|
BERKELEY S15094, SET OF PACKING RINGS
|
258.44 |
|
|
Ampco Pumps P1SX015098006 17-4 Sleeve
|
42.53 |
|
|
MP Pump 35098 Cent Pump SS 24V
|
406.58 |
|
|
Turning Point Hub Kit: 509
Features
Lifetime Warranty
Never buy another hub kit system again
Inner splines adapt to the engine
Outer hub compatible with different props
Reduce gear shock & engine/drive damage
Save up to 30% when purchasing a replacement prop
Eliminate propeller vibration & chatter
Eliminate hub cracking & failure
Corrosion resistant materials - brass splines
Reduce gear shock & engine/drive damage
Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.39 |
|
|
Please, i've look everywhere, and came up with no luck. If someone could help mate find his map of the California delta. It for a Garmin 180 G chart MGUS509ss. It takes you from San Francisco to Sacramento California. Thank you.
|
|
|
Battery Powered Bimini - Black Anodized Frame & Navy Fabric
Enjoy the convenience of a powered canopy with the SureShade Battery-Powered Bimini. It easily installs on your pontoon boat without the hassle of complicated wiring. Retract and extend the shade from the battery-powered receiver. This model has a black anodized frame and navy canopy fabric.
Features:
Easy to install and mounts to most pontoon rail profiles
The telescoping frame fits pontoon boats 92-102 in. wide; the canvas is 10 ft. long
The marine-grade canvas easily withstands the harsh elements
No running wires through the frame
Enjoy an average of 30 bimini open and close operations on one two-hour charge
Retract or expand with the push of a button
For pontoon boats with no bimini or manual tops
Specifications:
Bimini Style: Power (rechargeable battery)
Voltage: 20V
What's Included:
Battery kit (2)
Navy canvas
Poles
Mounting hardware
Black frame assembly
Easy Installation
Enjoy the ease of a power pontoon bimini without the hassle of the wiring through the bimini frame. The receiver easily mounts to the boat deck floor underneath the helm station. Ideal for pontoon boats with a manual bimini or no bimini. This bimini's telescopic frame fits pontoon boats 92–102 inches, and the canvas is 10 feet long.
Kit Has Everything You Need
This power bimini top kit has everything you need, including bimini canvas, poles, mounting hardware, a frame, two batteries, and instructions. This battery-powered bimini can be installed by boatbuilders or boat owners. Charging the receiver is a snap, and you’ll enjoy up to 30 retractions and extensions with just one two-hour charge.
Shade with the Push of a Button
Retract or extend this pontoon bimini top with the push of a button. The sealed receiver can be conveniently mounted to the boat deck floor, underneath the helm station. The concealment for the receiver wires fits any pontoon rail profile. You are in control should you need additional coverage, protecting you and your passengers against the elements, whether it be harsh UV rays or rain. Shade is yours with the SureShade battery-powered bimini!
|
1480.26 |
|
|
Upload/Download Cable for NavNet to PC, 5 Meters
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.46 |
|
|
Oberdorfer 5091 Carbon Bearing
|
38.66 |
|
|
230V AC Main + Branch A-Series Toggle Circuit Breaker Panel
PN: 8509
White Switches
(1) 16A Double Pole Circuit Breaker Installed
(3) 8A Single Pole Circuit Breakers Installed
(1) 8246 AC Analog Micro Ammeter
(1) 8245 AC Analog Micro Voltmeter
Features:
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Maximum panel amperage - 50 Amperes
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Industry standard height and width
Countersunk mounting holes throughout
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Labels
Over 500 individual Labels available
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
378.94 |
|
|
Airmar 509LHW 3kW 28 to 60kHz & 150 to 250kHz Thru-Hull Transducer
This all-in-one transducer for popular fishing frequencies (28, 38, 50 and 200) is our best performing, highest power, 2 to 3 kW transducer.
It has a depth of 10,000 feet; an operating frequency of 28 to 60 kHz and 150 to 250 kHz; a beamwidth of 5x9 to 11x23 degrees or a constant 25 degrees; and a 0 to 25 degree deadrise.
This transducer has a narrow beam low frequencies for deep water performance and high wide frequencies for shallow water performance.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3431.99 |
|
|
xSonic R509LH-W Thru-Hull Wide-Beam CHIRP w/Fairing Block
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & fast response water-temperature sensor
CHIRPs across the following bandwidths:
Low Frequency 28 to 60 kHz
High Frequency 150 to 250 kHz
25 internal Broadband Ceramics
Epoxy housing with stuffing tube and high-performace fairing
Boat size: 12M (40’)
Hull Type — Fiberglass, Wood, Metal
Can retrofit to existing R209 install
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: 0° to 25°
Acoustic Window: Epoxy/urethane
Weight: 20.8kg (46lb)
|
4456.65 |
|
|
R509C-LH CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4150.31 |
|
|
R509C-LHW CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4334.37 |
|
|
R509C-LM CHIRP 3KW Transducer
Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer.
Features:
Depth & fast-response water-temperature sensor
Epoxy transducer housing with high-performance fairing
For use on hulls up to 25° deadrise
82 kHz of total bandwidth from one transducer
Benefits of Thru-Hull Transducers with High-Performance Fairing:
The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull)
The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH)
When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface
Specifications:
Boat Size: 12 m (40 ft.) and above
Hull Type: Fiberglass, wood, or metal
Engine Type: Inboard, outboard or I/O
Low (28 kHz to 60 kHz):
23° to 9° port/starboard
11° to 5° fore-aft beamwidth
Maximum depth 10000 ft
Medium (80 kHz to 130 kHz):
13° to 8° beamwidth
Maximum depth 3000 ft.
Bottom Coverage Relative to Frequency and Depth
Depth (50 ft.): 10 ft.
Depth (100 ft.): 24 ft.
Depth (300 ft.): 68 ft.
Depth (600 ft.): 136 ft.
Depth (1000 ft.): 228 ft.
Depth (1500 ft.): 340 ft.
Depth (2000 ft.): 456 ft.
Depth (2500 ft.): 570 ft.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4453.13 |
|
|
Dock Edge "C" Guard Economy PVC Profiles 10ft. Roll - White
This economy "C" Shape co-extruded Profile is made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. It will not crack or distort with temperature extremes. It comes in easy to install 10 Ft. coil. It can be used on flat surfaces as well as on pilings.
Product Specifications:
Part No.: 1132-F
Description: "C" Guard Profile, (10 Ft/Roll), White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
24.28 |
|