|
Shakespeare Style 396-1-AIS VHF Marine AIS
4' LENGTH 3dB
4' MAST MOUNT AIS ANTENNA
The 396-1-AIS has been specially designed to meet the broader bandwidth requirements of all popular AIS transceivers. Commercial-grade construction with a mast mounting sleeve.
Brass and copper elements
SO-239 connector at the base
Suggested Mount: U-Bolts included. Can be strapped to a larger mast using steel banding (not supplied)
One section
Coax cable sold separately
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency: VHF Marine Band
Bandwidth within 2.0:1 SWR: 6.0 MHz
SWR: 1.5:1 at 156.8 MHz
Gain: 3dB
Impedance (Ohms): 50
Gain: 3dB
Max. Input (Watts): 100
DC Ground: no (will read open-circuit with ohmeter test)
Termination: SO-239 at bottom of antenna
Height (feet): 4
Polarization: Vertical
Radiation pattern: Omni-directional
|
179.56 |
|
|
AIS 8' Galaxy AIS Antenna - 6dB Gain - Stainless Steel Ferrule
Cruise with confidence and communicate reliably over the AIS band using the Galaxy® AIS antennas. Specifically designed and tuned to work with all popular AIS transceivers.
Features:
Reduced length version
Specifications:
Antenna Length: 8ft.
Band: Broadband VHF
Antenna Gain: 6dB
Max. Input Power: 50 watts
SWR: Nominally 1.5:1 at 158 MHz
Bandwidth: 5 MHz within 2.0:1 VSWR
Ferrule: Stainless steel
Coax Supplied: 20ft. of RG-8/X
Connector Supplied: PL-259, not installed
Color/finish: Galaxy White
Polarity: Vertical
Impedance: 50 Ohms
DC Ground: DC Grounded - The antenna will read shorted on continuity test
Shakespeare Limited Warranty: 5 years
Includes: FME Cables
|
191.23 |
|
|
Shakespeare Style 5215 SQUATTY BODY® VHF Marine
36" LENGTH, 3dB
END-FED 1/2-WAVE STAINLESS STEEL WHIP
A favorite with Sailboat owners, this lightweight, low profile, stainless steel antenna is specially designed for masthead mounting.
Hermetically sealed, tin-plated copper wire coil
Stainless steel body and whip
SO-239 connector - cable sold separately
Mount: Stainless steel "L" bracket supplied, for mast mounting
One section
Shakespeare Limited Warranty: 2 years
technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
7 MHz
SWR:
1.5:1 @ 156.8 MHz
Impedance:
(Ohms): 50
Gain:
3 dB
Max Input (Watts):
50
DC Ground:
NO
Termination:
SO-239 connector
Height (feet):
3
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
67.02 |
|
|
End-fed, center loaded stainless steel whip
Head for the regatta! This super light-weight black VHF marine antenna is specifically built for sailboat racers. It won't add much weight, while delivering the performance you need. Its 15" center-loaded design delivers Unity Gain, and it comes with a black L-bracelet for mounting atop your mast. Its connector is gold-plated too.
Small and extra light-weight
Stainless steel whip
Black L-bracket included for mast mounting
One section
Band: VHF marine band
Max Input Power: 25 watts
Color/finish: Black
|
57.19 |
|
|
Shakespeare Style 5250 Skinny Mini
3 ft. (0.91 M) VHF Marine Band 3dB
End-fed 1/2-wave stainless steel whip
This compact, lightweight antenna is ideal for vessels where space is limited - bass boats and fishing vessels, for example. Its chrome plated brass canister minimizes de-tuning. Cable and PL-259 connector included.
Stainless steel whip
Sealed, tin-plated copper wire coil
Requires mount with center hole for passage of the supplied 15' RG-58 cable.
One section
|
76.31 |
|
|
Style 399-1M VHF 6dB
Collinear Phased 5/8-wave with two coaxial chokes to suppress cable radiation
The Style 399-1M is the same as the 399-1, but it has a special sleeve for mast mounting. A professional quality antenna in a compact package. This extra-duty antenna combines strength and performance for use where you really need the efficiency of a large antenna, but don't have room for one.
Brass and copper elements
Chrome-plated brass ferrule with standard 1"-14 thread
Aluminum sleeve for mast mounting
Suggested mount: 1-1/4" U-bolts are supplied. The 399-1M can be strapped to a larger mast using steel banding (not supplied)
Two sections: Base 75"; Tip 39" UPS shippable
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
(within 2.0:1 SWR): 5MHz
SWR:
1.5:1 at 156.8 MHz
Impedance:
(ohms): 50
Gain:
6 dB
Max Input (Watts):
100
DC Ground:
YES
Termination:
SO - 239
Height (feet):
9.5
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
287.93 |
|
|
B924 Class B AIS Transceiver with WiFi, Bluetooth & VHF Antenna Splitter - 2W CSTDMA
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
The most feature-rich 2W CSTDMA AIS transceiver in the B900 range. The B924 includes WiFi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC, or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible.
Exceptionally lightweight and completely weatherproof, the B924 delivers the very best (2W) AIS receive and transmit performance, so you see all AIS information and targets, even at maximum range. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient.
Features:
Certified AIS Class B – 2W CSTDMA
Integrated WiFi and Bluetooth
Integrated VHF antenna splitter
Global certification - USCG / FCC / Canada / Europe
SRT-AIS™ Transceiver Engine for superlative proven performance
FLEXI-FIT™ bracket system for easy, convenient, and secure installation
Internal high-performance GPS receiver and antenna (external antenna optional)
Water, pressure spray, and damp proof (IPx6, IPx7 certified)
Protected from vibration, shock, and extreme temperatures
Small and lightweight
Ultra-low power consumption – best in class
Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC
NMEA 0183 & NMEA 2000
Automated health and performance monitoring
Silent mode (transmit-off) function
Enhanced RF screening to protect against electromagnetic interference
Built-in power surge protection
Physical & Environmental Specifications:
Size (H x W x D): 150 x 115 x 45mm
Weight: 425kg
Operating temperature: -25°C to +55°C
Storage temperature: -25°C to +70°C
Ingress protection: IPx6 and IPx7
Electrical Specifications:
Supply voltage: 12V or 24V DC
Supply voltage range: 9.6V - 31.2V DC
Average current (at 12V): 280mA
Average current (at 12V) (wireless off): 245mA
Peak current: 2A
Average power consumption (at 12V): 3.4W
Average power consumption (at 12V) (wireless off): 2.9W
Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port
Connectors:
VHF antenna: SO-239
VHF radio: SO-239
GNSS: TNC
Power: 12-way circular multipole
NMEA 2000: 5-way Micro-C connector
USB: USB Micro-B
Data Interfaces:
NMEA 0183: 2 x bi-directional ports
NMEA 2000: NMEA 2000 Ed 3.101, LEN=1
USB: PC virtual com port for NMEA 0183 data
WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode)
Bluetooth: BT Classic 4.0, 7 concurrent connections
Standards Compliance:
AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5
Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008
Environmental standards: IEC 60945 Ed. 4
Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0
NMEA 2000: NMEA 2000 Ed 3.101
GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0
GNSS:
Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo)
Channels: 72
Internal/external antenna: Internal or optional external antenna
Time to first fix from the cold start: 26s
VHF Transceiver:
VDL access scheme: CSTDMA
Operating frequency: 156.025MHz - 162.025MHz
Channel bandwidth: 25kHz
Receivers/transmitters: 2 x receivers, 1 x transmitter
AIS receiver sensitivity (20% PER): -111dBm
AIS transmitter power: 2W (+33dBm)
User Interface:
Indicators: Power, transmit timeout, error, silent mode
In the Box:
1 x AIS transceiver
1 x Power and data cable (2M)
1 x VHF radio accessory cable
1 x FLEXI-FIT™ mounting bracket
Complete with screws & optional fixing tape
|
1284.00 |
|
|
B953 Class B AIS Transceiver - 5W SOTDMA with VHF Antenna Splitter
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
The B953 is a high transmit power (5W SOTDMA) AIS Class B transceiver that is small, and lightweight, yet delivers the very best AIS receive and transmit performance so you see more AIS information and targets at maximum range – all achieved with the least power consumption.
The B953 has an integrated VHF antenna splitter which enables the transceiver to share your existing VHF antenna without any loss of performance. With built-in intelligent connectivity, integrated next-generation GPS receiver & antenna, and a unique FLEXI-FIT bracket system, safe and secure installation is simple.
Features:
Certified AIS Class B – 5W SOTDMA
Integrated VHF antenna splitter
Global certification - USCG / FCC / Canada / Europe
SRT-AIS™ Transceiver Engine for superlative proven performance
FLEXI-FIT™ bracket system for easy, convenient, and secure installation
Internal high-performance GPS receiver and antenna (external antenna optional)
Water, pressure spray, and damp proof (IPx6, IPx7 certified)
Protected from vibration, shock, and extreme temperatures
Small and lightweight
Ultra-low power consumption – best in class
Guaranteed connectivity and interoperability with any chart plotter or PC
NMEA 0183 & NMEA 2000
Automated health and performance monitoring
Silent mode (transmit-off) function
Enhanced RF screening to protect against electromagnetic interference
Built-in power surge protection
Fail-safe VHF radio operation
Physical & Environmental Specifications:
Size (H x W x D): 150 x 115 x 45mm
Weight: 415kg
Operating temperature: -25°C to +55°C
Storage temperature: -25°C to +70°C
Ingress protection: IPx6 and IPx7
Electrical Specifications:
Supply voltage: 12V or 24V DC
Supply voltage range: 9.6V - 31.2V DC
Average current (at 12V): 245mA
Peak current: 2.5A
Average power consumption (at 12V): 2.9W
Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port
Connectors:
VHF antenna: SO-239
GNSS: TNC
Power: 12-way circular multipole
NMEA 2000: 5-way Micro-C connector
USB: USB Micro-B
Data Interfaces:
NMEA 0183: 2 x bi-directional ports
NMEA 2000: NMEA 2000 Ed 3.101, LEN=1
USB: PC virtual com port for NMEA 0183 data
Standards Compliance:
AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5
Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008
Environmental standards: IEC 60945 Ed. 4
Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0
NMEA 2000: NMEA 2000 Ed 3.101
GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0
GNSS:
Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo)
Channels: 72
Internal/external antenna: Internal or optional external antenna
Time to first fix from the cold start: 26s
VHF Transceiver:
VDL access scheme: SOTDMA
Operating frequency: 156.025MHz - 162.025MHz
Channel bandwidth: 25kHz
Receivers/transmitters: 2 x receivers, 1 x transmitter
AIS receiver sensitivity (20% PER): -111dBm
AIS transmitter power: 5W (+37dBm)
User Interface:
Indicators: Power, transmit timeout, error, silent mode
In the Box:
1 x AIS transceiver
1 x Power and data cable (2M)
1 x VHF radio accessory cable
1 x FLEXI-FIT™ mounting bracket
Complete with screws & optional fixing tape
|
1032.00 |
|
|
B954 Class B AIS Transceiver - 5W SOTDMA with WiFi, Bluetooth, & VHF Antenna Splitter
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
The B954 is the most feature-rich high transmit power (5W SOTDMA) AIS transceiver in the B900 range. The B954 combines Wi-Fi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible.
Lightweight and completely weatherproof, the B954 delivers the very best AIS receive and transmit performance with increased range and transmission priority. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient.
Features:
Certified AIS Class B – 5W SOTDMA
Integrated WiFi and Bluetooth
Integrated VHF antenna splitter
Global certification - USCG / FCC / Canada / Europe
SRT-AIS™ Transceiver Engine for superlative proven performance
FLEXI-FIT™ bracket system for easy, convenient, and secure installation
Internal high-performance GPS receiver and antenna (external antenna optional)
Water, pressure spray, and damp proof (IPx6, IPx7 certified)
Protected from vibration, shock, and extreme temperatures
Small and lightweight
Ultra-low power consumption – best in class
Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC
NMEA 0183 & NMEA 2000
Automated health and performance monitoring
Silent mode (transmit-off) function
Enhanced RF screening to protect against electromagnetic interference
Built-in power surge protection
Fail-safe VHF radio operation
Physical & Environmental Specifications:
Size (H x W x D): 150 x 115 x 45mm
Weight: 425kg
Operating temperature: -25°C to +55°C
Storage temperature: -25°C to +70°C
Ingress protection: IPx6 and IPx7
Electrical Specifications:
Supply voltage: 12V or 24V DC
Supply voltage range: 9.6V - 31.2V DC
Average current (at 12V): 280mA
Average current (at 12V) (wireless off): 245mA
Peak current: 2.5A
Average power consumption (at 12V): 3.4W
Average power consumption (at 12V) (wireless off): 2.9W
Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port
Connectors:
VHF antenna: SO-239
VHF radio: SO-239
GNSS: TNC
Power: 12-way circular multipole
NMEA 2000: 5-way Micro-C connector
USB: USB Micro-B
Data Interfaces:
NMEA 0183: 2 x bi-directional ports
NMEA 2000: NMEA 2000 Ed 3.101, LEN=1
USB: PC virtual com port for NMEA 0183 data
Wi-Fi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode)
Bluetooth: BT Classic 4.0, 7 concurrent connections
Standards Compliance:
AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5
Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008
Environmental standards: IEC 60945 Ed. 4
Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0
NMEA 2000: NMEA 2000 Ed 3.101
GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0
GNSS:
Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo)
Channels: 72
Internal/external antenna: Internal or optional external antenna
Time to first fix from the cold start: 26s
VHF Transceiver:
VDL access scheme: SOTDMA
Operating frequency: 156.025MHz - 162.025MHz
Channel bandwidth: 25kHz
Receivers/transmitters: 2 x receivers, 1 x transmitter
AIS receiver sensitivity (20% PER): -111dBm
AIS transmitter power: 5W (+37dBm)
User Interface:
Indicators: Power, transmit timeout, error, silent mode
In the Box:
1 x AIS transceiver
1 x Power and data cable (2M)
1 x VHF radio accessory cable
1 x FLEXI-FIT™ mounting bracket
Complete with screws & optional fixing tape
|
1423.20 |
|
|
Style 4018 VHF 9dB
Phased 1/2-wave elements in a collinear array with a coaxial choking sleeve to suppress cable radiation
The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight.
Brass and copper elements
Chrome-plated brass ferrules
Includes 20' RG-58 cable and a PL-259 connector
Suggested mount: Style 409-R or 410-R Mounting Kit for deck or side mounting
Two sections: base 162", tip 66"
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
(within 2.0:1 SWR) 3 MHz
SWR:
1.5:1 at 156.8 MHz
Impedance:
(ohms): 50
Gain:
9 dB
Max Input (Watts):
25
DC Ground:
NO
Termination:
20' RG-58
Height (feet):
19
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
467.51 |
|
|
VHF Antenna
4.5dB Gain
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
4' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 15 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
241.58 |
|
|
VHF Antenna Splitter
A splitter allows a signal to be shared across multiple devices. The VHF Antenna Splitter allows you to use the same antenna for an AIS receiver and a VHF radio.
Features:
Small robust VHF antenna splitter
IPx6 and IPx7
Multiplexes multiple devices to a single antenna
Zero performance loss
|
393.60 |
|
|
Shakespeare CENTENNIAL™ Style 5120 - Reduced Length Version
8' LENGTH, AM/FM Marine
8' LENGTH, AM/FM ANTENNA INCLUDES CABLE AND CONNECTOR
Continuing the tradition, Shakespeare's Centennial™ 5120 AM/FM antenna puts high-end features where high-end does the most good. When you're far from your favorite stations, this antenna helps bring them in loud and clear, without depleting your net worth.
Chrome-plated brass ferrule with standard 1"-14 thread
Includes 15' RG-62 cable and Motorola connector
Suggested mount: Shakespeare Style 4187 Ratchet Mount
One section
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
550-1600 KHz, 88-108 MHz
Impedance:
(Ohms): 93
Termination:
15' RG-62 cable, Motorola Plug
Polarization:
Vertical
|
99.36 |
|
|
826-VW 4' VHF Antenna - White
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
Features:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
800 GOLD Series:
Mount: Stainless steel double female ferrule for mounting 1"14 threaded base
Connector: Quality female SO-239 (UHF)
Cable: NOT Included
Use Digital's VHF/AIS cables and 2-DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
282.79 |
|
|
529-VB-S 8' VHF Antenna - Black
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
375.73 |
|