Wire Block - Ferrule Top w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave Diamter Wire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire termination Features: Flared cheeks to minimise chafing Removable sheaves Applications: Wire blocks suit halyards, vang and backstay applications Materials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications: Sheave Ø: 45mm(1-3/4") Max. Cable Ø: 6mm(1/4") M.W.L:850kg(1,870lbs) B.L.: 1,700kg(3,740lbs) Weight: 80kg(2.8oz)

Wire Block - Tubular Rivet Head w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire termination Features: Flared cheeks to minimise chafing Removable sheaves Applications: Wire blocks suit halyards, vang and backstay applications Materials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications: Sheave Ø: 45mm(1-3/4") Max. Cable Ø: 6mm(1/4") M.W.L:850kg(1,870lbs) B.L.: 1,700kg(3,740lbs) Weight: 88kg(3.1oz)

Wire Block w/Removable Clevis Pin Head - Nylatron® Sheave - 25mm(1") Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves. Features: Removable clevis pin head Applications: Wire blocks suit halyards, vang and backstay applications Materials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications: Sheave Ø: 25mm(1") Max. Cable Ø: 3mm(1/8") M.W.L:450kg(990lbs) B.L.: 900kg(1,980lbs) Weight: 40kg(1.4oz)

Wire Block - Tubular Rivet Head w/Nylatron® Sheave - 25mm Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves. Applications: Wire blocks suit halyards, vang and backstay applications Materials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications: Sheave Ø: 25mm(1") Max. Cable Ø: 3mm(1/8") M.W.L:450kg(990lbs) B.L.: 900kg(1,980lbs) Weight: 40kg(1.4oz)

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose Black Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

POD I Universal No-Drill™ Vehicle Mount with 24" Rigid Aluminum Rod & 1.5" Diameter Ball Round Adapter Base The RAM POD I, universal no-drill™, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely. Features: Installation Instructions: At right angles to the base of the flexible 24" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag

Series 45 Core Block™ - Single - Swivel Shackle Head Core Blocks™ are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Universal Bearing Dynamic and high static load performance The Ronstan Universal Bearing incorporates our proven 2-stage bearing system Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction. Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance. Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn't perfect. Particularly important for cheek blocks. Alloy Cheek Plates Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimisation and the cut-away design minimises weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimising rope wear. Features: High dynamic and static load capacity Efficient 2-stage bearing system Ball bearings to counteract side thrust loads Class leading performance and sleek, contemporary styling Durable aluminium alloy cheek plates Central hub hole can be used as a becket take-off or tie-up point Applications: Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 10M (33') Various control line applications on larger yachts Alloy sheave models are available for use with wire Materials: Sheave: U.V. stabilized Acetal Cheek body: Aluminium Alloy Ball Bearings: High compression strength carbon black Acetal Shackle, head post & hub: Grade 316 stainless steel Specifications: Sheave Ø: 45mm(1-3/4") Max. Rope Ø: 12mm(1/2") Pin Ø: 5mm(3/16") M.W.L.: 700kg(1,540lbs) B. L.: 1,400kg(3,090lbs) Weight: 104g(3.6oz)

Series 20 Ball Bearing Block - Loop Top Linked Features: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction. Applications: Dinghy control lines Dinghy vangs Cunninghams Traveller controls Dinghy barber haulers Spinnaker pole launching systems Materials: Stainless Steel ball bearings UV stabilized Acetal sheave Grade 316 Stainless Steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks

ST CLB Circuit Breaker Block - 6 Position w/Negative Bus Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover Specifications: Circuits: 6 Maximum Amperage: 100A (per block) 32A (per circuit) Maximum Voltage: 32V DC Mounting: #8 Screw (M4) or #8 Nut Negative Bus: Yes Source: Common SourceMinimum Operating Temperature: -10° C Maximum Operating Temperature: 60° C Mounting Centers: 5.63"(143 mm) Screw Terminal Type: #8-32 Screws with Captive Star Lock Washer Height: 6.69"(169.93 mm) Weight: 0.75lb (0.34 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST Blade Compact Fuse Blocks - 4 Circuits w/Cover Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space. Compact common source fuse block Accepts ATO® and ATC® fast acting blade fuses Single side entry wiring Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Small format standard and custom labels available Specifications Circuits:4 Maximum Amperage: 100A per block / 30A per circuit Maximum Voltage:32V DC Mounting: #8 Screw (M4) Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST Blade Compact Fuse Blocks - 8 Circuits w/Cover Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space. Compact common source fuse block Accepts ATO® and ATC® fast acting blade fuses Single side entry wiring Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Small format standard and custom labels available Specifications Circuits:8 Maximum Amperage: 100A per block / 30A per circuit Maximum Voltage:32V DC Mounting: #8 Screw (M4) Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

25mm Wire Block with Shackle - Fishing Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines. Specifications: Sheave: 25mm / 1in. Weight: 28g / 1oz. Shackle pin: 5mm / 3/16in, Maximum wire: 2mm / 3/32in. Maximum line: 4mm / 5/32in. Maximum working load: 454kg / 1000lb Breaking load: 907kg/ 2000 lb

25mm Wire Block with Shackle Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications: Sheave: 25mm / 1in. Weight: 28g / 1oz. Shackle pin: 5mm / 3/16in, Maximum wire: 2mm / 3/32in. Maximum line: 4mm / 5/32in. Maximum working load: 454kg / 1000lb Breaking load: 907kg/ 2000 lb

45mm Single Element Block with Swivel Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks. Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life. Specifications: Sheave: 45mm / 1-3/4in Length: 102mm / 4in Weight: 103g / 3.6oz Shackle pin: 6mm / 1/4in Maximum line: 12mm / 1/2in Maximum working load: 700kg / 1543lb Breaking load: 1400kg / 3086lb