Shurflo 3300-101 Balast Pump 12V 12Gpm 12 V 720 GPH Electric Impeller Ballast Pump   Specifications Amperage: 15 A Dimensions: 6.62" x 4.75" x 6.61" (168 mm x 121 mm x 168 mm) Port Size Flow Rate: 720 GPH (12 GPM) Voltage: 12 V Features 12 volt DC Sealed Corrosion Resistant Electro-Coated Motor 14 AWG Lead Wires Reversible Flexible Impeller Bronze Pump Body Self-Primes up to 4' vertically Ports: 1/2" Internal Pipe Threads 1" External Hose Barb Ignition Protected CE and IMCI certification  

Mate USA M164-406-12 12V 101.5 PSI 4.8 GPM EPDM SEAL UP10-XA pump for weed killers 4.8 gpm - SS AISI 316   Self-priming electric pumps for transferring of liquids up to 101.5 psi pressure.  Pump body and connections in stainless steel.  Main application: High pressure spraying of aggressive liquids.   Part #: 16440312 Product Name: UP10-XA Voltage (V): 12 Consumption (A): 11 Fuse (A): 25 Self-priming (ft): 9.8 Flow rate (gpm): 4.8 Pressure (psi): 101.5 Seal: FKM Ports (BSP): 3/8" Hose (ID) (in): 1/2" IP Protection: 67   Motor power (W): 360

101 Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

101 Actuator- 24 Volt- 2-1/4  Stroke with Mounting Hardware The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 24 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Premium Impeller Kit 95 x 24 x 101.5mm - 12 Blade - Spline Insert Replaces JMP 8350-01, Johnson Pump 09-705BT-01, Sherwood 18000K. Specifications: Weight: 0.716 kg Dimensions: 95 mm x 24 mm x 101.5 mm Type: Copolymer Neoprene Original MC Blend Certification: ISO 9001 Quality Guaranteed

Premium Impeller Kit 95 x 24 x 101.5mm - 12 Blade  - Double Flat Insert Replaces JMP 8359-01, Sherwood 29000K. Specifications: Weight: 0.728 kg Dimensions: 95 mm x 24 mm x 101.5 mm Type: Copolymer Neoprene Original MC Blend Certification: ISO 9001 Quality Guaranteed

Oberdorfer 5923 Machine Screw For 101 111  

Oberdorfer 5922 Stud For 101 111  

Oberdorfer 5887 Stud For 101 111  

Oberdorfer 5881 Mtg Foot For 101  

Oberdorfer 5875 Drive Shaft For 101 &Amp; 111  

Delrin Mounting Pin for 101 & 102 Actuator (1.5") - Pack of 2. Specifications Lenco Part #: 15087-001 (Pack of Two) System Type: Single or Dual Actuator Compatibility: Any Boat WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

March 0809-0173-1000 Brush 809-101-13 12Vdc  

101 Oar Collars - Pair Made of rugged, flexible polyethylene. Adjustable and Long wearing. Quick and easy to install (fasteners supplied). Can be trimmed for smaller oars. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Jabsco 92000-6056 O'Ring 2.62 X 101.28 PTFE