BERKELEY B82456-01, SSHM-2 SERIES PUMP Berkeley B82456-01 SSHM-2 Series Stainless Steel Centrifugal Pump, 2 HP, 230 Volts, Single Phase, 1-1/2" Suction, 1-1/4" Discharge.   Contact us for shipping cost at www.clrmarine.com/Contact_Us

BERKELEY 111P2700, O'RING SLEEVE, SSHM-2 4X142

BERKELEY M13784, MOTOR BKT MACHINED - SSHM-2

Berkeley S39518 CP High Head Berkeley S39518 is a high head, series CP, centrifugal pump with a noryl impeller.  The CP series pumps have a heavy-duty cast iron construction and feature a heavy-duty motor with easy service design and four-position discharge.   Features 3/4 HP Motor Voltage: 115/230 Pipe Tapping Sizes:  Suction 1-1/4 in, Discharge 1 in. Drain port provided for easy winterizing All models include replaceable wear ring and feature back pull-out design for easy serviceability CP Series with Noryl impellers are abrasion-resistant for normal applications with working temperatures to 140°F   Applications Water systems and sprinkling for homes, farms and industry This item has a warranty of 12 months from date of original installation, or 18 months from date of manufacture.  

Oberdorfer N2000S18-01 3/8" Brz Peo Pump Ptfe Seal

Jabsco 18777-0001-B Neoprene Impeller Kit Neoprene impeller material for water pumping applications Spline drive hub 10 impeller blades 2 1/4 in. diameter x 2 in. width x 5/8 in. shaft Used in Jabsco 50410, 22110, and 23800 model crank shaft driven pumps Impeller profile HH in Jabsco impeller identification charts Replaces Jabsco 22120-0001, 18777-0001, 18777-01 Replaces Volvo Penta 876120 Replaces Marine Power 527272

Gianneschi CB25/16B-B 230V 50Hz Mpu Gianneschi CB-25/16-B-B-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 1.1 KW (1.5 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1-1/2 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the CB25/16BB230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating.

Sherwood GC1-01 Pump Cummins Sherwood pump GC1-01 for Cummins Diesels. This pump replaces GC1.   Pump Body: Bronze Ports: 1 1/2" Hose Cam: Full Impeller: Neoprene Shaft Seal: Mechanical Drive: Flange Mounted to Engine Impeller Kit: 15000K Minor Repair Kit: 23980 Major Repair Kit: 23981

Flojet D3231B1311AR Mpu 24V B/B 2C N/Sw Bp50 The Duplex II series of pumps incorporate the best technology features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications. Features : Self priming up to 8 feet (2.4 m). Can run dry without damage. Chemical resistant material. Internal bypass standard. Built-in back flow preventer. Heavy duty ball bearing drive system. UL, CSA and CE models available. Specifications: Diaphragm Pump Duplex II 24V 3/8" FNPT Ports 1.6GPM No Switch Bypass 50psi Polypropylene Buna Valves Buna Diaphragm. Full RFI Noise Suppression

Micropump GJ-N25.PF1S.B Pump Head B Mount Micropump 81809 GJ Series Pumphead with Port/fittings 1/8-27 (F) NPT Side Ports, Max Speed 5500 RPM, Max Pressure 300 psi and Max Temp 77 (C). Micropump GJ-N25.PF1S.B Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81809 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GJ Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 77 Max Diff. Pressure (psi): 69.6774193548387 Displacement (ml/rev): 0.91 Design: Standard Design Gear Set: 0.500/2/24 (0.91ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: PTFE Gasket (.004) 5369 Base Materials: 316SS Drive Mount: MP Plate Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: PPS (carbon fiber/ptfe) Shafts: 316SS Gear Trim: None Part Number: 81809 Model: GJ-N25.PF1S.B

March 140 Series Mag-Drive Centrifugal Pumps     • Use the compact Series 140 pumps where maximum flow with minimal pressure is desired. Maximum flow is 12.5 GPM (55 LPM) and maximum head is 11.5 ft. (2.5m) • Series 140 pumps use Open Frame Skeleton Type Motors or 1/20 HP (.037 kw), 2900 rpm 115 volt air-cooled motors. • Materials used are glass-filled polypropylene, Buna N rubber, ceramic, Ryton®, Teflon® and Viton®. • Maximum Liquid Temperature is 190 degrees F     March Pump Mag-Drive Centrifugal Pump 230V Open Frame Skeleton Motor 12.5GPM 1 1/8" Hose Inlet, 7/8" Hose Outlet  

BURKS 22403-6.25, WET END FOR 2" G6 PUMP Pump kit Only* for all G6-2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22403-6.25 For assembly on motor with a 213-215JM Nema frame Motor (check motor specs.). Full size impeller is 6.25 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

BURKS T350G6-1 1/2, CENTRIFUGAL PUMP 3PH 5HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 5 Horsepower, TEFC Motor Enclosure, Frame Size 184JM   UNSPSC Code: 40150000

Gianneschi SUPER LARIO 2 Bronze Hand Pump 1" Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.

Walbro FRB-22-2 12V Fuel Pump 8-11Psi Voltage: 12V DC Weight: 1.83 lb Inlet Filter Screen: 70 Micron Magnetic Trap: Yes Minimum Flow Rate: 43 gph Dry Lift: 48" Current Draw: 2.3 Amp Inlet/Outlet: 1/4-18 NPSF Fuse: 5A Service Life: 18,000+ hr Outlet Check Valve: None Pressure: 8.0 - 11.0 psi