|
Little Giant Submersible Pump 503103
Little Giant 3E-12N Submersible or In-Line Pump
Motor 115 Volt 60 Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 500 GPH at 1 Foot Head, Shutoff Head 17.3 Feet, Inlet: 1/2" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord
Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications
|
332.28 |
|
|
Little Giant Submersible Pump 503375
Little Giant 3E-12N-WG Submersible or In-Line Pump
Motor 115 Volt 60Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 500 GPH at 1 Foot Head, Shutoff Head 17.3 Feet, Inlet: 1/2" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Fluid Temperature Up to 120F (49C), UL Listed, 15 Foot Power Cord, Pump Color is Black for Lower Visibility in Ponds or Fountains
503375, Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications
|
325.26 |
|
|
Little Giant 103375 Volute, 3E-12N Nylon Black
|
40.55 |
|
|
Little Giant Submersible Pump with 6' Cord
Little Giant 3E-12NR Submersible or In-Line Pump
115 Volt 60Hz 1/15 HP Permanently Lubricated Oil Filled Motor,
670 GPH at 1 Foot Head, Shutoff Head 22.6 Feet,
Inlet: 1/2" FNPT or Screened,
Outlet: 1/2" MNPT and 3/4" Tubing,
Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal,
Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord
Item #
Model
Volts
Cord
Protection
503203
3E-12NR
115
6 ft.
Thermal overload
503203 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications.
|
372.06 |
|
|
Little Giant Submersible Pump 503216
Little Giant 3E-12NRY Submersible or In-Line Pump
Motor 230 Volt 50/60 Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 600 GPH at 1 Foot Head, Shutoff Head 21 Feet, Inlet: 1/2" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Fluid Temperature Up to 120F (49C), UR/C-CSA Listed, 12 Foot Power Cord- No Plug
503216 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications.
|
434.46 |
|
|
Little Giant Submersible Pump 503186
Little Giant 3E-12NT Submersible or In-Line Pump,
Motor 115 Volt 60 Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 500GPH at 1 Foot Head, Shutoff Head 17.3 Feet, Inlet: 1/2" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord
503186 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications.
|
341.64 |
|
|
Haight Pump 3E-001000 3E Pump Hd Hot Oil Tang Dr
Specifications
Capacity range is: Up to Capacity Max
Construction Material: Gray Iron
Capacity (max): 3 gpm
Pump Speed: 1740 RPM
E Series - Positive Displacement Pump
The E - Series positive displacement pumps are an economical, high performance modification to our D - Series models. These pumps are particularly well suited for use in direct drive, hub mounted configurations where size, weight, and cost are crucial performance criteria in an application. The rugged simplicity of the E - Series is proven thousands of times every year in high temperature applications through-out the world.
|
508.11 |
|
|
Haight Pump 3E-S23 Hot Oil Pump & Motor
Features :
Pump Body: Cast Iron
Shaft Seal: Viton Mechanical Seal
Motor Specs : 1/3 Horsepower, 1800 RPM, 115/230 Volts, Single Phase
Haight 3E-S23A is a Hot Oil Pump and Motor assembly with Cast Iron Construction, Viton Mechanical Seal, close coupled to a 1/3 HP, 1800 RPM, 115/230 Volt Motor. These pumps are particularly well suited for use in direct drive, hub mounted configurations where size, weight, and cost are crucial performance criteria in an application. The rugged simplicity of these pumps has been proven thousands of times every year in high temperature applications through-out the world. Since 1972, Haight Pump has earned a well deserved reputation for their expertise in the hot oil pump market. With over thirty years experience supplying equipment that meets the design and performance criteria for an astounding variety of customers, these pumps can help you meet your performance goals. Haights versatility, durable construction, and competitive price has proven a winning combination in hundreds of thousands of commercial kitchens, stores and factories throughout the world.
|
1039.85 |
|
|
Little Giant Submersible Pump 503003
Little Giant 3E-12R Submersible or In-Line Pump
Motor 115 Volt 60 Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 525 GPH at 1 Foot Head, Shutoff Head 25.9 Feet, Inlet: 1/2" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord
503003 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
|
370.50 |
|
|
Little Giant Submersible Pump 503603
Little Giant 3E-34N Submersible or In-Line Pump
Motor 115 Volt 60Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 670 GPH at 1 Foot Head, Shutoff Head 20.3 Feet, Inlet: 3/4" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord
503603 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated
|
334.62 |
|
|
Oberdorfer 405M-4-12N18Bct Pump 1Hp 1800Rpm 12V
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 1HP 12V 1800RPM TEFC Motor
|
1893.53 |
|
|
Upload/Download Cable for NavNet to PC, 5 Meters
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.46 |
|
|
Dock Edge "C" Guard Economy PVC Profiles 10ft. Roll - White
This economy "C" Shape co-extruded Profile is made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. It will not crack or distort with temperature extremes. It comes in easy to install 10 Ft. coil. It can be used on flat surfaces as well as on pilings.
Product Specifications:
Part No.: 1132-F
Description: "C" Guard Profile, (10 Ft/Roll), White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
24.28 |
|
|
Venus GX Control - No Display
Features:
Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.
VRM Online Portal All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.
Remote Console on VRM The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.
Automatic genset start/stop A highly customizable start/stop system. Use state of charge, voltage, load and other parameters. Define a special set of rules for quiet times, and optionally a monthly test run.
Data logging When connected to the internet, all data is sent to the VRM Portal. When there is no internet connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or offline converted with the VictronConnect app, for analysis.
Supported products - Multis and Quattros, including split-phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing configuration is possible (only remotely via the internet, not without an internet connection). - EasySolar 1600VA - BlueSolar MPPT Solar Chargers with a VE.Direct port. - BlueSolar MPPT 150/70 and the MPPT 150/85 with VE.Can port. - SmartSolar MPPT 150/70 and the MPPT 150/100 with VE.Can port. When multiple BlueSolar MPPTs or SmartSolar MPPTs with VE.Can are used in parallel, all the information is combined as one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers. - BMV-700 family can be connected directly to the VE.Direct ports on the Venus GX. Use the VE.Direct Cable for this. - BMV-600 family can be connected to the VE.Direct ports on the Venus GX. Requires an accessory cable. - Lynx Ion + Shunt - Lynx Ion BMS - Lynx Shunt VE.Can - Skylla-i battery chargers - NMEA2000 tank sensors - A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position. - Fronius PV Inverters When more than two VE.Direct products must be connected, USB can be used.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
327.42 |
|
|
There are plenty of benefits that come with starting a business, including having more flexibility and freedom with your schedule. For many individuals, however, the process of becoming an entrepreneur is a bit intimidating because it comes with so many questions.
The good news is, there are several opportunities and resources available for veterans these days that can make the path a little easier to travel. Start by reaching out to local businesses that are veteran-owned so you can network; forging a connection with a company like CLR Marine will give you some support as you start your journey. Then, think about how you can protect your business and grow your ideas at the same time.
Start with a sustainable idea
There are tons of business ideas out there, but only one will be perfect for you and your specific needs and skills. If you have the time and patience, you can build a company from the ground up based on something you enjoy doing, such as woodworking or baking. However, you might consider looking into a franchise, which includes benefits such as built-in branding that already has a customer following and a handbook for daily business operations. This is a great way to ease into the business world because it takes some of the pressure off your shoulders.
Look for funding
Once you have an idea of what sort of business you want to start, it’s time to look for funding. There are several resources available for veterans, but there may only be a few that are right for you. Decide whether you want to look for a loan or a grant, then do some research on which ones you qualify for. Keep in mind that some grants may depend upon the size of your business and whether you plan to have employees, while others factor in your years of service or whether you are living with a disability. It’s also important to note that there are many other resources available to help you cut down on costs and save money throughout the year.
Get some benefits
One resource available to all business owners is the formation of an LLC, or Limited Liability Company. This is a great way to add some protection to your company as well as some tax benefits, as Florida LLC owners aren’t required to pay state taxes on their business income. There are some other tax requirements, however, so it’s essential to find out the rules and regulations that are specific to the state of Florida. Read over the specific steps and guidelines for forming an LLC, and consider using a formation service that can help you get through the process with no issues.
It’s important to stay organized during this process, so create an area to safely file paperwork related to your business. Keep it separate from your personal files so there will be no confusion come tax-time.
Expand your education
One final consideration to make when you’re ready to start a business is how to expand upon your education. As a veteran, you already have an advantage in the business world due to your leadership skills and the ability to adapt to change, so now might be the time to focus on learning more about building a successful website or how to create a marketing plan. There are plenty of free educational opportunities for veterans online, including business classes and workshops, but you can also connect with other small business owners to learn how they’ve handled getting set up. Look for networking opportunities on social media and research more about how to create targeted ads on platforms like Facebook and Instagram to reach more customers.
Starting a business can be stressful, but you can minimize frustration by giving yourself plenty of time to set things up. By getting all your ducks in a row and staying organized, you can bring your business plan to fruition.
Ready to get in touch with CLR Marine? Fill out the contact us form or call 877-275-2576.
Kelli Brewer
DeployCare.org
Photo via Pexels
|
|