|
AMT Pump 3152-95 Centrifugal Pump Cast Iron
Heavy Duty Straight Centrifugal Pump
HP: 5
Voltage: 230/460
Phase: 3
Type: Totally Enclosed, Fan Cooled
Motor Frame Size: 184JM
Shaft Seal Material: Buna-N / Stainless Steel
AMT Crossover Model for Flint & Walling C55A503T
|
1437.76 |
|
|
AMT Pump 2P7XZR Hatz Diesel Fire Pump
2" Engine Driven Portable High Pressure pump is cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.
Features
Removable/Replaceable Cast Iron Suction & Discharge Flanges
Discharge Port Rotates in 90 Increments
One Tool Serviceability, Tool Included with Engine Driven Models (Not with Kits)
Includes Strainer and Rubber Foot Mounting
Maximum Temperature 180 F
Specifications
Type: High Pressure Pumps
Series: 2" Engine Driven Portable High Pressure Pumps
Driver: Hatz Diesel 1B30
Seal Type & Elastomer/Faces: EPDM/EPR/CAR/CER
Tank Size (Gal/Ltr): 1.32 / 5.0
Run Time (Hr.): 2.7
Mounting: Roll Cage
HP: 5 HP
SUCTION: 2" NPT
DISCHARGE: 2" NPT
L 31" X W 22.5" X H 23.6"
Warranty: 1 Year
Product images are a representation only
|
6150.23 |
|
|
AMT 5750-99, Piston Drum Pump 1" NPT Discharge Port
PISTON DRUM PUMP
• All Polyethylene Construction
• Upper Temperature Rating: 158 degrees fahrenheit
|
74.59 |
|
|
Applications for the MDX-MT3-AM Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
March Pump's industrial MDX-MT3-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 9 gallons per minute at 1 foot, and its maximum head is 28 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.125 Horsepower Compressed Air Motor which requires 21PSI. The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March MDX-MT3-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Max Flow
9 GPM
34 LPM
Max Head
28 FT
8.8 M
Power
.125 HP
.093 KW
Electrical
21PSI or 3CFM
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring)
|
828.00 |
|
|
AMT Pump 5411-95 Coolant Pump Cast Iron Imm
Cast Iron Immersion Type Coolant Pump
Oil Coolant Pumps
Fluid Port: 1
HP: 1
Impeller Material: Stainless Steel
Phase: 3
1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
|
933.12 |
|
|
Yamada K80-AM Air Kit for NDP-80 Air Motor
NDP-80 AIR MOTOR RESEAL KIT,
(2) 640020 O'Ring
(2) 685444 Buna V-Packing
(2) 640029 O'Ring
(2) 711937 Pilot Valve (Spring 40,50,80)
(1) 771712 Valve Body (Gasket 40,50,80)
(2) 771738 Spool Cap (Gasket 40,50,80)
(2) 771740 Pilot Valve (Seat 40,50,80)
(2) 771742 Gasket 40, 50, 80
(2) 772689 Nylon Throat Bushing
(2) 832163 Pilot Valve Assy 80
(1) C-Spool Assembly Carbon Filled
|
477.06 |
|
|
March Mag-Drive Centrifugal Pump With 1/8Hp Air Motor
• Simple, versatile and reliable, March AC-3CP-MD and BC-3CP-MD Series pumps feature an “orbital” magnetic drive and leak-proof design. They are rated up to 10 GPM (33 LPM) flow and for heads up to 20.5 ft (4.5 m) (39 ft. [13 m] when driven by an air motor).
• Typical applications include film processors, ice makers, laboratory and medical equipment, vapor degreasers and marine air conditioning systems.
• All screws are type 18-8 stainless. The O-ring gasket is Buna-N rubber on AC models and Viton on BC models. The stationary spindle is ceramic. All plastic parts are Glass Filled Polypropylene Plastic. The thrust washer is ceramic. The Impeller Magnet is encased in Polypropylene on the BC models.
• Series AC-3CP-MD pumps are driven by 1/15 HP (.018 kw), 3200 (60 Hz, air cooled). Series BC-3CP-MD are 3450 rpm (50/60 Hz, blast-cooled), all motors are ball bearing motors. Air motors rated at 1/8 HP (.093 kw) are also available for certain environments. The 230-volt motors are all rated 50/60 Hz.
March Pump Mag-Drive Centrifugal Pump Air Motor 10GPM 3/4"FPT Inlet, 1/2"MPT Outlet
|
800.10 |
|
|
Oberdorfer SM20713CW-M1 SS Gear Pump Less Motor
|
7033.40 |
|
|
Oberdorfer SM41716PW-M1 SS Gear Pump Less Motor
|
9314.08 |
|
|
IWAKI MX-F403CFVX 2 X 1.5 MX-F PUMP LESS MOTOR
The MX Series pumps of magnetic drive pumps represent the latest state of the art design in non-metallic magnetic drive pumps.
Self-radiating structure – When fitted with a carbon bearing, the MX will allow for brief periods of dry running. The new “self radiating structure” (patented), in addition to the existing proven non-contact principle with front and rear supported spindle, greatly improves the ability to withstand cavitation and running against a closed discharge valve.
Split volute casing – The MX Series is the first resin magnet pump that uses a split volute pump casing that forms a vortex chamber. The volute limits the liquid flow from the impeller and returns it to the pump, which is efficiently guided to the discharge port to enhance overall efficiency.
MX Series pumps are highly recommended for use in various production processes such as filtering, spraying, washing, plating, chemical transfer/blending, and etching in surface treatment applications.
Suction Port: 2"
Discharge Port: 1.5"
Max GPM: 130
Used for
Chemical Blending
Water Treatment
Plating
Sodium Hypochlorite Generators
Bio-Fuels
Desalination
Fume Scrubbers
|
2863.96 |
|
|
IWAKI SMX-220CAVYU 1X1 SMX POLYPROPLENE PUMP LESS MOTOR
Pump Body:
GFRPP- Glass Fiber Reinforced Polypropylene.
Self-Priming to 13 Feet Maximum For Water.
Port Size:
1" Flanged Inlet and Outlet Ports.
Flow:
Up to 25 GPM (at zero pressure). 2.6 GPM Minimum Flow.
Pressure:
Standard Operating Point is 21GPM at 22 Feet of Head.
Impeller:
GFRPP- Glass Fiber Reinforced Polypropylene.
Shaft Seal:
No Seals On Mag Drive Pumps, FKM (Viton) Body O-Ring, EPDM Optional.
Shaft:
Alumina Ceramic Spindle.
Wetted Bearing
Materials:
Carbon Impeller to Shaft Bearing.
Alumina Ceramic Liner Ring.
PTFE Mouth Ring.
CFRPPS Rear Thrust Ring.
Motor:
Not Included. Requires Up To 1/2HP, 60Hz, 3450 RPM, 56C Frame Motor.
|
1387.20 |
|
|
IWAKI MX-250CV6 MX PUMP LESS MOTOR POLYPR
|
682.00 |
|
|
IWAKI MX-401CV7 MX PUMP LESS MOTOR
|
829.44 |
|
|
IWAKI MX-402CV6 PUMP LESS MOTOR 145TC
|
1810.56 |
|
|
IWAKI MX-F251CFVX 1X1" MX-F PUMP LESS MOTOR
|
1499.52 |
|