|
Locking Collar Pole Light Mounting Base - 2-Pin - Stainless Steel
Features:
2-Pin
Plug-In Type Base
0° Rake
Construction:
Stainless Steel
Black Plastic
Water Resistant Slide Cover
Pigtail Leads
Fits: Figs. 1343, 1348, 1400, 1440, 1450, 1451, 1452, 1460 and 1470 Series
|
35.24 |
|
|
Shift Knob - 1-1/2" - Smooth Stainless Steel Finish
Features:
316 Cast Stainless Steel
1-1/2" Shift Control Knobs Fit Morse MY-3, MV-2, Twin and Single Controls with 3/8" -24 Threads
Meets ABYC Specifications
|
24.04 |
|
|
17" Rail Mount Flag Pole - 1/2" Diameter, Stainless Steel Staff Nylon Mount
Features:
Rail Mount Flagstaff
304 S.S. staff and Black Nylon Bracket
Diameter - 1/2"
Length - 17"
Bracket - 7/8" and 1" tube
|
25.14 |
|
|
Clamp-On Flag Pole - 1/2" Diameter Stainless Steel Clamp & Pole
Features:
Clamp-On Flagstaff
Pole made of 304 S.S.
Clamp made of 316 S.S.
Diameter - 1/2,
Length - 17",
Clamp Tube Size-7/8"
|
39.82 |
|
|
Command Ratchet Hinges - 18-1/2" - 316 Stainless Steel - Pair
Because of the success of the popular 9-3/8" long Command Ratchet Hinge, TACO developed the 18-1/2" long counterpart for longer applications. This heavy-duty, extended specialty hinge has one locking position at 105 degrees and is perfect for sun pads, bolsters, and lounge backrests.
Features:
Polished stainless-steel Type-304
Mounts above the deck
One locking position at 105-degrees
Can be used for seat backs up to 22" long
Single or double-seat capacity
Meets ABYC H-31 standards class B* application, 500 ft-lb. of torque load for pair
500-hour salt fog test
For cushions up to 4" thick
5-year limited warranty
*Sold as a pair
|
518.86 |
|
|
1-1/2"" NPT x 1-1/2" ID Stainless Steel Pipe to Hose Straight Fitting
Features:
Male NPT x Hose connection
#316 Stainless Steel
Sizes from 1/2" to 3"
Standard Flow
NSF-61 compliant
Suitable for use in potable water systems
|
24.67 |
|
|
2"" NPT x 2" ID Stainless Steel Pipe to Hose Straight Fitting
Features:
Male NPT x Hose connection
#316 Stainless Steel
Sizes from 1/2" to 3"
Standard Flow
NSF-61 compliant
Suitable for use in potable water systems
|
41.33 |
|
|
Shakespeare Style 4700 6" Extension Mast
Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like.
6" long
Stainless steel construction
Standard 1" - 14 threads, male upper, female lower
One inch diameter
Durable and attractive
|
24.58 |
|
|
Shakespeare Style 81-S Stainless Steel Swivel Mount
Shakespeare's Style 81-S Swivel Mount is a dual-joint, free-pivoting base mount for use with an appropriate Shakespeare upper bracket in deck or side mounting large or small antennas. The mount's versatile action fits almost any mounting location, and permits easy lowering of the antenna for clearing overhead obstruction. It requires a stand-off upper bracket.
The Style 81-S Swivel Mount is included in the Style 410-R Mounting Kit.
Stainless steel construction
Standard 1" - 14 threads
|
64.79 |
|
|
6187 Sleek & Compact Stainless Steel Rotatable 4-Way Ratchet Mount
Shakespeare's 6187 is made to the same high specifications as all the Shakespeare mounts. Electro Polished 316 Stainless steel ensures long-lasting strength in all conditions. Through its clever design, the 6187 has one single ratchet handle, which allows users to lower and twist the mount in one simple maneuver, moving the antenna through a full hemisphere of points to its required location without the need for additional tools, time, or support. The 6187 is also much reduced in size and offers a much sleeker and more aesthetically pleasing appearance than the comparable options.
Features:
Compact heavy-duty ratchet mount
316 stainless steel
Innovative patented design
Lower, raise, and twist the mount in a single motion
Standard 1"-14 threads
Cable slot for easy installation
Installation hardware not supplied
|
84.70 |
|
|
3187 Stainless Steel Ratchet Mount
Similar in design and appearance to the current 4187 mounts, the 3187 Stainless Steel Ratchet Mount is a versatile, free-standing mount with a four-way ratchet design. It can be used to mount vertical or horizontal surfaces (deck or bulkhead) and adjusted to a slanted surface.
Features:
Quick action release handle- easily raise & lower antenna
Standard 1" - 14 threads
Cable slot for easy installation
Matches 4187 bolt hole footprint
Installation hardware not supplied
|
43.19 |
|
|
Shakespeare 5250-AIS Skinny Mini
3ft. VHF Marine Band 3dB
End-fed 1/2-wave stainless steel whip
Designed to meet the broader bandwidth requirements of all popular AIS transceivers, this antenna mounts with ease. Its compact size will be welcome aboard any vessel. Chrome plated brass canister minimizes de-tuning.
Built for AIS transceivers
Sealed, tin-plated copper wire coil
Stainless steel whip (36")
Requires mount with center hole for passage of the supplied 15' RG-58 cable.
One section
PL-259 connector included
|
76.31 |
|
|
Shakespeare Style 5215 SQUATTY BODY® VHF Marine
36" LENGTH, 3dB
END-FED 1/2-WAVE STAINLESS STEEL WHIP
A favorite with Sailboat owners, this lightweight, low profile, stainless steel antenna is specially designed for masthead mounting.
Hermetically sealed, tin-plated copper wire coil
Stainless steel body and whip
SO-239 connector - cable sold separately
Mount: Stainless steel "L" bracket supplied, for mast mounting
One section
Shakespeare Limited Warranty: 2 years
technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
7 MHz
SWR:
1.5:1 @ 156.8 MHz
Impedance:
(Ohms): 50
Gain:
3 dB
Max Input (Watts):
50
DC Ground:
NO
Termination:
SO-239 connector
Height (feet):
3
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
67.02 |
|
|
Swivel Base Rod Holders
RH570XL
Stainless Steel Side Mount w/ Swivel Base Extra Long
This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
230.77 |
|
|
Swivel Base Rod Holders
RH575
Standard Angle 30°
Stainless Steel Flush Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
162.70 |
|