Cartridge Bilge Pump 1250 GPH The 1250 GPH incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 60 l/min - 952 GPH Capacity Straight: 73 l/min - 1150 GPH Amerpage: 3 A Fuse Size: 5 A Connection: 1 1/8"" Max Height: 112 mm - 4.4" Weight: 0.32 kg - 10.4 oz.

Flotec FPSE3200A Thermoplastic Sewage Pump Durable, corrosion-resistant thermoplastic construction with 2" solids handling makes the FPSE3200A a great candidate for variety of wastewater applications.   Automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Durable, corrosion-resistant thermoplastic construction   BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 4/10 MAXIMUM CAPACITY: 5250 GPH FLOW AT 10' LIFT: 2550 GPH SWITCH TYPE: Tethered SWITCH ON LEVEL: 12-1/2" SWITCH OFF LEVEL: 5-1/2" DISCHARGE PIPE SIZE: 2" MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE: 2" CORD LENGTH: 8' AMP DRAW: 8.5 amps VOLTAGE: 115v, 60 Hz RECOMMENDED BREAKER: 15 amps

Flotec FPZS25T Submersible Thermoplastic Sump Pump 1/4 HP Flotec's 1/4 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.   Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications   Switch Type: Tethered - Operates in 14" basins or larger Horse Power: 1/4 HP GPH: 3,200 Max Lift: 20' Solids Handling: 3/16" Discharge: 1.5" NPT Power Cord: 8', Grounded

Flotec FPZS33T Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FPZS33V Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded 

Flotec FPZS50T Submersible Thermoplastic Sump Pump Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1/5" NPT Power Cord:  8', Grounded

Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. FEATURES Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FP003414S Service Kit For F360AC Service Kit for Flotec FP0F360AC Cyclone Pump and Simer M-40, M40 Pumps with Oval Shaped Front Covers. Also Fits Older Pumps with Square Front Covers.   Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.

Flotec FP2211 2-Wire 4 Inch Submersible Well Pump, 115 Volts 1/2 HP 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   WARRANTY   3 year limited warranty     HORSEPOWER:  1/2   PERFORMANCE SERIES:  10 GPM   VOLTAGE:  115v, 60 Hz   NUMBER OF WIRES:  2 plus ground   BODY CONSTRUCTION:  Stainless Steel and Thermoplastic   MAXIMUM CAPACITY:  13.6 GPM   OPERATION RANGE:  20' to 150'   MAXIMUM DEPTH-TO-WATER:  150'   MAX PSI:  105 psi   PUMP DIAMETER:  3.78"   DISCHARGE PIPE SIZE:  1-1/4" NPT     RECOMMENDED BREAKER:  25 amp

Flotec FP3212 3-Wire 4 Inch Submersible Well Pump, 230 Volts 1/2 HP, 10 GPM 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   3 year limited warranty HORSEPOWER:  1/2 PERFORMANCE SERIES:  10 GPM VOLTAGE:  230v, 60 Hz NUMBER OF WIRES:  3 plus ground BODY CONSTRUCTION:  Stainless steel MAXIMUM CAPACITY:  14 GPM OPERATING RANGE:  20' to 150' MAXIMUM DEPTH-TO-WATER:  150' MAX PSI:  105 psi PUMP DIAMETER:  3.78" DISCHARGE PIPE SIZE:  1-1/4" NPT RECOMMENDED BREAKER:  10 amp

Flotec 3-Wire 4 Inch Submersible Well Pump, 230 Volts 1.5 HP, 10 GPM 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use. KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 300ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing WARRANTY 3 year warranty HORSEPOWER:  1-1/2 PERFORMANCE SERIES:  10 GPM VOLTAGE:  230v, 60 Hz NUMBER OF WIRES:  3 plus ground BODY CONSTRUCTION:  Stainless Steel MAXIMUM CAPACITY:  16 GPM OPERATION RANGE:  40' to 300' MAXIMUM DEPTH-TO-WATER:  300' MAX PSI:  170 psi PUMP DIAMETER:  3.78"   DISCHARGE PIPE SIZE:  1-1/4"

Flotec FP4222 Cast Iron Convertible Jet Pump 3/4 HP Cast iron convertible jet pumps can be used in shallow or deep well applications in " diameter wells or larger and are pre-set for 30-50 PSI operation. KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install 230 volt motor - see manual for 115 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  10.8 GPM (shallow setup) MAX LIFT:  25' w/ shallow setup / 100' w/ deep well setup MAXIMUM PRESSURE:  60 psi w/ shallow setup / 54 psi w/ deep setup PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 20 amp for 115v MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP4105 Cast Iron Jet Pump 1/2 HP New cast iron shallow well jet pump is ideal for wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water. KEY FEATURES Reliable performance at 25' depth to water or less Maximum pressures of 63 PSI and maximum pumping capacities to 5.1 GPM Pump housing is constructed of heavy-duty cast iron and is ready to install 115 volt 1/2 HP Fan cooled, completely enclosed motor 1" Suction Port and 1" Discharge Port WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  5.6 GPM FLOW at 10' LIFT and 40 PSI:  4.5 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  63 PSI PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  7.2 amps VOLTAGE:  115v, 60 Hz RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP4122 Well Pump 3/4Hp 115/230V Flotec Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1” NPT Discharge Ports, up to 14.4GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Flotec FP4212 Cast Iron Convertible Jet Pump 1/2 HP KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install dual-voltage 115v/230v motor - see manual for 230 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  7.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  7.1 GPM (shallow setup) MAX LIFT:  25' for shallow setup / 70' for deep setup MAXIMUM PRESSURE:  60 psi (shallow setup) / 54 psi (deep setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DRIVE PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1"NPT AMP DRAW (full load):  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)