NEW - The Log without a paddlewheel and no moving parts The Clipper EASYLOG shows speed, trip and total distance on a high visibility liquid crystal display. It utilises the RMC sentence from any GPS or plotter with an NMEA 0183 output. Alternatively the EASYLOG can repeat, using sentences VHW and VLW from an existing NMEA log. Technical Specifications: 40mm high characters Industry standard 110mm square case Speed in Knots with 0.1 knot resolution Trip in N.Miles with 0.1 N.Mile resolution Total Distance (N.miles/miles) Total log up to 9999 N.Miles 20 levels of backlighting Tactile keypad Speed trend indicator Current consumption 1.5mA at 12V (10mA with backlight) Opto isolated balanced NMEA input Includes Sun Cover This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wired Tactical Wind Mast Sensor A high performance system that sends NMEA wind speed and direction data 10 times a second. In demanding conditions, where high performance is essential, the Clipper Tactical wind mast sensor is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The sensor is supplied complete with a mast mounting kit, 20 metres of light weight cable and all necessary electrical connectors to complete the installation. The output data is in the NMEA 0183 format and can be used to drive any compatible display that utilises the MWV sentence. Features: Mast transmitter supplied with 20M of cable NMEA 0183 4800 Baud data sentence MWV – update rate = 10 per second Wind speed 0 to 99.9 Kts Wind direction 0 to 360° Supply voltage nominal 12V Wind sensor supply current 9mA This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Masthead & Data Box The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12V supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit. Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery. Easy installation with mast in place no wires to run down Simple masthead alignment through base unit Light weight - 190 grams Specifications: Sleep time > 15,000 Hours * Operating time > 2,000 Hours * Charging time < 150 Hours of bright daylight * Fully charged with no further daylight NMEA 0183 4800 Baud 0/P Level 0 to 12 volt from 220 ohm source resistance. NMEA data sentence MWV Supply voltage 6 to 16 volts. (Nominal 12 volts) Supply current 17mA Fuse 1 Amp.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GPS 24xd HVS GPS Antenna with Heading Sensor - NMEA 0183 The GPS 24xd position receiver and antenna gives you precise location with multi-band GNSS and heading accuracy even at slow speeds. Features: Navigate in more locations with expanded GNSS support Get high-sensitivity tracking with fast GPS update rate Accurately pinpoint your heading — regardless of speed It’s water-resistant (IPX7) to withstand the elements Install it easily with multiple mounting options The antenna is compatible with NMEA 2000® devices MULTI-BAND GNSS Multi-band GNSS provides location accuracy to within 1 metre to compatible marine multifunction displays, instrument displays and autopilots. MAGNETIC HEADING The magnetic heading sensor provides accuracy to within 3 degrees, stabilising charts, radar overlay and MARPA even at slow speeds. HIGH-SENSITIVITY GPS Fast 10 Hz position update rates provide high-sensitivity position, velocity and time data. MULTI-SBAS COMPATIBLE Multi-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of its signals. MOUNTING OPTIONS Installation is easy with under-deck, pole and surface-mount options.

NMEA 0183 Interface Cable The NMEA 0183 interface provides a bi-directional gateway between an NMEA 2000® network and NMEA 0183 devices. Ideal for retrofitting NMEA 2000 devices while retaining existing NMEA0183 components, this interface allows boaters a simple way to upgrade to newer technology, sensors, and devices without replacing a whole system.  For existing NMEA 2000® networks and systems, this also allows a user to add NMEA 0183 devices to your network, allowing you to choose the products best suited to your boat and sailing. Simple mounting, connectivity, and a low-profile design allow for easy installation. Features Easy to install Allows older products to connect to new, more modern products Supports NMEA 0183 Version 4.1 Filter NMEA 0183 rx/tx sentences and configure transmit frequency via Navico® Compatible with Lowrance®, Simrad®, and B & G® MFDs and instrument displays NMEA 2000 Compliant Standard Micro-C connector

NMEA 2000/NMEA 0183 Simulator/Analyzer USB simulator for the Marine Industry. Used to simulate NMEA 2000/NMEA 0183 traffic via PGN for analysis/simulation using a Windows-based downloadable software program.   Features: Fully configurable Perfect for installers and developers Technical Specifications: CE Certification - Marine standard IEC60945 Comm Method - NMEA 2000® Connector - NMEA2000® Micro Housing Material -  Plastic Inputs/Outputs - 1/2 NMEA 2000 LEN - 1 RoHS Compliant - Yes Voltage - 9 to 32 VDC Waterproof Rating - IP42 In the Box: Simulator USB Cable 3' (.3M) Software (download key) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

G2 Satellite Compass - NMEA 0183 with 15M Cable Accurate Heading & Precise Position for Professionals Features: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25° rms Position accuracy < 0.3m 95% confidence (DGPS) An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals IMO Compliant G3 color display system (optional) Engineered enhancements to exceed sealed IP67 rating Extended 2 year warranty NMEA 2000r interface Type approved as primary heading AND positioning device Heave, Pitch, Roll and Rate of Turn as standard output Heading updates 1 to 20 Hz BAUD Rate selectable: 4800, 9600, 19200, 38400,115200 Fully compatible with on board NMEA 0183 RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots Compact integrated surface mounting (Pole mount optional) IMO Compliant, Wheelmark and USCG approved Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date 1PPS output standard 15 meter serial cable standard (30 meter optional) 6 meter NMEA 2000® Cable (Optional) CE certified for EMI and RFI immunity Worldwide service

G1 Satellite Compass - NMEA 0183 with 15M Cable Accurate Heading, Position & Rate of Turn Features: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25° rms Position accuracy < 0.3m 95% confidence (DGPS) An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals G3 color display system (optional) Engineered enhancements to exceed sealed IP67 rating Extended 2 year warranty NMEA 2000® interface Heave, Pitch, Roll and Rate of Turn as standard output Heading updates 1 to 20 Hz BAUD Rate selectable: 4800, 9600, 19200, 38400,115200 Fully compatible with on board NMEA 0183 RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots Compact integrated surface mounting (Pole mount optional) IMO Compliant, Wheelmark and USCG approved Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date 15 meter serial cable standard (30 meter optional) 6 meter NMEA 2000® Cable (optional) CE certified for EMI and RFI immunity Worldwide service

GPS160 TriNav Sensor with NMEA 0183 Output The GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies. TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc The GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables. The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification. The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability. Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020. Features: 72 channel GPS, Glonassand Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount

Color LCD NMEA 0183 Repeater Features: Maximum performance and simple setup Clear 4.3" Color LCD Display that is viewable even in the harshest sunlight conditions Bonded color LCD ensuring condensation free operation as well as great visibility Utilizing NMEA-0183 interface external sensors can easily be connected for simple and reliable operation 18 Different Display Modes Converts from L/L to Loran C, Loran A, & Decca LOPs Track Plotter features 10,000-point, 100 Route, & 3,000 track point memory Low 4.5-watt power consumption, 10.8 to 31.2 VDC power supply Very easily flush mounted Specifications: SI-TEX Model KRD-10 Display: 4.3" color LCD Display Resolution: 480 x 272 pixels (WQVGA) Display Mode: Compass, Rate of turn, Rudder Angle, Navigation, Plotter, Water Temperature, Highway, Weather Info, Standard Input & Output: NMEA-0183 versions 1.5, 2.0, 3.0 Nominal Voltage: 10.8 to 31.2 VDC Water Protection: IPX6 Dimensions: 5.75" W x 5.75" H x 2.75" D In the Box: KRD-10 Display with Mounting Bracket, Knobs, Sun Cover Power Cable & NMEA Interface Cable Operation Manual 18 Functions Including: NAVIGATION STEERING HIGHWAY   DEPTH WATER TEMPERATURE WIND HEADING COURSE RATE OF TURN POSITION CURRENT WEATHER DATA

Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183 Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication. It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class. Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it. The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration. Features: Designed for NMEA 0183 Easy programing and installation Technical Specifications: Operating Voltage - 8 to 32 V Protection Class - IP6K7 Illumination - Red LED Dial - Black w/graphics Pointer - Red Illuminated Lens - Plastic Double Lens (anti-reflective) Operating Temp. - -40°C to 115°C Connector - Molex MX150 - 12 pin In the Box: Gauge  Wire Harness Mounting Spinlock Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LANLink NMEA 0183 To Ethernet Gateway More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data. LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information. It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data. Features: NMEA 0183 to ethernet gateway version 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection The web user interface for easy setup from the connected device via the browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

NMEA 0183 Cable 10P f/GP33 Features: NMEA 0183 Cable 10P For GP33 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 0183 10 Meter Connection Cable A 10 Meter NMEA 0183 connection cable specifically for Maretron's SSC200 & SSC300 Solid State Compasses.

NMEA 0183 Threaded Cable Right Angle - 6' Connect your GPSMAP® device with this 6' (1.8M) threaded NMEA 0183 cable for data communication. The right-angle connector helps with the tight fit often associated with flush mounting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.