Sail Slide - Internal Track - 22mm(7/8") Wide x 42mm(1-21/32") Long Impact Resistant, U.V. Stabilized Nylon White

Sail Slide - Internal Track - 16mm(5/8") Wide x 32mm(1-1/4") Long Impact Resistant, U.V. Stabilized Nylon White

Swivel Shackle - 1/4" Pin - 1-21/32"L x 19/32"W Features: Coined head pin 6.4mm(1/4") Diameter Pin Grade 316 Stainless Steel bodies and pins

Standard Dee Slotted Pin Shackle - 1/4" Pin - 7/8"L x 9/16"W Features: Slotted shackle pins are low profile to prevent snagging on ropes etc... Grade 316 Stainless Steel bodies and pins

Twisted Shackle - 5/16" Pin - 1-7/8"L x 5/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head

Yamada 643005 O'Ring 7.8 mm X 1.9 mm

Stainless Steel Welded Pad Eye - 1-7/8"L x 5/8"W Specifications: Eye Width 3/8" (10 mm) Eye Height 3/8" (10 mm) Eye Stock 3/16" (5 mm) Length 1-7/8" (48 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-5/16" (33 mm) SWL 250 lbs (115 kg) Weight .5 oz. (14 g)

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - Square Zinc-plated u-bolt for mounting brackets & accessories to trailer frames. Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 4" L *Comes packaged with nuts and washers.

Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - Square Zinc-plated u-bolt for mounting brackets & accessories to trailer frames. Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 3" L *Comes packaged with nuts and washers.

Horn Cleat - Nylon - 98mm(3-7/8") Long Features: Rope Ø: 5mm(3/16") U.V. Satbilized Nylon

Nylatron Sheave Box - Single Upright Lead Block Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers.When mounted in an inverted position, are frequently used as upright leads. Features: The external tabs can be formed to fit the spar profile before fastening Applications: Typically used in dinghy spars for control lines such as outhauls Materials: Nylatron® sheave Grade 316 stainless steel load housing Specifications: Sheave Ø: 22mm(7/8") Max. Rope Ø: 3mm(1/8") Max. Cable Ø: 3mm(1/8") Fastener Ø: 5mm(3/16") M.W.L.: 160kg(350lbs) B. L.: 350kg(700lbs) Weight: 30g(1.1oz)

Channel Style Stay Adjuster - 6-7/8" (174mm) Long Applications: Typically used on dinghies, catamarans and small keelboats Materials: Grade 316 Stainless Steel Specifications: Pin Ø: 1/4" Increment Length: 1/2" Qty. Adjustment Settings: 10mm Adjust. Length: 4-1/2" Length: 6-7/8" Weight: 3.2oz

HTM-2 Fender 8.5" x 20.5" - Black with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-2 Fender 8.5" x 20.5" - Blue with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-2 Fender 8.5" x 20.5" - White with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit