|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Yamaha Fuel Line Kit 6' x 3/8"
Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
Features:
Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade
Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks
Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.14 |
|
|
Fuel/Water Separator
Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.
Features:
Double seal for enhanced performance
Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872
|
12.74 |
|
|
Universal Fuel/Water Separator Kit with Bracket
Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.
Features:
10 Micron Filter and bracket included
Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports
Double seal for enhanced performance
Replaces Mercury 35-60494A4
|
41.88 |
|
|
PleasureCraft Marine RP061022 Impeller for Raw Water Pump
Impeller for 2003 and newer PCM engines using Serpentine belt and PCM water pump
Not for v-belt systems!
Fits Crusader and Pleasurecraft Marine PCM 5.0 , 5.7, 6.0 & 8.1 models with serpentine belt driven water pumps.
Will not for V-belt systems.
Replaces : Crusader and Pleasurecraft R061022 , RP061022 , Sierra 18-8926 , Mallory 9-45718
|
57.47 |
|
|
Quiet Flush Raw Water Toilet - Compact Bowl - 12V
Based on our proven Electric Toilet, the Quiet Flush is designed to radically reduce noise levels, making life more comfortable for everyone onboard — even those sleeping. It‘s available in two versions: one that connects to a vessel‘s existing pressurized water system, or one with a remote mounted pump to use sea, river or lake water to flush.
Features:
Models designed for boats with onboard pressurized water systems capable of delivering 2.9 GPM (11 LPM) or more have a solenoid valve assembly that includes an anti-siphon breaker to ensure no backflow from the toilet into the water system
Models designed for boats without adequate pressurized water systems feature a remote mounted, selfpriming rinse pump that brings in sea, river or lake water for flushing, and includes a pump guard strainer
A powerful macerating discharge pump breaks up waste while evacuating the toilet
A control panel allows three different water levels for flush and drain cycles
Regular and compact size bowls are available
Can be mounted 3' (1m) above or below the waterline with appropriate plumbing
Compact Bowl Size
Wood - Standard Close Lid
Raw Water
Remote Rinse Pump
|
723.92 |
|
|
Quiet Flush Raw Water Toilet - Compact Bowl - 24V
Based on our proven Electric Toilet, the Quiet Flush is designed to radically reduce noise levels, making life more comfortable for everyone onboard — even those sleeping. It‘s available in two versions: one that connects to a vessel‘s existing pressurized water system, or one with a remote mounted pump to use sea, river or lake water to flush.
Features:
Models designed for boats with onboard pressurized water systems capable of delivering 2.9 GPM (11 LPM) or more have a solenoid valve assembly that includes an anti-siphon breaker to ensure no backflow from the toilet into the water system
Models designed for boats without adequate pressurized water systems feature a remote mounted, selfpriming rinse pump that brings in sea, river or lake water for flushing, and includes a pump guard strainer
A powerful macerating discharge pump breaks up waste while evacuating the toilet
A control panel allows three different water levels for flush and drain cycles
Regular and compact size bowls are available
Can be mounted 3' (1m) above or below the waterline with appropriate plumbing
Compact Bowl Size
Wood - Standard Close Lid
Raw Water
Remote Rinse Pump
|
723.92 |
|
|
Quiet Flush Raw Water Toilet - Regular Bowl - 12V
Based on our proven Electric Toilet, the Quiet Flush is designed to radically reduce noise levels, making life more comfortable for everyone onboard — even those sleeping. It‘s available in two versions: one that connects to a vessel‘s existing pressurized water system, or one with a remote mounted pump to use sea, river or lake water to flush.
Features:
Models designed for boats with onboard pressurized water systems capable of delivering 2.9 GPM (11 LPM) or more have a solenoid valve assembly that includes an anti-siphon breaker to ensure no backflow from the toilet into the water system
Models designed for boats without adequate pressurized water systems feature a remote mounted, selfpriming rinse pump that brings in sea, river or lake water for flushing, and includes a pump guard strainer
A powerful macerating discharge pump breaks up waste while evacuating the toilet
A control panel allows three different water levels for flush and drain cycles
Regular and compact size bowls are available
Can be mounted 3' (1m) above or below the waterline with appropriate plumbing
Regular Bowl Size
Wood - Standard Close Lid
Raw Water
Remote Rinse Pump
|
723.92 |
|
|
Quiet Flush Raw Water Toilet - Regular Bowl w/Soft Close Lid - 12V
Based on our proven Electric Toilet, the Quiet Flush is designed to radically reduce noise levels, making life more comfortable for everyone onboard — even those sleeping. It‘s available in two versions: one that connects to a vessel‘s existing pressurized water system, or one with a remote mounted pump to use sea, river or lake water to flush.
Features:
Models designed for boats with onboard pressurized water systems capable of delivering 2.9 GPM (11 LPM) or more have a solenoid valve assembly that includes an anti-siphon breaker to ensure no backflow from the toilet into the water system
Models designed for boats without adequate pressurized water systems feature a remote mounted, selfpriming rinse pump that brings in sea, river or lake water for flushing, and includes a pump guard strainer
A powerful macerating discharge pump breaks up waste while evacuating the toilet
A control panel allows three different water levels for flush and drain cycles
Regular and compact size bowls are available
Can be mounted 3' (1m) above or below the waterline with appropriate plumbing
Regular Bowl Size
Composite - Soft Close Lid
Raw Water
Remote Rinse Pump
|
735.28 |
|
|
Quiet Flush Raw Water Toilet - Regular Bowl - 24V
Based on our proven Electric Toilet, the Quiet Flush is designed to radically reduce noise levels, making life more comfortable for everyone onboard — even those sleeping. It‘s available in two versions: one that connects to a vessel‘s existing pressurized water system, or one with a remote mounted pump to use sea, river or lake water to flush.
Features:
Models designed for boats with onboard pressurized water systems capable of delivering 2.9 GPM (11 LPM) or more have a solenoid valve assembly that includes an anti-siphon breaker to ensure no backflow from the toilet into the water system
Models designed for boats without adequate pressurized water systems feature a remote mounted, selfpriming rinse pump that brings in sea, river or lake water for flushing, and includes a pump guard strainer
A powerful macerating discharge pump breaks up waste while evacuating the toilet
A control panel allows three different water levels for flush and drain cycles
Regular and compact size bowls are available
Can be mounted 3' (1m) above or below the waterline with appropriate plumbing
Regular Bowl Size
Wood - Standard Close Lid
Raw Water
Remote Rinse Pump
|
723.92 |
|
|
Quiet Flush Raw Water Toilet - Regular Bowl w/Soft Close Lid - 24V
Based on our proven Electric Toilet, the Quiet Flush is designed to radically reduce noise levels, making life more comfortable for everyone onboard — even those sleeping. It‘s available in two versions: one that connects to a vessel‘s existing pressurized water system, or one with a remote mounted pump to use sea, river or lake water to flush.
Features:
Models designed for boats with onboard pressurized water systems capable of delivering 2.9 GPM (11 LPM) or more have a solenoid valve assembly that includes an anti-siphon breaker to ensure no backflow from the toilet into the water system
Models designed for boats without adequate pressurized water systems feature a remote mounted, selfpriming rinse pump that brings in sea, river or lake water for flushing, and includes a pump guard strainer
A powerful macerating discharge pump breaks up waste while evacuating the toilet
A control panel allows three different water levels for flush and drain cycles
Regular and compact size bowls are available
Can be mounted 3' (1m) above or below the waterline with appropriate plumbing
Regular Bowl Size
Composite - Soft Close Lid
Raw Water
Remote Rinse Pump
|
735.28 |
|
|
Spun Silver Box Set of 6 Gauges f/ Inboard Engines - Speed, Tach, Voltmeter, Fuel Level, Water Temperature & Oil
Packaged and ready for the display counter. This 6 gauge boxed set offers a complete set of gauges ready to install.
Boxed Set Includes:
Tachometer (0 to 6000 RPM)
Speedometer (0 to 55 MPH)
Fuel Level (E to F)
Voltmeter (10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 30 PSI)
Factory P/N KTF0184
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
266.64 |
|
|
Euro Black 4" Multifunction Gauge - Volt/Fuel/Oil/Water Temperature
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Multi-Function Gauge Displays:
Fuel (E to F)
Volts (10 to 18 AMPS)
Oil Pressure (0 to 80 PSI)
Water Temp. (120 to 220° F)
4" Gauge - Hole size: 3.4" (86.36 mm)
Features:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GF0001
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
103.12 |
|
|
Quiet Flush E2 Fresh Water Toilet Regular Bowl - 12V - Soft Close Lid
From crowded charter boats to racing yachts and everything in between, the award-winning Jabsco Quiet Flush E2 marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its simplified installation, ease of serviceability, and sleek touch sensor control, the Quiet Flush E2 brings a whole new level of convenience and comfort to the water.
Easy 2 Install
The Quiet Flush E2 gives even the occasional boater the confidence to install this toilet. For maximum flexibility in tight spaces, the base can be rotated, allowing you to install the pump with the discharge to the left, right, or rear.
Easy 2 Service
Designed for recreational craft but built to withstand the abuse of commercial use, the quick-release system provides easy access to the macerator pump and discharge hose with no tools needed.
Easy 2 Operate
Marine toilets bring the comfort of home with you, but there are additional considerations on a boat, which is why the Quiet Flush E2 puts you in complete control. With its sleek touch sensor panel, you can choose three settings — including a water-saving, eco-flush cycle.
Installation:
Base can be rotated to the left, right, or rear of the bowl to suit multiple installation options
Discharge pump can be rotated 180° to suit the base orientation and ensure pipework is routed to the rear of the toilet
Straight or 90° discharge port for easy install
Quick Release for Easy Servicing:
Quick release system allows for fast and easy removal of discharge pump and hose when servicing is necessary
C-Clip design releases the pump assembly from the toilet base without the need for tools, resulting in fast service time
Multi-Function Touch Panel:
Stylish low-profile design
Touch-sensitive operation
Eco flush, full flush, or empty functions
Only 1-litre (1-quart) per flush using eco mode
Designed for wet room installations
No spill ‘empty’ feature to leave bowl dry when the boat is in motion
Specifications:
Bowl Size: Regular
Seat & Lid: Composite
Slow-Close Lid: Yes
Water: On-board fresh water
Device: Solenoid valve
Flush Control Switch: Touch Panel
Voltage DC: 12
Recommended Fuse Size: 25 amp
Dimensions:
Height: 14.4 in. (365 mm)
Width: 14.8 in. (375 mm)
Depth: 18.9 in. (480 mm)
Weight: 38.6 lbs (17.5 kg)
|
835.06 |
|
|
Quiet Flush E2 Fresh Water Toilet Regular Bowl - 24V - Soft Close Lid
From crowded charter boats to racing yachts and everything in between, the award-winning Jabsco Quiet Flush E2 marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its simplified installation, ease of serviceability, and sleek touch sensor control, the Quiet Flush E2 brings a whole new level of convenience and comfort to the water.
Easy 2 Install
The Quiet Flush E2 gives even the occasional boater the confidence to install this toilet. For maximum flexibility in tight spaces, the base can be rotated, allowing you to install the pump with the discharge to the left, right, or rear.
Easy 2 Service
Designed for recreational craft but built to withstand the abuse of commercial use, the quick-release system provides easy access to the macerator pump and discharge hose with no tools needed.
Easy 2 Operate
Marine toilets bring the comfort of home with you, but there are additional considerations on a boat, which is why the Quiet Flush E2 puts you in complete control. With its sleek touch sensor panel, you can choose three settings — including a water-saving, eco-flush cycle.
Installation:
Base can be rotated to the left, right, or rear of the bowl to suit multiple installation options
Discharge pump can be rotated 180° to suit the base orientation and ensure pipework is routed to the rear of the toilet
Straight or 90° discharge port for easy install
Quick Release for Easy Servicing:
Quick release system allows for fast and easy removal of discharge pump and hose when servicing is necessary
C-Clip design releases the pump assembly from the toilet base without the need for tools, resulting in fast service time
Multi-Function Touch Panel:
Stylish low-profile design
Touch-sensitive operation
Eco flush, full flush, or empty functions
Only 1-litre (1-quart) per flush using eco mode
Designed for wet room installations
No spill ‘empty’ feature to leave bowl dry when boat is in motion
Specifications:
Bowl Size: Regular
Seat & Lid: Composite
Slow-Close Lid: Yes
Water: On-board fresh water
Device: Solenoid valve
Flush Control Switch: Touch Panel
Voltage DC: 24
Recommended Fuse Size: 15 amp
Dimensions:
Height: 14.4 in. (365 mm)
Width: 14.8 in. (375 mm)
Depth: 18.9 in. (480 mm)
Weight: 38.6 lbs (17.5 kg)
|
835.06 |
|