8 Position Battery Terminal - POS/NEG The VBTPN is an eight-position battery terminal that can accept up to (4) 4/8/10 AWG set screw outputs and (4) 1/0 to 10  AWG ring terminal outputs.  It includes (1) positive and (1) negative bolt-on posts for retaining the factory vehicle terminal. Features: Compact design for simpler installation Solid brass construction for maximum conductivity Nickel finish  Gate Lock Technology In the Box: Positive and Negative post Adapter sleeve T20 Torx® screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 Position Battery Terminal - POS/NEG The V-BATT-TML is a four-position battery terminal that can accept up to (2) 1/0 AWG and (2) 4 AWG, down to (4) 10 AWG wires.  It includes all markers and hardware to be used for the positive or negative post.  Features: Four (4) Outputs - (2) 1/0 AWG – 10 AWG plus (2) 4 AWG – 10 AWG  Compact design for simpler installation Solid brass construction for maximum conductivity Nickel finish for durability Positive and Negative marker plates included Negative post sleeve included In the Box: Brass battery terminal Negative post sleeve (pre-installed) Black "negative" marker plate (pre-installed) Red "positive" marker plate Two 10mm hex-socket screws 2 Rubber hole-caps 4mm Allen key 1.5mm Allen key *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8264 Traditional Metal DC Panel - 24 Positions Features: All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters) All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Specifications: Positions: 24 Nominal Voltage: 12 VDC/24 VDC Maximum Amperage: 100A per bus Height: 7.50" (190.5 mm) Width: 14.75" (374.65 mm) Weight: 7.45lb. (3.38 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

V10-D108K 8 Gauge Add-A-Amp Kit for 4 Gauge Wire If you've already installed a 4 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 8 AWG wiring kit will let you add another amplifier to your system.  This water-resistant kit includes everything you need to send power to your new marine amplifier. With 8 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware, and wire ties for installation.  Does not include RCA cables or speaker wire. Features: Complete marine amplifier wiring kit Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more Marine-compliant cable In the Box: 8 AWG pearl White OFC copper wire - 10' 8 AWG matte Grey OFC copper wire - 10' 18 AWG Blue wire - 10' 2 Distribution blocks w/snap-on covers (One 4 AWG input to 8 AWG ouptut) Ten (10) 6in Wire ties Four (4) 8 AWG crimp-on spade terminals (non-insulated) One (1) 18 AWG crimp-on spade terminal (insulated) One (1) 18 AWG crimp-connector Four (4) 12 mm Phillips-head screws Two (2) Insulating boots for 8 AWG spade terminals Instruction sheet *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DT Deutsch Plug Repair Kit - 14-18 AWG (8 Position) Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications. Features: Packs include all parts needed to assemble a connector One to two extra terminals Cavity plugs to seal open circuits Applications: Wire-to-wire applications Enclosed connectors offer field-proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K EU RoHS/ELV Standard UL-94 Recognized Characteristics: Wedge locks ensure contact alignment and retention Redundant Silicone Seals Hand-insertable and removable contacts Technical Specifications: Number of Cavities: 8 Housing: Rectangular receptacle, plastic reinforced with glass fiber Contact Size: 16 (13 amp) Wire Size: 14 AWG Holds Pin/Socket: Sockets Operating Temperature: -55°C to 125°C Contents:  (1) 8 pos. plug (1) 8 pos. wedge lock (10) sockets (4) cavity plugs

DT Deutsch Receptacle Repair Kit - 14-18 AWG (8 Position) Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 18-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (18-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications. Features: Packs include all parts needed to assemble a connector One to two extra terminals Cavity plugs to seal open circuits Applications: Wire-to-wire applications Enclosed connectors offer field-proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K EU RoHS/ELV Standard UL-94 Recognized Characteristics: Wedge locks ensure contact alignment and retention Redundant Silicone Seals Hand-insertable and removable contacts Technical Specifications: Number of Cavities: 8 Housing: Rectangular receptacle, plastic reinforced with glass fiber Contact Size: 16 (13 amp) Wire Size: 14 AWG Holds Pin/Socket: Pins Operating Temperature: -55°C to 125°C Contents:  (1) 8 pos. receptacle (1) 8 pos. wedge lock (10) pins (4) cavity plugs

Lead Battery Terminal - 5/16" Stud - Negative Stud Size:5/16 " Product Features: ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned brass, providing for maximum current flow 100% tin plated brass resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Tinned Battery Terminal - 5/16" Stud - Negative Stud Size:5/16" Product Features: ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned brass, providing for maximum current flow 100% tin plated brass resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST-Blade Battery Terminal Mount Fuse Block Kit Features: Easy to install 4 ATO/ATC fused circuits Mounts on the battery terminal stud Screw terminals for securing wires Eight nylon ring terminals included Insulating cover included Kit Includes: 1 - 5023 ST-Blade Battery Terminal Mount Fuse Block Battery Terminal Mount BusBars WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Terminal Covers - Red/Back - 1/2"  These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

150 Ampere Common Busbar 20 x 8-32 Screw Terminal with Cover PN:   2312 Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs and screws allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UL 94-VO rated (self extinguishing) base material resists high heat Press on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw Continuous Amperage 130 Amperes AC 150 Amperes DC Maximum Voltage Rating 300 Volts AC 48 Volts DC Bus Material Tin-Plated Copper CDA 110/UNS11000 Base Material Glass Reinforced Polycarbonate Cover Material Polycarbonate Studs Stainless Steel, 1/4"-20, torque 72 in-lbs, accepts 1/4" (M6) ring terminal Screws Stainless steel, #8-32 screw terminal, torque 18 in-lbs, accepts #8 (M4) ring terminal Weight 0.58Lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Temperature Sensor (BTS) Designed for use with TRUECharge2 battery chargers. The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

m-Series Mini On-Off Battery Switch with Key - Black Switches a single battery to a single load group Ignition protected-safe for installation aboard gasoline powered boats. Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts. Switch Type: Single Circuit ON-OFF Color: Black Switch Positions: 2 Battery Combine: No Alternator Field Disconnect: No Maximum Voltage: 48V DC Continuous Rating : 300A Intermittent Rating : 500A (5 min) Cranking Rating 10 sec: 1500A Cranking Rating 1 min: 775A Battery Inputs: 1 Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm) Cable Size to Meet Ratings: 4/0 AWG (120mm²) Mounting Holes: Accept #10 Screw Terminal Stud Size: 3/8"-16 (M10) Terminal Stud Torque: 120 in-lb (13.56 Nm) Weight: 0.62lb (0.28/ kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

m-Series Mini Dual Circuit Battery Switch - Black Simultaneously switches two isolated battery banks. Switch Type: Dual Circuit Color: Black Switch Positions: 2 Battery Combine: No Alternator Field Disconnect: No Maximum Voltage: 32V DC Continuous Rating : 300A Intermittent Rating : 450A (5 min) Cranking Rating 10 sec: 1000A Cranking Rating 1 min: 650A Battery Inputs: 2 Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm) Cable Size to Meet Ratings: 4/0 AWG (120mm²) Mounting Holes: Accept #10 Screw Terminal Stud Size: 3/8"-16 (M10) Terminal Stud Torque: 120 in-lb (13.56 Nm) Weight: 0.80lb (0.36 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.