|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Blue LED - White Plastic Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
30.38 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Black Plastic Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
21.26 |
|
|
Surface Strip Light w/Switch - White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Polished Stainless Steel Rim LED Courtesy Lamp - Blue
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - White Plastic Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
27.34 |
|
|
Save On Navionics+ with Select GPS Chartplotters!
Navionics cartography included (bundled) with some chartplotters is specifically designed to provide out-of-the-box usability. Several leading manufacturers now offer a Navionics+ card with select GPS plotters - at a great discount versus purchasing both separately. Currently, Navionics+ bundles are offered by Humminbird, Lowrance, Raymarine, and SI-TEX.
Humminbird
698ci HD DI KVD Nav Combo - SKU 53939
Lowrance
Elite 4 - SKU 54463
Elite 5 - SKU 52085 & 52086
Elite 7 - SKU 52089, 52090 & 52091
Elite 9 - SKU 54475, 54476 & 54477
Raymarine
Dragonfly 4 - SKU 55518, Dragonfly 5 - SKU 55522, Dragonfly 5M - SKU 55520, Dragonfly 6 - SKU 56016, Dragonfly 7 - SKU 56018
A68 - SKU 56023, A78 - SKU 56028
ES75 - SKU 57192, ES77 - SKU 57195, ES78 - SKU 57198
ES97 - SKU 57208, ES98 - SKU 57209
ES127 - SKU 57210, ES128 - SKU 57211
E7 - SKU 56057, E7D - SKU 56058
SI-TEX
SVS 460C - SKU 54169, SVS 460CE - SKU 56194
SVS 880C - SKU 56195, SVS 880CE - SKU 56196
SVS 1010C - SKU 56197, SVS 1010CE - SKU 56198
SVS 560CF - SKU 56187, SVS 560CF E - SKU 56188
SVS 880CF - SKU 56190, SVS 880CF E - SKU 56191
SVS 1010CF - SKU 56192, SVS 1010CF E - SKU 56193
Raymarine Dragonfly PRO models enable Navionics SonarChart™ Live, a new personal HD bathymetry map that displays in real time on the Navionics Boating app, when connected via Wi-Fi to your mobile device. Other plotters, sounders and fishfinders can create SonarChart™ Live when connected using a compatible Wi-Fi router, such as GoFree WIFI-1 Module by Navico or Sonar Server by Digital Yacht.
Closeouts Rebates Remanufactured Specials
|
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Warm White LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Blue LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
31.90 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Stainless Steel Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
28.86 |
|
|
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - White Plastic Bezel - 12V
Attractive, energy efficient lighting for interior and exterior use.
Hella Marine round LED courtesy lamps can be installed almost anywhere on board.
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
|
21.26 |
|
|
Surface Strip Light w/Switch - White LED - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
62.28 |
|
|
LED Surface Strip Light - White LED - 24V - No Switch
The Surface Mount Strip lamps from Hella marine are completely sealed, UV and corrosion resistant with an ultra-low profile meaning these lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature:5000K (White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming" Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
48.61 |
|
|
Surface Strip Light w/Switch - White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
68.35 |
|
|
Surface Strip Light w/Switch - Warm White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|