|
Stainless Steel Clam Shell Vent - Large
Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).
|
39.04 |
|
|
Stainless Steel Clam Shell Vent - Small
Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).
|
37.02 |
|
|
Stainless Steel Clam Shell Vent - Mini
Mini Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).
|
25.62 |
|
|
Stainless Steel Round Louvered Vent - 4"
Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 4” 0.88 in2.
|
6.42 |
|
|
Stainless Steel Round Louvered Vent - 5"
Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.
|
9.13 |
|
|
Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4"
Specs:
Chrome Plated Brass
Dimensions Base: 4" x 3-3/4"
Width Opening: 2-1/2"
Height Opening: 1-5/8"
Screw Size: #6
|
38.30 |
|
|
Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - Straight
The Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose. Constructed of corrosion resistant investment cast 316 stainless steel.
|
25.91 |
|
|
Stainless Steel Louvered Vent - 5" x 2-5/8"
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
|
6.28 |
|
|
Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
|
16.32 |
|
|
Stainless Steel Locker Vent - 2-3/8" x 6-3/4"
Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2.
|
8.42 |
|
|
Uncut Single Instrument Pod for Triton2 - Stainless Steel Clamp
Max Useable Face: (5″ × 5″)
Max Cut Out Area: (4.38″ × 4.38″)
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamps
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with the Rail Pod is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
206.40 |
|
|
Stainless Steel Cowl Vent with Base - 3" Hose
Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3” ventilation hose. Installs with four #8 or #10 FH fasteners (not included).
|
39.04 |
|
|
Stainless Steel Midget Vent - Small
Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).
|
2.47 |
|
|
Stainless Steel Midget Vent - Medium
Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).
|
2.77 |
|
|
Stainless Steel Midget Vent - Heavy Duty
Heavy Duty Midget Vents feature a reinforced rim, making them durable enough to stand on. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).
|
8.27 |
|