|
1000mA (1 Amp) 12VDC Power Supply
12VDC
1 Amp
1000mA
|
19.20 |
|
|
1 Lamp DR Wiring Harness & Switch Kit
Universal Wiring Harness and Switch kit, (for 1 Lamp- DT connector), Universal Plug and Play Wiring Harness, with On-Off Rocker Switch, 12V DC Relay, 30A Fuse, With 2-pin DT connector for 1 Lamp only, With Waterproof Fuse Holder, Set includes Wiring Harness and Switch, Easy Installation, Use with one Heise Light Bar or Cube 22 inches or, smaller.
Features:
Universal Wiring Harness & Switch kit (for 1 Lamp, DT connector)
Universal Plug and Play Wiring Harness with On/Off Rocker Switch
12V DC Relay
30A Fuse
With 2-pin DT connectors for 2 Lamps
With Waterproof Fuse Holder
Set includes Wiring Harness & Switch
Easy Installation
Use with one Heise light bar 22 inches or smaller or any cube
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.22 |
|
|
Ampco GX5039902 Casing Gasket KC2 1 1/2 X 1
Ampco Pump Repair Part GX5039902 Gasket Casing/Cover. Designed for 1-1/4 X 1 (Nickle Aluminum Bronze/Stainless Steel), 1-1/2 X 1 (Nickle Aluminum Bronze/Stainless Steel) pump models.
|
26.73 |
|
|
ATP Wiring Harness & Switch Kit - 1 Lamp Universal
Features:
9 ft lead for light bar connector(s)
Universal wiring harness and switch kit (for 1 lamp, ATP connector)
Universal plug-n-play wiring harness with on/off rocker switch
12V DC relay
30A fuse
Use with 1 Heise light 160 watts or more
|
37.21 |
|
|
Jabsco Pump Head Only 1" Clamp 56C 10Gpm
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
1" ACME Threads with Bevel Seat or Clamp Type
Flow:
Nominal 10.1 USgallons/min (38.2 Litres/min) at 1750rpm
Pressure:
Pressure up to 2 bar
Impeller:
3A Food Grade Neoprene or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile
Shaft:
316 Stainless Steel
Motor:
115 Vac, Single Phase, 60Hz, 3/4 HP, 1750 RPM, TEFC, C-Face, 56C Frame
APPLICATIONS / CHARACTERISTICS
Handles soft solids - max. 8mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft).
DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk.
FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter.
BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines.
PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.
Jabsco Pump Head Only With Motor Bracket 316SS 1" Clamp Ports Neoprene Impeller Carbon Seal
|
3377.80 |
|
|
Jabsco Pump Head Only 1" Clamp 56C 10Gpm Hi Pres
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
1" ACME Threads with Bevel Seat or Clamp Type
Flow:
Nominal 10.1 USgallons/min (38.2 Litres/min) at 1750rpm
Pressure:
Pressure up to 2 bar
Impeller:
3A Food Grade Neoprene or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile
Shaft:
316 Stainless Steel
Motor:
115 Vac, Single Phase, 60Hz, 3/4 HP, 1750 RPM, TEFC, C-Face, 56C Frame
APPLICATIONS / CHARACTERISTICS
Handles soft solids - max. 8mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft).
DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk.
FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter.
BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines.
PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.
Jabsco Pump Head Only With Motor Bracket 316SS 1" Clamp Ports High Pressure Neoprene Impeller Carbon Seal
|
3377.80 |
|
|
Jabsco Pump Head Only 1" Clamp 145Tc 20 Gpm
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
1" ACME Threads with Bevel Seat or Clamp Type
Flow:
Nominal 21.5 USgallons/min (81.4 Litres/min) at 1750rpm
Pressure:
Pressure up to 2 bar
Impeller:
3A Food Grade Neoprene or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile
Shaft:
316 Stainless Steel
Motor:
115/230 Vac, Single Phase, 60Hz, 1-1/2 HP, H145 TC Frame, C-Face, 1740 RPM, TEFC, Overload Protected, Capacitor Start.
APPLICATIONS / CHARACTERISTICS
Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft).
DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk.
FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter.
BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines.
PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.
Jabsco Pump Head Only With Motor Bracket 316SS 1" Clamp Ports Neoprene Impeller Carbon Seal
|
3726.30 |
|
|
Ultra Pack Combo with Lithium Ion Battery & Charger
Ultra Pack Fishing Systems
The most impressive carry case system ever designed.
The Ultra Pack is the ideal name for the most feature packed ice fishing system ever offered by Vexilar. The innovative Ultra Pack System has a 12 volt, 9 amp-hour Vexilar Lithium battery enclosed inside the case, so you don’t need to connect or disconnect your battery after each use. A master power switch powers up your unit, and additional power posts give anglers the option of running other accessories. The case comes with an adjustable rod holder, cable storage cleats, battery charger and even your own Vexilar tackle box! The super tough Ultra Pack will fit into a five gallon bucket. All Ultra Pack Systems are factory assembled and tested here in the USA.
Features:
High profile for easy access to controls and great display visibility
Enclosed battery compartment with Vexilar Lithium 12 volt, 9 amp-hour battery. Includes digital charger
Quick charge jack plug for easy charging
Ultra Pack fits in a five gallon bucket
Adjustable rod holder fits on either side
Ice-Ducer® support eye-bolt has three pre-tapped mounting locations around base
External power posts for accessories
Master On/Off power switch
Non-slip bottom
The patented Ice-Ducer® system is a self leveling transducer with float for accurate transducer positioning every time
Cable storage and holding grips
Pre-drilled holes for optional accessories
Holder for the Ice-Ducer® transducer
Tackle box holder with tackle box included
Super strong handle with float holder
Available with the FLX-28 or FLX-30BB flasher from Vexilar, the world leader in flasher sonar technology
|
723.11 |
|
|
Digital Depth & Battery Gauge
The FL Digital Depth Indicator is the first digital display to show depth at all times when your Vexilar flasher is on while still being able to get the status of your battery with the touch of the button. The FL Digital Depth Indicator (model DD-100) gives anglers what they have been asking for, Digital Depth. Now you can easily and quickly attach the FL Digital Depth Indicator to your transducer cable from your FL series Flasher sonar and get an instant digital depth reading. Designed to fit in place of the popular D-130 or T-130 battery indicators, Vexilar has been selling for years. You can easily outfit your Pro Pack, Ultra Pack or Genz Pack with the DD-100.
The DD-100 not only gives you digital depth, but also gives you the battery status by pressing a button. When not in use, the DD-100 goes to sleep, so you no longer have to worry about draining your battery when not in use. Installation is easy. Simply unplug your transducer from the back of your Vexilar and plug into the DD-100 connector. Take the other end of the DD-100 and plug it into the back of your Vexilar. Attach the red power lead from the FL Digital Depth Indicator to the positive terminal post of your battery. A piggy-back terminal has been provided for easy connection to the Genz or Pro Pack. If you have an Ultra pack, please go to the Vexilar web site for detailed mounting instructions. Finally, place the FL Digital Depth Indicator where the old battery indicator was and attach with either plastic push pins or use a small bolt and lock nut.
Features:
Gives Any Vexilar Flasher the Ability to Show a Digital Depth Display
Can Be Used on Any Vexilar FL Series Flasher Ever Made, Including Older Hondex, Si-tex and Micronar FL-8's
Displays Battery Status By A Simple Push of a Button
Display Lighted for Use After Dark
Water Resistant & Easy Installation
Specifications:
Maximum Depth: 199 Feet
Power Draw OFF: 124uA
Power Draw ON: 21mA
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.40 |
|
|
12V - 12 AH Max Lithium Battery
Vexilar’s MAX Lithium Battery delivers 12 volts and 12 amps of power, the most in its class to be a drop-in replacement for existing 12-volt SLA batteries with half the weight. This battery is designed for the outdoor enthusiast on the go, with high capacity, a fast recharge time, rugged construction, and design features that make it ideal for portable summer and winter use. Great for fly-in trips too.
FH1000 Fuse Holder
Mounted on the positive terminal of your battery are a fuse holder and fuse. Vexilar knows your battery can cause fires if a dead short happens, so we have taken the added safety precaution to include this fuse holder with a 3 amp fuse for your battery.
It comes standard with a 3 amp automotive fuse, but you can put in a size fuse from 3 amp to 10 amps.
If your sonar system does not power up, check to see if the fuse or fuse holder is loose.
If your sonar system does not power up, inspect the fuse itself, if the wire inside the fuse is burnt, the fuse must be replaced
Yes, your Vexilar can run without the fuse holder by connecting directly to the battery, but please use it whenever possible for safety purposes.
If for some reason you’ve lost your fuse holder or would like to put them on all your Vexilar systems, they are available directly at vexilar.com, part number: FH1000
Lightweight and powerful, the V-200L 12 Volt, 12 amp-hour Vexilar MAX Lithium battery has been designed to replace any current Vexilar Flasher/Pack battery and may still allow the use of the 1 amp, fully-automatic Vexilar battery charger or the recommended new V-420L rapid charger.
Features:
Drop-in replacement for any current Vexilar Flasher/Pack battery
LiFePO4 technology
Delivers twice the number of battery re-charging cycles over sealed lead-acid batteries
Half the weight of the sealed lead-acid battery
|
98.40 |
|
|
UP30PV Ultra Pack Combo with Broadband Transducer, Lithium Ion Battery & Charger
Vexilar has delivered on the dream of developing a broad band flasher sonar with unmatched interference rejection and signal clarity. Based on the same easy to use, auto-ranging performance platform as the FLX-28, the FLX-30 offers the angler seven frequencies from which to choose, and with 20 IR settings, 140 combinations are available to kill interference once and for all! The magic begins with the world’s first broad band Ice-Ducer™ made from an array of dozens of small crystals. They deliver a wide sonar frequency band from a 19-degree beam at 160 kHz to an 8-degree at 300 kHz. Anglers can fine-tune the display to knock-out interference and sharpen target ID down to ¼". The FLX-30 features night mode, three power level settings, three zoom zones, three manual depth setting ranges to 300 feet and five color palette choices. With Vexilar’s legendary sunlight-readable, 525-segment resolution display now enhanced with broad band technology, it is safe to say you will never look at ice fishing the same way again!
The Ultra Pack carry case is the ultimate case design to hold the FLX-30. The Ultra Pack carry case is unique in that it has a totally enclosed 12 volt 9 amp hour lithium-ion battery that can power your Vexilar for days not hours. You use a master power switch to power up the system. The Ultra Pack has an oversize carry handle that can also hold your transducer float, four rod holder positions (one rod holder comes with the system) Three transducer support eye holes and a great cable management system. The Ultra Pack easily fits into a 5 gallon bucket and comes with would not be complete without a Vexilar tackle box and positions to mount other Vexilar accessories like the Flex-Light, Glo-Ring or more rod holders.
BONUS! A FREE soft pack carry case comes with every UP30PV. This system is ready to use right out of the box!
Features:
Seven frequencies from 160 to 300 kHz
140 interference rejection options (7 frequencies with 20 settings each)
Target ID down to 1/4"
Digital depth display
Day and night display brightness settings
Battery status and low-battery alert
Three power level settings
Three zoom zones
Three manual depth setting ranges to 300 feet
Five color palette choices
Long lasting brushless flasher technology
Vexilar’s exclusive broad band Ice-Ducer™ transducer and float
12 volt, 9 amp-hour, Vexilar Lithium battery
Fully automatic charger
Soft Pack carry case
Adjustable rod holder
Eye bolt for optional transducer support
Master power switch
External power posts for accessories
Custom Vexilar tackle box
Standard two-year limited warranty
Specifications:
Frequency: 160 kHz, 180 kHz, 200 kHz, 225 kHz, 250 kHz, 275 kHz and 300 kHz
Power output: 1,000 watts peak-to-peak (50 watts RMS)
Display resolution: 525 segments
Current draw: 300 ma at 12V DC
Dimensions: 4.4"H x 6"W x 2.5"D
Depth Range: Maximum 300 feet
Weight: 7 lbs 4.5oz.
|
1019.95 |
|
|
12V Lithium Ion Battery & Charger
Lightweight and powerful, the V-120L 12 Volt, 9 amp-hour Vexilar Lithium battery has been designed to replace any current Vexilar Flasher/Pack battery and still allow use of the 1 amp, fully-automatic Vexilar battery charger.
Features:
Drop-in replacement for any current Vexilar Flasher/Pack battery
LiFePO4 technology
Delivers twice the number of battery re-charging cycles over sealed lead-acid batteries
Half the weight of the sealed lead-acid battery
|
73.20 |
|
|
FLX-28 Genz Pack with Pro-View Ice-Ducer®
FLX-28 Genz Pack Fishing System Contains everything you need to start ice fishing. FLX-28 five-color flasher/fish finder Digital depth display Two zoom zones 20 step interference rejection Less than 1/4" target ID Auto and manual depth ranges down to 300 feet Day and night display brightness settings 12 volt, 9 amp-hour battery with automatic charger Battery status display Long lasting brushless flasher technology Vexilar Pro-View Ice-Ducer® transducer and float Standard two-year limited warranty.
Features:
FLX-28 five-color flasher/fish finder
Digital depth display
Two zoom zones
20 step interference rejection
Less than 1/4" target ID
Auto and manual depth
ranges down to 300 feet
Day and night display brightness settings
12 volt, 9 amp-hour battery with automatic charger
Battery status display
Long lasting brushless flasher technology
Vexilar Pro-View Ice-Ducer® transducer and float
Standard two-year limited warranty
Pre-drilled holes for optional accessories.
Easy access semi-enclosed battery compartment.
Transducer holder fits all sizes of Ice-Ducers
The FLX-28 five-color flasher from Vexilar, the world leader in flasher sonar technology.
Genz Pack case fits on top of a five gallon bucket.
The patented Ice-Ducer® system is a self leveling transducer with float for accurate
Transducer positioning every time. Includes the Pro-View Ice-Ducer®.
Transducer support eye-bolt hole (eye-bolt included).
Quick charge jack plug for easy charging.
|
767.94 |
|
|
FLX-30 Genz Pack with Broad Band Ice Ducer & Vexilar Lithium Battery
This FLX-30 Genz Pack has a unique brushless data transfer design system that allows for the creation of a breakthrough flasher display with digital depth and auto-ranging technology.
Features:
FLX-30™bb seven-frequency flasher/fish finder with 140 interference rejection options
Super-bright, sunlight-readable 5-color LED with five color palettes
Digital depth display in normal and high power modes
Three power modes: Low, medium, and high
Less than ¼” target ID
Three zoom zones
Auto and manual depth ranges down to 300 feet
Day and night display brightness settings
12 volt, 9 amp-hour, Vexilar lithium battery, and 1 Ah charger
Low battery alert
Long-lasting brushless flasher technology
Vexilar’s exclusive broad-band Ice-Ducer® transducer and float
Standard, two-year limited warranty
|
660.00 |
|
|
SP300 SonarPhone T-Box Portable Installation Pack
12V Portable Battery Pack to Take Your SonarPhone Anywhere!
The T-Box (SP300) options come in a portable system with a carry case to hold the battery and transducer cable. Your transducer is easily suction cup mounted on your boat. Easy to install on any boat, the skimmer style transdcuer and suction cup bracket can be used safely at speeds of 15 miles per hour. A safety cord is also supplied.
The SP300 comes with a 12V, 4.5 amp hour rechargeable battery and you also get a fully automatic 1 amp digital charger for rapid re-charging and with no worries of over-charging the battery. Your SP300 will run for nearly 20 hours on a single charge!
The SP300 T-Box has a powerful, dual-beam 20/40°, 200 kHz transducer for reaching depths of 240'.
The SonarPhone SP300 creates its own WiFi hotspot so it can be used anywhere in the world and does not require cell phone coverage. You can share your signal with as many people as you wish, the software app is downloaded for free from the App Store or Google Play and works with both Android and IOS systems.
Features:
Compatibility: iOS 4.3 (iPhone, iPad) and Android 2.0
Free App download
Automatic Ranging
Water Temperature and Depth Indicator
Audible Alarms for Fish, Shallow and Low Battery
Fish Icon
Zoom Bottom Track
Noise Rejection
Surface Clarity
Battery Indicator
1-year Vexilar Warranty
Specifications:
Depth Range Max: 240' (73M)
Portable carry case with rechargeable 12V battery enclosed
200/83 kHz Dual Beam with 20 and 40° cone options
High Speed skimmer-style transducer with 20' cable and suction cup mounting system
Requires 12V power supply
1 Amp, fully automatic battery charger
Wi-Fi signal transmit range of 300'
Run time over 15-hours of continuous use per charge
800W Peak to Peak
Touchscreem with split-screen zoom and bottom track control
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
135.62 |
|