|
Bracket Mounting Disks - Quantity 6
An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the boat where the trolling motor is attached.
Benefits of using mounting disks:
Load Distribution: Multiple backing supports can distribute the load over a wider area compared to a single backing plate
Flexibility: Using multiple backing supports allows for more flexibility in positioning and alignment
Accessibility: Using multiple backing supports can make it easier to maneuver and install the components in tight spaces, as you can insert them one by one and secure them individually
*When using these backing disks, it is important to always have a fender washer between the disk and the lock nut. These disks are designed to work with 1/4-20 Phil flat machine screws. Sea Brackets recommends using machine screws with coarse threads.
|
31.50 |
|
|
AP48 Mounting Bracket
Bracket mount for additional flexibility
|
38.89 |
|
|
Sea Brackets
Brackets offers Trolling Motor Plates to help make Trolling Motor installs easy. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installations, up to 96" shaft length. Sea Brackets - Trolling Motor installs made easy!
|
|
|
Working closely with all the major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sailboats, pleasure and commercial. Seaview added a hardcoat anodizing process before powder coating to insure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry.
Powder Coated White Cable Glands - In Stock Now!
The Seaview Cable Glands / Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic, 316 stainless steel or black powder coated 316 stainless steel. Seaview cable gland options for 17mm to 334mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.
Specials Closeouts Remanufactured Rebates
|
|
|
3/8" Backing Disk for Minn Kota Quest - 2-Pack
Specifications:
Size: 3/8"
Backing Disk
Specifically for Minn Kota Quest
2-Pack
|
10.00 |
|
|
16" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
172.50 |
|
|
Small Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
18.5" x 13.5" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
274.50 |
|
|
Large Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
18.5" x 15.5" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
337.50 |
|
|
7" x 7" Removable Seat Bracket
Features:
Non-Locking 7″ x 7″ Removable Seat Bracket
Marine Grade Black Plastic
|
17.03 |
|
|
Mast Bracket with Flybridge Adapter Kit
18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms.
Features:
Anodized Marine Grade Aluminum and Powder Coated Brilliant White
Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms
Models available for all brands of radomes
|
504.00 |
|
|
20" Straight Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
217.50 |
|
|
Boat Cover Tie-Downs
Quantity: 6
Dimensions: 1" x 4'
Simply pass adjustable end of the Snap-Lock Boat Cover Tie-down around trailer frame, snap buckle together,and pull adjustable end snug.
|
21.46 |
|
|
March 0155-0092-0100 Bracket
Bracket (Mtr) w/Inserts for All 7's made from Ryton/Teflon/Carbon
|
258.96 |
|
|
Hold Down Bracket Kit for 964 Portable Toilets
Stainless Steel hold down Brackets for 964 series portable toilets.
In the Box:
Hold Down Brackets
Mounting Hardware
Legacy # 385310018
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
33.42 |
|
|
Hold Down Bracket Kit for 965
Stainless Steel hold down Brackets for 965 series portable toilets.
In the Box:
Hold Down Brackets
Mounting Hardware
Legacy # 385310239
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
42.23 |
|