|
Use where bends or long lengths are required, such as engine intake, wet exhaust connections, bilge pump intake/discharge, scupper lines, toilet intake/discharge, holding tank vent or pumpout. Black synthetic rubber tube and cover. Reinforced with wire helix imbedded within plies of HD synthetic cord. Resistant to exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant, odor permeation resistant. Temperature range -20° to +200°F continuous, +250° intermittent. Meets SAE J2006 Type R2 and double ozone resistance requirements.
|
129.99 |
|
|
Heavy Wall Heat Shrink Tubing - 1" x 12" - 2-Pack - Black
Package of 2 Black 12"(30.5cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.33 |
|
|
Heavy Wall Heat Shrink Tubing - 1" x 12" - 2-Pack - Red
Package of 2 Red 12"(30.5cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.33 |
|
|
BS-8 Stainless Steel Basket - 3.1" x 12.4"
GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.
Fits:
ARG-2000
SA-2000
|
68.66 |
|
|
Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4
|
1758.24 |
|
|
Ratchet Strap Tie-Down w/Double J-Hooks & Keeper - 1" x 12'
The 1” ratchet tie-down features durable, nylon webbing with solid, double J-hooks and convenient keeper
Break Strength 1,000lbs
SWL 333lbs
|
19.86 |
|
|
Use where bends or long lengths are required, such as engine intake, wet exhaust connections, bilge pump intake/discharge, scupper lines, toilet intake/discharge, holding tank vent or pumpout. Black synthetic rubber tube and cover. Reinforced with wire helix imbedded within plies of HD synthetic cord. Resistant to exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant, odor permeation resistant. Temperature range -20° to +200°F continuous, +250° intermittent. Meets SAE J2006 Type R2 and double ozone resistance requirements.
|
139.99 |
|
|
BP-8 Poly Basket - 3.1 x 12.4"
Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.
Fits:
ARG-2000
SA-2000
|
64.00 |
|
|
BM-8 Monel Basket - 3.1" x 12.4"
Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.
Fits:
ARG-2000
SA-2000
|
216.00 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - Black
Package of 3 Black 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.59 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - Red
Package of 3 Red 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.51 |
|
|
Battery Cable Adhesive Lined Heavy Wall Battery Cable Tubing (BCT) - 1" x 12" - Yellow - 2 Pieces
Features:
3:1 ratio
Shrinks at 257°F/125°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.97 |
|
|
Heat Shrink Tubing 1" x 12" - Yellow - 3 Pieces
Heat activated adhesive lining creates a superior water, oil, and acid resistant seal. Most shrink tubing on the market reduces to a 2:1 ratio, Ancor tubing shrinks to 3:1 which allows a wider range of applications for each tubing size.
Features:
Diameter: 1"
Shrinks To: 1/4"
Color: Yellow
Per Package: 3
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.03 |
|
|
Heavy Wall Heat Shrink Tubing - 1" x 6" - 2-Pack - Red
Package of 2 Red 6"(15.2cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.91 |
|
|
2-5/16" Trailer Ball - 1" x 2-1/8" Shank - 7,500 lb. Capacity - Chrome
Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)
This 2-5/16" trailer ball features a ball capacity of 7,500 lbs. It features a 1" shank diameter, a 2-1/8" shank length, 0" of rise, and a nickel-chrome finish to protect against the elements. To give you the power you need to tow with confidence, CURT 2-5/16" trailer hitch balls are thoroughly tested for safety and meet U.S. VESC specifications.
Features:
Fits 2-5/16" couplers and accepts up to 7,500 lbs. GTW
Constructed from high-strength, hot-forged steel
Protected by a durable chrome-plated finish
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 7,500 lbs
Ball Diameter: 2-5/16 in.
Color: Silver
Finish: Chrome-plated
Hub Warehouse: D25
Material: Forged steel
Shank Diameter: 1 in.
Shank Length: 2-1/8 in.
Shank Rise: 0 in.
Torque: 250 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
18.22 |
|