/15  215/20           Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 29" | 74cm     Reel Handle Position: Left Reel Size: 15 Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool

MAX-LP-DLC-L Max DLC Left Hand Low Profile Reel Value-packed power and performance, the Max Digital Line-Counter low profile reel gets the job done day after day with 5 stainless steel ball bearings that provide smooth operation. 20 pounds of drag pressure and a lighted digital line-counter provide accuracy and power for a variety of situations. The addition of a bent handle and drag star translates into a more ergonomic feel for all day comfort. ' Features: Lighted Digital Line counter Dura brass Gears Multi disc drag system 5 Ball bearings Compact bent handle and star DTT warning system (Distance to Tip) Specifications: Anti-Reverse Feature: Instant Anti-Reverse Bearing Count: 5 Braid Capacity M/mm: 125/0.25 95/0.30 70/0.35             Braid Capacity Yd/Lb: 135/20 105/30 75/50            Braking System: None Color: None Drag Material: Carbon Fiber Drag Type: Star Drag Gear Ratio: 6.4:1 Max Drag Lb/kg: 20/9.0 Mono Capacity M/mm: 125/0.29 105/0.32 70/0.38       Mono Capacity Yd/Lb: 135/10 110/12 80/17            Pre-Spooled Yd/Lb: Not Pre-Spooled Recovery Rate: 26" | 66cm     Reel Handle Position: Left Reel Size: LP Reel Spool Material: Aluminum Spare Spool Material: No Spare Spool