|
ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm
VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.
These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.
Features:
Connection - M4 Stud
Voltage: 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.68 |
|
|
ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 Ohm
VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.
These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.
Features:
Connection - M4 Stud
Voltage: 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.27 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
ALAS I Adjustable Fuel Sender - 6 to15-3/4" - 240-33 Ohm
For a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level! These fuel senders are engineered with a redundant dual-wiper system and a unique "quiet arm" (minimizes float movement).
The slotted SAE 5-hole flange mount provides versatility for sender mounting options, and the stainless steel float arms and pivot adjust 140mm to 400mm. So, for reliable performance you can count on--on the level--VDO ALAS I 12/24 V fuel senders deliver.
Features:
Connection - .25" Spade
Mounting Hardware - Included
Low Fuel Warning Contact
Voltage - 6 to 24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.01 |
|
|
ALAS I Adjustable Fuel Sender - 6 to 15-3/4" - 3-180 Ohm
For a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level! These fuel senders are engineered with a redundant dual-wiper system and a unique "quiet arm" (minimizes float movement).
The slotted SAE 5-hole flange mount provides versatility for sender mounting options, and the stainless steel float arms and pivot adjust 140mm to 400mm. So, for reliable performance you can count on--on the level--VDO ALAS I 12/24 V fuel senders deliver.
Features:
Connection - .250" Spade
Mounting Hardware - Included
Low Fuel Warning Contact
Voltage - 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.50 |
|
|
Wired Magnetic REED Switch
Magnetic reed switches are used to report unauthorized entry into a main cabin through a door or external hatch. Reed switches can be connected in series to monitor multiple entry points, providing secure protection against theft. In the event of unauthorized entry, the switches will trigger an entry alert to the boat owner, and can also be configured to sound an audible alarm on the boat.
Specifications:
Dimensions: 1x1in (2-part body, 0.5x1in each) 12in (wire)
Screw mount and adhesive mount included
Grounds directly to security input
Works with MTC and Siren 3 Pro
|
22.06 |
|
|
Adapt XE & XP Magnetic Reed Switch Power Clip
The RIGID Adapt XE Magnetic Reed power clip is used for additional power customization. Leaving the switch in place limits the light to consuming a maximum of 2.7 amps. When the switch is removed the light will consume up to 5.6 amps when all zones are activated on your Adapt XE LED dirt bike light.
*Sold as an Individual
|
10.26 |
|
|
Boat Outfitting Equipment and Supplies
When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.
|
|
|
Cockpit Marine 52mm (2-1/16") Fuel Level Gauge - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
E - 1/2 - F range
Works with all 240-33Ohm marine fuel senders
For 12V electrical systems
Connection: M4 Stud
Dial Scale: Single
Input Type: Analog
Mounting Hardware: Included
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
Cockpit Marine 85mm (3-3/8") 4 in 1 Gauge - Black Dial/Bezel
Displays - Oil Pressure, Water Temp (F°), Fuel Level, Voltmeter
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
Uses most common marine oil pressure, water temperature and fuel senders
Oil pressure 0 to 80 PSI - 240-33 Ohm 80PSI oil pressure senders
Water Temp. 100 to 250°F - 450-29 Ohm 240F/250F marine temperature senders
Fuel level - E to F - 240-33 Ohm fuel level senders
Voltmeter 8 to 16 VDC
Uses common 3/16"" (4mm) electrical ring terminal connectors
Fits common 3 3/8"" (85mm) dashboard holes
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
79.14 |
|
|
Cockpit Marine 85mm (3-3/8") 4 in 1 Gauge - White Dial/Bezel
Displays - Oil Pressure, Water Temp (F°), Fuel Level, Voltmeter
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
Uses most common marine oil pressure, water temperature and fuel senders
Oil pressure 0 to 80 PSI - 240-33 Ohm 80PSI oil pressure senders
Water Temp. 100 to 250°F - 450-29 Ohm 240F/250F marine temperature senders
Fuel level - E to F - 240-33 Ohm fuel level senders
Voltmeter 8 to 16 VDC
Uses common 3/16"" (4mm) electrical ring terminal connectors
Fits common 3 3/8"" (85mm) dashboard holes
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
79.14 |
|
|
Deep-Pipe Level Sender - 270mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 270 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
37.09 |
|
|
Deep-Pipe Level Sender - 270mm - 240 to 33 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 270 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 240 to 33 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
37.09 |
|
|
Deep-Pipe Level Sender - 270mm - 90 to 4 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 270 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 90–4 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
37.09 |
|
|
Cockpit Marine 52MM (2-1/16") Fuel Level Gauge - White Dial/Chrome Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.
Features:
E to F Range
Works with all 240-33Ohm Marine Fuel Senders
For 12V electrical systems
Mounting Hardware Included
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|