|
TP-01 T-Bar Mount f/GPS/VHF Antenna
Cost effective mounts for up to four (4) GPS/VHF antennas. Easy to install and ideal for both sail and powerboats.
Features:
Designed to fit up to four (4) GPS/VHF antennas
The aerial bar can be rotated during installation to determine the ideal position for each antenna.
Internal cable routing to ensure a neat appearance once installed.
Customisable height
Technical Specifications:
Material - Stainless Steel
Height - 9.36" (238mm)
In the Box:
Mount
Mounting hardware
Installation manual
*Sold as an Individual
|
525.83 |
|
|
DC™ 40 VHF Antenna
Use Garmin's VHF antenna with your DC 40 dog-tracking collar for better tracking with your Astro®.
Compatible Devices:
DC™ 40 Dog Tracking Collar
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.59 |
|
|
Tapered Radar Mast
For Radomes, Lights, Camera and GPS/VHF Antenna
Single combintation mount for radar, lights, GPS/VHF antennas, cameras or search lights, with each item perfectly positioned for maximum performance.
Features:
Undrilled top plate to fit any light
Install up to 4 GPS/VHF antenna
Hollow wings and stem allow hidden cabling
Compatible with all current 18" and 24" radomes
Small base footprint (same as Dual PowerTower)
Removable 'wings' for safe low cost shipping
|
1633.50 |
|
|
VHF Patch Cable for AIS & VHF Antenna Splitter
This 2M (6.5') patch cable has PL259 connectors that connect the Vesper Marine AIS VHF Antenna Splitter and your AIS WatchMate or VHF Radio.
Features:
2 x PL259 connectors
2M (6.5') long 50 Ω cable
This cable can be used as a patch between the AIS WatchMate and your Vesper Marine antenna splitter.
|
17.99 |
|
|
829-VW-S 8' VHF Antenna - White
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
All 8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
800 Series:
Mount: Stainless steel double female ferrule for mounting 114 threaded base
Connector: Highest quality female SO-239 (UHF)
Cable: Not included use our VHF/AIS cables and two DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
373.30 |
|
|
6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain
Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds.
Features:
Silver-plated outer conductor, copper inner conductor
• Stainless steel mounting sleeve
• Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage
• Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit
• Two sections: Base 110″, Tip 110″
Specifications:
Design: Collinear-phased 1/2-wave elements with choking sleeve
Height: 18' (5.48m)
Weight: 20lbs (9kg)
Gain: 8dB
Connector Type: SO-239
Suggested Mounting: 409-R or 410-R
Impedance: 50 ohms
Max Input Power: 150W
DC Grounding: No
Shakespeare Limited Warranty: 8 years
|
797.74 |
|
|
VHF Antenna Splitter
A splitter allows a signal to be shared across multiple devices. The VHF Antenna Splitter allows you to use the same antenna for an AIS receiver and a VHF radio.
Features:
Small robust VHF antenna splitter
IPx6 and IPx7
Multiplexes multiple devices to a single antenna
Zero performance loss
|
393.60 |
|
|
Replacement VHF Antenna
VHF Flexible (Whip) Antenna (146-174 Mhz)
Height: 6"
Works with most Icom VHF two way radios
|
12.60 |
|
|
CX4A Commercial AIS/VHF Antenna
Powerful AIS Tuned commercial VHF Antenna that will give you maximum AIS range. Has a SO239 antenna connector in the base of the Antenna and we recommend using this with low loss 50 ohm coax cable such as RG-213 for best performance (not supplied), particularly on long cable runs.
A very high quality 3dB AIS tuned GRP antenna which is ideal for professional and super yacht installation.
Specifications:
3dB AIS tuned GRP antenna
4ft long
Fit 1.25″ commercial grade fixing bases
|
142.80 |
|
|
476 18.5' Classic VHF Antenna
*THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically.
Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore.
Features:
Brass and copper elements provide a standard range and reception
Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install
Smooth, durable, high-gloss white/fiberglass finish prevents yellowing
VSWR of <1.5:1 at 156.8 MHz
Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below*
2-year warranty
Specifications:
Frequency: VHF Marine band
Bandwidth: (within 2.0:1 SWR): 10 MHz
SWR: 1.5:1 at 156.8 MHz
Impedance (ohms): 50 ohms
Gain: 10 dB
Max Input (Watts): 350W
DC Ground: Yes - Read Shorted
Termination: SO-239 connector
Height (feet): 18.5'
Polarization: Vertical
Radiation Pattern: Omni-directional
Suggested Mount: 483 Mast Bracket
|
1020.06 |
|
|
VHF Antenna
4.5dB Gain
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
4' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 15 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
241.58 |
|
|
826-VW 4' VHF Antenna - White
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
Features:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
800 GOLD Series:
Mount: Stainless steel double female ferrule for mounting 1"14 threaded base
Connector: Quality female SO-239 (UHF)
Cable: NOT Included
Use Digital's VHF/AIS cables and 2-DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
282.79 |
|
|
PHASE III 6396-AIS-R 4' AIS Antenna 3dB Gain
Specially engineered for the extra bandwidth required by AIS transceivers, this Phase IIIT antenna enables reliable communication over marine VHF frequencies.
Silver-plated outer conductor, copper inner conductor
Stainless steel mounting sleeve
SO-239/PL-259 connector
Specifications
Max. Power Input: 50 watts
SWR: Less than 1.5:1 at 162 MHz
Bandwidth: 5 MHz within 2.0:1 VSWR
Frequency: VHF AIS Marine Band
DC Grounding: Yes
Pattern: Omnidirectional
Polarization: Vertical
|
419.10 |
|
|
529-VW-S 8' VHF Antenna - White
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
347.44 |
|
|
529-VB-S 8' VHF Antenna - Black
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
375.73 |
|