Universal Ladder Rack Tie-Down System - 2" Retractable Tie-Down - 1 Pair Ladder rack users can permanently mount the CargoBuckle Ladder Rack Tie-Down System to their truck racks. Valuable equipment is held securely with 7 feet of professional-quality 2′′ web and a strong double J-hook. The strap automatically retracts out of your way when not in use. The Ladder Rack Tie-Down System includes the CargoBuckle Retractable Ratcheting Tie-Down, the ladder rack universal mount adapter, and mounting hardware. Features: Complete ladder rack tie-down system for trucks with universal bracket for permanent mounting on square or round racks 7 feet of professional quality webbing and a strong double J-hook to secure your load Ideal for securing and towing a wide variety of gear — from powersports and automotive to hardware and building materials Systems are available to accommodate square racks and round ladder racks with the universal mount Universal mount for both Square or Round rack systems 2″ Break Strength – 2000 lbs. each 2″ Safe Working Load – 677 lbs. each Includes: Two retractable ratcheting tie-downs  Universal ladder rack adapter mount and mounting hardware Specifications: Weight: 5 kg Size: 2 in. Package Size: Includes two tie-downs

NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint! As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power. The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power. Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to! This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels. Order the NXL-M4 for insane power out on the water! Features: Hardware resistant to corrosion and UV Protection Coated 4 Layers PCB to prevent corrosion IPX5 Water Resistance Grade High Level Input For Radio Use Front cover to keep the controls safe to the elements LED Clip Indicator to easier adjustment Stable and Reliable Class D Circuit Design Sound Quality Verification Using AP Instruments Direct Insert Power and Speaker Terminals Short Circuit, Thermal, and Voltage Protection Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz  2 Ohm RMS Power Per Channel - 4 x 230W  4 Ohm RMS Power Per Channel - 4 x 150W  4 Ohm RMS Power Bridge Channel - 2 x 440W  Signal-to-Noise Ratio - >90dB  Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7" *Sold as an Individual

15' Tie Down Straps with Cover The YakGear Tie Down Straps make boat transportation simple. Featuring a cam buckle on one end, the 15-foot strap is made up of heavy-duty 1-inch nylon webbing. In addition to providing a strong and durable strap that is easy to use, the YakGear tie-down Down Straps are constructed with a protection case to protect the boat and vehicle while in transport. This tie-down strap kit includes two tie-down straps. Features: Sold as a pair  15 foot tie down straps Includes padded cover for vehicle protection 1-year warranty

BoatBuckle® G2 Retractable Bow Tie-Down Quantity: 1 Dimensions: 2"-43" Break Strength: 2,500 lbs. Safe Work Load: 833 lbs Introducing another industry first... the BoatBuckle® G2 Bow Tie-Down, the only automatically retractable ratcheting tie-down in its category! This system was designed with three-point trailer tie-down safety in mind and should always be used in conjunction with a good winch strap,along with a transom or gunwale tie-down.

BoatBuckle® G2 Retractable Bow Tie-Down Stainless Steel Quantity: 1 Dimensions: 2"-43"" Break Strength: 1,500 lbs. Safe Work Load: 500 lbs Introducing another industry first... the BoatBuckle® G2 Bow Tie-Down, the only automatically retractable ratcheting tie-down in its category! This system was designed with three-point trailer tie-down safety in mind and should always be used in conjunction with a good winch strap, along with a transom or gunwale tie-down.

White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength of 150 lbs.

Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength of 150 lbs.

AT-3 Small White Nylon Tie Mount - Qty. 500 The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

AT-3B Small Black Nylon Wire Tie Mount - Qty. 500 The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.