Light Diffuser for Type C & E Wedge Bulb - Red - 4 Pack Features: Red in color Application - Type C and E Wedge Bulbs *Sold as a 4 Pack WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Diffuser for Type C & E Wedge Bulb - Green - 4 Pack Features: Green in color Application - Type C and E Wedge Bulbs *Sold as a 4 Pack WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Jabsco 31631-0094 Parmax 4 24V Pump QF Toilet Jabsco Diaphragm Pump, Par-Max 4, 24V, Rinse Pump For Quiet Flush Toilet and also Fresh Water Delivery.

  In regions that aren’t fortunate enough to have good weather for boating all year round, Memorial Day signals the start of the sailing season. Be ready. Tune up, pump up, and polish!   Check your safety equipment, lines, hoses, and sails. Get ready to launch.   Here are a few handy tips to make your boating season run smoothly.   Paperwork Get your boating paperwork updated and in order. Permits, registration, decals, certificates, and licenses must be up to date. The Coast Guard, Marine Police, and the Conservation authorities may stop you and board your vessel to check for up-to-date permits and equipment. It is an excellent time to review your boater’s insurance policy. Check to see if your situation has changed and if you need additional coverage. Then, submit your paperwork as early as possible to avoid fines.    Onboard Systems Replace the oil filter and lubricate all parts; lower-case should be free of oil leaks Electrical systems such as fuses, spark plugs, and wires should be checked and adequately replaced Empty your fuel tank and refill it with fresh fuel and fuel treatments Flush the water tank Fully recharge your battery and fill the cells with distilled water All lines should be checked Inspect the propeller for damage or fishing line Check that hull is free of blisters and cracks The engine anode must be inspected every three months or less.  Replace boat anodes once a year.  Check your outboard anode yearly.  Check your prop shaft anode monthly.  Check the hydraulic steering system for proper fluid levels, leaks, and tilt Inspect the steering, shift, and throttle cable Check and change all of the fluid levels as appropriate, including engine oil, power steering, and coolant   Communication Clean all screens on GPS, VHF radio, chart plotters, and fish finders. Replace any batteries with fresh new ones. Check wires and fuses. Check and repair antenna mounts, speakers, and mics. Test communication equipment while tied to the dock.   Having a variety of communication options, according to CLR Marine VHF radios, cellular amplifiers, loud hailers, hailer horns, and mobile broadband options - helps you stay connected in a number of ways. “Having different options to reach out to people can bring peace of mind in a serious situation, and can also just help you have more fun while you are out enjoying the waterways."    Trailer If trailering your boat, pay special attention to wheel bearings, tires, and brake lights.   Dock Lines Check all dock lines for chafing and fraying. Better to replace than repair.   Safety Equipment Flares, throw cushions, life jackets. The intense sun can do a number on cushions and life jackets, and flares and fire extinguishers must be current before expiration. The Coast Guard, marine police, and conservation law enforcement take out-of-date safety equipment very seriously, and they enforce heavy fines if you are non-compliant.   Don’t forget the Docks Check all dock lights and electrical fittings for loose wires. Docks should have an emergency shut-off switch for electricity on the docks.   You will have a fun-filled boating experience if all of your equipment is clean and well maintained.   Fair Winds, Smooth Sailing ---------------------------------------------------------------------------------------------------------- Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. In addition, she has served as a past-Commodore of Great Lakes Fleet 21 - Chicago region. ©Copyright Cheryl Kuba, 3happycampers.com, 2022.  

Dock Edge Cleatlite Solar Dock Light w/ SS Mooring Cleat 12" These solar lights are mounted on top of a sturdy steel base, housed inside an attractive, Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries. Product Specifications: Part No.: 96-250-F Description: CleatLite, Solar Dock Light c/w SS Mooring Cleat

Dock Builders Cleat - Angled Aluminum Rail Cleat - 8" Features: Designed for aluminum framed docks Fits most OEM dock builder style docks with an aluminum extrusion Slides easily into place Angle allows for stronger hold

Dock Builders Cleat - Angled Aluminum Rail Cleat - 10" Features: Designed for aluminum framed docks Fits most OEM dock builder style docks with an aluminum extrusion Slides easily into place Angle allows for stronger hold

Corner Bumper Protect your vessel from damaging impact by using premium dock corners. This air-filled bumper is constructed from PVC with UV inhibitors and fungicides. Features a built-in air valve for inflation or deflation if necessary.

Stainless Steel LED (CREE) Docking Lights  These Docking Lights are constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Docking Lights  LED Docking Lights feature a sleek, contemporary design. Constructed of stamped 304 stainless for corrosion resistance. 32 super bright LEDs produce 180 lumens for excellent vision when docking. Surface mounted with two #8 RH fasteners (not included). Low amp draw of 0.28A @ 12V. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6' x 5' Inflatable Dock The 6x5 dock is constructed to comfortably fit up to 5 people with minimal tossing, turning, or tipping and is the optimal size as a maintenance platform. The inflatable dock was invented with one goal in mind: to create a floating “home base” on the water. Throw on some lounge chairs and a cooler, and you’ve created your own floating island to kick back with friends and family. Designed with premium-grade PVC & our state-of-the-art drop stitch technology, our inflatable docks feel rigid when inflated, and are incredibly light & compact when folded up. The concept is quite simple – they’re really just floating rectangles. But when you take a closer look, they become so much more – hang out on it, work off it, launch off it. The possibilities truly are limitless. Drop-stitch core - Drop-Stitch is constructed of thousands of polyester threads that connect the top and bottom pieces of PVC together. This technology allows for high-pressure inflation, creating a flat & rigid surface, with a solid feel. PVC Exterior Layer - The top layer of the inflatable dock is constructed with 1000 Denier, 3 Ply, PVC material. This premium-grade material is extremely durable, UV & Puncture Resistant, and tough enough to withstand harsh marine environments. Fabric-reinforced PVC rail - The inflatable dock’s exterior rails are double-reinforced to ensure seam durability and toughness. Its extra-reinforced exterior layer is designed to absorb impact from hard objects, so you can confidently tie up against other boats and docks. Features: Ties up to anything, anywhere Accommodates chairs, coolers, and more Doubles as a portable water sports launch pad Modular design for easy connection Equipped with high-pressure Halkey Roberts (HR) valve Additional 30 square feet of floating real estate Pet-friendly PVC material Equipped with (6) D-Rings to attach necessary tools Double-layered PVC rail eliminates the risk of hull damage when tying to your boat or dock Allows access to hard-to-reach spots you couldn't before Technical Specifications: Folded size - 21" x 15" x 7" Inflated size - 6' (L) x 5' (W) x 6" (H) Recommended pressure - 10 PSI Weight - 22 lbs In the Box: Floating dock Pump Carry bag Repair kit

8' x 5' Inflatable Dock The 8x5 dock is constructed to comfortably fit up to 6 people with minimal tossing, turning, or tipping and is the optimal size as a maintenance platform. The inflatable dock was invented with one goal in mind: to create a floating “home base” on the water. Throw on some lounge chairs and a cooler, and you’ve created your own floating island to kick back with friends and family. Designed with premium-grade PVC & our state-of-the-art drop stitch technology, our inflatable docks feel rigid when inflated, and are incredibly light & compact when folded up. The concept is quite simple – they’re really just floating rectangles. But when you take a closer look, they become so much more – hang out on it, work off it, launch off it. The possibilities truly are limitless. Drop-stitch core - Drop-Stitch is constructed of thousands of polyester threads that connect the top and bottom pieces of PVC together. This technology allows for high-pressure inflation, creating a flat & rigid surface, with a solid feel. PVC Exterior Layer - The top layer of the inflatable dock is constructed with 1000 Denier, 3 Ply, PVC material. This premium-grade material is extremely durable, UV & Puncture Resistant, and tough enough to withstand harsh marine environments. Fabric-reinforced PVC rail - The inflatable dock’s exterior rails are double-reinforced to ensure seam durability and toughness. Its extra-reinforced exterior layer is designed to absorb impact from hard objects, so you can confidently tie up against other boats and docks. Features: Ties up to anything, anywhere Accommodates chairs, coolers, and more Doubles as a portable water sports launch pad Modular design for easy connection Equipped with high-pressure Halkey Roberts (HR) valve Additional 40 square feet of floating real estate Pet-friendly PVC material Equipped with (6) D-Rings to attach necessary tools Double-layered PVC rail eliminates the risk of hull damage when tying to your boat or dock Allows access to hard-to-reach spots you couldn't before Technical Specifications: Folded size - 24" x 16" x 7" Inflated size - 8' (L) x 5' (W) x 6" (H) Recommended pressure - 10 PSI Weight - 26 lbs In the Box: Floating dock Pump Carry bag Repair kit

IntelliSkin® with GDS® for Apple iPad mini 4 The IntelliSkin® is a protective sleeve for the Apple iPad mini 4 featuring GDS® Technology. The IntelliSkin® will bring drop protection to your device and features an integrated connector which is molded directly into the skin. This prevents damage to the connector on your device from repetitious docking and un-docking. On the exterior of the skin are molded ruggedized docking contacts designed for repetitive docking and undocking. GDS Technology™ offers a standard connector interface which makes any device wrapped in IntelliSkin® compatible with any GDS® docking station. Features: IntelliSkin® offers drop protection as well as shelters your device from scratches and other debris The integrated connector protects your device’s connector and prevents damage due to repetitive plugging and unplugging IntelliSkin® features GDS® molded ruggedized docking contacts designed for repetitive docking and undocking The integrated GDS® connector makes the IntelliSkin compatible with all GDS® docking stations 3 year warranty “Made for iPad” means that an electronic accessory has been designed to connect specifically to iPad, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPad may affect wireless performance.

Nor'Easter M-Fender - 4' - White - 2 x 4 Mounting Monarch’s long-lasting, high-impact M- Fender is ideal for easy vertical mounting at marinas or home docks. The M- Fender is designed with a radius to fit onto a wide range of piling diameters. This gives a very clean installation that will enhance both the look and safety of any dock. Features: Color: White 6' 2 x 4 Mounting

Garmin 4ft Open Array Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68560 Vision Series Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424 xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately