|
Euro White 4" Tachometer 4000 RPM (Diesel) (Mechanical Takeoff & Var Ratio Alt)
Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator, or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole Size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N TD9123
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
88.19 |
|
|
4" Tachometer (6000 RPM) (Gas Inboard & I/O)
Perimeter-lighted Silver dial with bold Black graphics, polished stainless steel bezel, contoured Black pointer, and domed glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole Size: 3.375" (85 mm)
Specifications:
Domed, Scratch Resistant Lens
Stainless Steel Bezel
LED Illuminating around the Perimeter of the Dial
Factory P/N TC9476
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
111.83 |
|
|
Platinum 4" Tachometer - 7000 RPM (Gas - Inboard, Outboard & I/O)
Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.
All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole size: 3.375" (85mm)
Specifications:
Domed Glass Anti-fog, Scratch Resistant Lens
Stainless Steel Bezel
Blue LED Illuminating around the Perimeter of the Dial
Illuminated Backlit Fire-Orange Tip Pointer
Factory P/N TC8511
*Sold as an Individual
*Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
103.62 |
|
|
Chesapeake Black 4" Tachometer - 4000 RPM (Diesel) (Mechanical Takeoff & Var Ratio Alt)
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TD9127
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.06 |
|
|
Chesapeake White SS 4" Tachometer - 7000 RPM (Gas) (All Outboards)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9002
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
97.54 |
|
|
Euro Black 4" Tachometer - 4000 RPM (Diesel) (Mechanical Takeoff & Var Ratio Alt)
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Electronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N TD9122
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
89.59 |
|
|
Euro White 4" Tachometer 7000 RPM (Gas) (Outboards)
Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Perimeter-lighted White dial
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9003
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
77.23 |
|
|
Newport SS 4" Tachometer with System Check Indicator for Johnson/Evinrude Gas Outboard - 7000 RPM
The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.
Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations. Perimeter lighting makes reading these gauges easy to read Day/Night.
Features:
Perimeter lighted Retro White Dial
Black and Gray Graphics
Domed fog resistant lens
Two-piece Black pointers
Hand-polished Stainless Steel bezel
Studded connection for ring terminals
Red illuminated edge-lighting
Technical Specifications:
Operating Range - 0 to 7000 RPM and System Check Indicator
3.375" (85 mm) Mounting hole
Operating Voltage - 12/24 V
In the box:
Gauge
Mounting Hardware
Installation Manual
Factory P/N TC9491
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
204.47 |
|
|
Telematics 5" Tachometer 5000 RPM NMEA 2000® Gauge
Back-lighted white dial with bold black graphics, polished stainless steel bezel, light-piped fire red pointer and black hub, and domed glass lens.
Specifically designed to work with the leading engine manufactures. The MG3000 Black Fade offer the boat manufacturer and enthusiast the most cost effective options for engine monitoring.
|
410.07 |
|
|
SingleViu 100mm (4") Tachometer - 2500 RPM
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
201.32 |
|
|
SingleViu 100mm (4") Tachometer - 3000 RPM
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
201.32 |
|
|
SingleViu 100mm (4") Tachometer - 4000 RPM
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
201.32 |
|
|
SingleViu 100mm (4") Tachometer - 5000 RPM
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
201.32 |
|
|
Coral 4" Tachometer (7000 RPM) (All Outboard)
Perimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tachometer signal generator or magnetic pickup sender. The tachometer is hooked up to +12 VDC, Ground and one of the signal sources.
4"- Hole Size: 3.375" (85mm)
Specifications:
Scratch Resistant Lens
Black Aluminum Bezel
Contoured White Pointer
Factory P/N TC9036
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
77.21 |
|
|
Chesapeake White SS 4" Tachometer - 4000 RPM (Diesel) (Magnetic Pick-Up)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
4" - Hole size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TD9733
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
105.43 |
|