|
TCL4 9" Locker Door - Black
Keep storage areas dry with this tried, tested, and trusted black Whale locker door/deck hatch.
Features:
Reliable watertight seal
Measurements:
Diameter: 228 mm (9 in.)
Aperture: 179 mm (7 in.)
Materials:
Body: Polycarbonate
Locking Ring: Acetal
Seal: Nitrile
|
49.61 |
|
|
TCL2 9" Locker Door - Diecast Aluminum
Keep storage areas dry with this tried, tested, and trusted aluminum Whale locker door/deck hatch.
Features:
Robust aluminum construction with a locking lever
Ideal for harsh marine environments
Measurements:
Diameter: 228 mm (9 in.)
Aperture: 179 mm (7 in.)
Materials:
Body: Diecast aluminum alloy
Seal: Nitrile
|
101.22 |
|
|
TCL4 9" Clear Locker Door
Keep storage areas dry with this tried, tested, and trusted black clear locker door/deck hatch.
Features:
Allows for easy inspection without having to open the door
Measurements:
Diameter: 228 mm (9 in.)
Aperture: 179 mm (7 in.)
Materials:
Body: Polycarbonate
Locking Ring: Acetal
Seal: Nitrile
|
56.48 |
|
|
Spa Side Smartphone Enclosure with Door - Black
PolyPlanar is the leading manufacturer of spa specific audio systems designed in the USA. The Poly-Planar PM2 is designed to end the frustration of where to place your smartphone or MP3 while in the spa.
The sturdy ABS plastic housing was designed to accommodate any smartphone or MP3 player. Suitable for skirt mounting on spas or wall mount on saunas.
Specifications:
ABS Plastic Material
Water Resistant Enclosure
Flip-up cover protects contents
Cutout Dimension: 6" (154.5mm) x 3" (78.5mm)
Mounting Depth: 3.15" (80mm)
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
21.59 |
|
|
PED5100-01 PedestalPod Pre-Cut f/Humminbird HELIX 10 & HELIX 9 Series - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.
|
427.62 |
|
|
PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3 - Carbon Black
PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy-to-reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions. This protection assures the reliability and longevity of your marine electronics.
The PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution. RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing.
When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance. This will allow most boat covers to fit over the PedestalPod when not in use.
Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9”, and 12” LCD displays from all major marine electronic manufacturers.
PedestalPods – Protection, Convenience, Security.
|
654.53 |
|
|
Fairlead - Stainless Steel Lined - 14mm(9/16") ID - Black
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.
Features:
Impact resistant, U.V. stablised Nylon
Stainless steel liner
|
6.17 |
|
|
PP5100-01 PowerPod Pre-Cut f/Humminbird HELIX 10 & HELIX 9 Series - Carbon Black
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
427.62 |
|
|
Little Giant Submersible Pump 502403
Little Giant 2E-38N-BLACK Submersible or In-Line Pump,
Motor 115 Volt 60Hz 1/40 HP Permanently Lubricated Oil Filled Motor, 300 GPH at 1 Foot Head, Shutoff Head 11.8 Feet, Inlet: 3/8" FNPT or Screened, Outlet: 1/4" MNPT and 1/2" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord, Actual Pump Color is Black for Lower Visibility in Ponds or Fountains
502403 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 2E series in aquariums, swimming pools and fuel oil transfer applications
|
215.28 |
|
|
Johnson 05-32-9 Electric Coil
Johnson Electric Coil 32V
|
154.15 |
|
|
BURKS 20522-9, REPAIR KIT FOR CS9M
Repair Kit for All CS9M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1638.12 |
|
|
BURKS 22571-9.00, Wet End Kit for Series G9A-1-1/2
Pump kit Only* for all G9-1-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22571-9.00 For assembly on motor with a 213-215JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
2971.31 |
|
|
BURKS 22609-9.00, Wet End Kit for Series G9-2
Pump kit Only* for all G9-2 Series, 254-256JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22609-9.00 For assembly on motor with a 254-256JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
4039.95 |
|
|
BURKS 22659-9.00, Wet End Kit for Series G9-2-1/2
Pump kit Only* for all G9-2-1/2 Series, 284-326JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22659-9.00 For assembly on motor with a 284-326JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
4105.50 |
|
|
FINISH THOMPSON A101981-9 Housing - PVDF
|
426.40 |
|