Bracket Mount LED Spreader Light - White Scandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment.  Features: An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most Guaranteed against corrosion, discoloration, and water intrusion Comparable to a 120-watt Halogen bulb. 12/24 volts (8-30 volts) UV-resistant Zytel® Nylon Resin housing Polycarbonate Lens IP68 *The "P" within the part number indicates retail packaging

Compact Bracket Mount LED Spreader Light - White This compact spreader light features 3 each powerful 3W LEDs, comparable to a 75W halogen bulb. Durable Zytel housing is UV resistant and is sure to withstand the elements for many seasons. A stainless steel bracket allows you to direct the light where it is most needed. Features: White housing 12/24 Volt, 5 Watt Polycarbonate Lens 610 Lumens IP67 *The "P" within the part number indicates retail packaging

High Intensity Outdoor Dimmable LED Spreader Light - White Lunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern. A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power." Features: IP67 rated 3 different mounting positions 1,100 lumens of light White

Round Surface Mount L.E.D. Dome Light w/ On/Off Switch (1356) White Powder Coat Clear Translucent Plastic Globe 12 Volt L.E.D.s Draw Less Than 10 Watts Dimmer Capable L.E.D.s Screw Size No. 8 R.H. Depth Overall 1" 3 L.E.D.s 3 watt

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

A3C Downlight Kit - Warm White with Stainless Steel, White, & Black Trim Rings Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate. Features: Warm white (includes stainless steel, white, and black trim rings) 12 Volt - 2.8 Watt 12 pieces LEDs 300 Lumens IP67 Applications: It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel Other applications include hard tops, arches, walkways, overhangs, and shower stalls *The "P" within the part number indicates retail packaging

A3C Downlight Kit - Cool White with Stainless Steel, White, & Black Trim Rings Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate. Features: Cool white (includes stainless steel, white, and black trim rings) 12 Volt - 2.8 Watt 12 pieces LEDs 300 Lumens IP67 Applications: It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel Other applications include hard tops, arches, walkways, overhangs, and shower stalls *The "P" within the part number indicates retail packaging

4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”  Mounting Holes: 5-5/8” apart horizontally In the Box: 4” marine white flush mount spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

SR-L Series Marine Spreader Light - White Surface Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Surface Mount - White Light with Blue Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Surface Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lighting Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately) The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.  Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night. Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light

SCM-SL Series Flush Mount Spreader Light - White Housing - White The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty