RAM Tough-Tube Fishing Rod Holder w/3" Long Ratchet Spline Post Arm The RAP-394-SSTU consists of the TOUGH-TUBE fishing rod holder and 3" long ratchet spline post arm. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Easily integrate the RAP-394-SSTU to your existing spline post base, or choose from an assortment of RAM compatible bases. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: The "U" in the part number reflects product packaged in poly bag.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System (No Base) Unlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the patented RAM Rubber Ball and Socket Feature, but a ratcheting feature as well, there is literally no limit to where this holder can be put or how it can be fished. With RAM, you're never limited by your mounting equipment. No matter whether you're on the water to lose stress, or gain tournament dollars, RAM Rod Holders only add to your success. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM-ROD 2007 Fishing Rod Holder with Single Socket for 1.5" Diameter Ball Bases The RAP-340NB consists of the RAM-ROD 2007 rod holder and single socket for 1.5" diameter ball bases. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and patented ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done! Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM-ROD® 2007 Fishing Rod Holder with Track Ball™ Base The RAM-ROD® 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the unique ball and socket technology, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This kit includes a Track Ball™ for connecting to virtually any track system including the RAM Tough-Track™.  Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in a poly bag

RAM-ROD 2007 Fly Rod Jr. Fishing Rod Holder with 5 Spot Mounting Base Adapter The RAP-341-5 consists of the RAM-ROD 2007 Fly Rod Jr. rod holder, single socket and 5 spot mounting base; this compatible with the RAP-114-5PU and RAP-114-5U. Offering the patented RAM rubber ball and socket system feature, you can rotate the rod holder 360 degrees and tilt it forward and back for the optimum angle. Ideally suited for spinning reels and bait casters, the RAM-ROD 2007 provides smooth action when inserting or removing your fishing rod, yet holds firm in rough water while trolling. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM-ROD 2007 Fly Rod Jr. Fishing Rod Holder (No Base) The RAP-341NB consists of the RAM-ROD 2007 Fly Rod Jr. rod holder and single socket for 1.5" diameter ball bases. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and patented ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done! Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Adjustable All-Angle Fish Rod Holder Mounted Kayak/SUP Rack No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.   With Magma’s Fish Rod Holder Mounted Removable Kayak / SUP Rack your problems are solved.  This convenient storage rack, easily attaches to most standard fish rod holders, has been constructed from 1” Dia., 304 marine grade Stainless Steel tubing, aircraft quality hard anodized 356 aluminum, and includes stainless steel attachment fasteners.  Designed to fit most standard fish rod holders up to 1-1/2” (38mm) inside diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s patented LeveLock® all-angle adjustable mounting bracket and the Pow’rGrip adjustable quick release rod holder system allows each arm to be instantly installed and adjusted without tools.  Each arm comes with pre-installed UV resistant padding and has two tie-down attachment points for securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.   Whether you’re new to water sports or a seasoned veteran, this rack is a must have for the paddling enthusiast who’s always on the go. Features: Holds a single kayak or 2 or more standard SUP’s Allows quick installation or removal without tools for convenient storage Technical Specifications: Material - 304 Marine grade Stainless Steel Bracket Height (w/o mount) - 26.84" (68.18 cm) Weight (Pair) - 12.4 lbs (5.63 kg) *Sold as a Pair

RAM Tube Jr. Fishing Rod Holder with Short 4" Length Post Spline & Flush Mounting Base Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The flush mounting base contains 4 pre-drilled holes and a socket compatible with RAM-ROD and RAM-TUBE holders with a spline post. Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM-TUBE 2000 Holder with 6" Long Spline Post (No Base) The RAM-301-NB consists of the RAM-TUBE 2000 fishing rod holder and 6" long ratchet spline post arm. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Easily integrate the RAM-301-NB to your existing spline post base, or choose from an assortment of RAM compatible bases. Tube Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Tube Jr.™ Rod Holder with Spline Post, Extension Arm and Track Base This track mounting solution includes the versatile RAM Tube Jr.™ fishing rod holder (RAP-390-NPU) and is compatible with the RAM Tough-Track™. An excellent addition to the left side of your boat, the Track Base is designed to not loosen while trolling. Features: Quick release and installation High strength materials ensure product longevity Compatible with spinning reels and level wind reels Position spinning reel to the side or under RAM Tube Jr. Compatible with left-handed and right-handed reels Lifetime warranty T-Bolt Dimensions: .48" x .95" Made in the U.S.A. Material:  High Strength Composite  Note: Part number reflects product packaged in retail bag for store shelf display.

RAM ROD® Fishing Rod Holder with Dual T-Bolt Track Base This track mounting solution includes the high-strength composite RAM ROD® fishing rod holder, 6” spline post, and dual T-bolt track base. Compatible with the RAM® Tough-Track™ and designed to not loosen while trolling, this track base makes an excellent addition to the left side of a boat. Paired with the included spline post, easily rotate the RAM ROD® fishing rod holder 360 degrees while tilting the cradle forward and back to achieve the ideal angle. Features: Kit includes RAM ROD® fishing rod holder, 6" spline post, and dual T-bolt track base Compatible with all versions of the RAM® Tough-Track™ RAM ROD® fishing rod holder can be rotated 360 degrees and tilted to achieve the desired angle Backed by a lifetime warranty Specifications: Hardware Included: (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 6 in. post length  T-Bolt Dimensions: 0.48 x 0.95 inches Hole Pattern: 3.5 inches Materials: High-strength composite Packaging Type: Retail bag Weight: 1.11 lbs.

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base The RAM-114-RBU consists of the RAM-ROD 2000 fishing rod holder, ratchet arm with single open socket and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base The RAM-117U consists of the RAM-ROD 2000 fishing rod holder, double socket arm and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.  Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag