304 Stainless Steel Basket Strainer Only Size 4 for 1/2" Strainer Features: Perko 049300499D 304 stainless steel strainer basket for #4 (1/2"-NPT) Basket Measures 1-13/16"- DIA. X 4-1/16"-High Overall height with a hoop on top is 5-5/8"

Gianneschi ECOINOX-1-CE-12V Water System 12V Main Water Pressure System features:  A valid substitute mechanical control Compact size Constant flow with variable water demand Dry run protection Jet type self priming el/pumps in bronze or s/steel No accumulator tank needed Pre-set pressure system (no adjustments need) Reduced maintenance Port Size: From 1'' to 1'' 1/2 BPS

Oberdorfer 104M Series Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: to 23 PSI, 53 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor / Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.     APPLICATIONS / CHARACTERISTICS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.   Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.   Oberdorfers Centrifugal Pump 1/3HP ODP 115/230V Monel Shaft    

Oberdorfer 104M Series Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: to 23 PSI, 53 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor / Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.     APPLICATIONS / CHARACTERISTICS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures. Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.   Oberdorfer Centrifugal Pump 1/2HP ODP 115/230V Monel Shaft  

Sherwood R-30-G-1 WESTERBEKE PUMP For Westerbeke 6 Cylinder Diesel 24102 Pump Body: Bronze Ports: 1/2" NPT Cam: Full Impeller: Neoprene Shaft Seal: Mechanical Drive: Pulley Driven Pedestal Pump

Cat Pumps Crankcase Oil 2.5 Gallons   Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6105-2.5 contains 1  2.5 gallon container.

Cap Nut - 1/2" 8 Pieces Zinc Cap nuts are hammered on each end of roller shafts to create a long lasting solid connection. Features: Zinc plated 1/2" 8 per package

Ampco Pumps P1GXPIP-1/2 Plastic Cap Plug

Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V Myers ME40P-1 Cast Iron Effluent Pump Specifications VOLTAGE: 1ø, 115V, 60 Hz HORSEPOWER: 0.4 HP AMP DRAW (full load): 12.0 MOTOR TYPE: Permanent Split Capacitor (PSC) RPM: 1650 MAXIMUM HEAD: 32' MAXIMUM CAPACITY: 80 GPM SWITCH TYPE: Tethered Automatic MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36" DISCHARGE PIPE SIZE: 1-1/2" FNPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids IMPELLER TYPE: Cast Iron, Two-Vane Enclosed CORD LENGTH: 10' CORD SIZE: 16-3; Type: SJTW BODY CONSTRUCTION: Cast Iron MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

F2P10-19 12V IMP PUMP 1/2"

Groco Ha-1 1 1/2" 90 Discharge Cap  

8013 Mounting Panel for (1) 2-3/4" Meter Surface Mounts for Blue Sea Systems 2-3/4" Analog or Digital Meters. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

BURKS 375G6-2-5.88, BRONZE FITTED CENTRIFUGAL PUMP Closed coupled centrifugal pump having 2-1/2" NPT Inlet x 2" NPT Outlet features a voltage rating of 230/460 VAC 6.06 in impeller Bronze fitted   UNSPSC Code: 40150000

Applications for the March 893-07 Magnetic Drive Pump include computer cooling, photographic processing equipment, refrigeration systems, and water displays.    March Pump's industrial 893-07  is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and heat transfer. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushless Motor, available in 12 Volts.  The 12 Volt Motor has an operating range from 7 to 14 Volts.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 893-07 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Max Flow 2.7 GPM 11 LPM Max Head 10.6 FT 3.3 M Power .006 HP .004 KW Electrical 12V Range 7-14   Type Centrifugal Mag Drive Inlet 3/8"FPT Outlet 3/8"OD Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet

Scot Pump 48451X-1/2 HP MPU 1/2 HP 1PH Pump • Seawater Bronze case, impeller adapter • Seawater Bronze 7/8” shaft • Impeller keyed to stub shaft and secured by washer and locking assembly • O-ring case gasket    Motor • Standard NEMA frame motor • 1 and 3 phase