SHURflo 80-120-01, Reverse Osmosis Booster System 220VAC The Shurflo 80-120-01 Pump is used for home RO water systems. It is a enclosed reverse osmosis booster low voltage motor. 220 Volts AC Input 80 PSI bypass valve Up to 50 GPD Continuous Duty 0.25" quick connect fitting

SHURflo 80-120-00 The 115 volt Shurflo 80-120-00 Home RO water system Pump. This RO booster systems is ideal for household use. Equipped with a high quality, continuous duty pump that provides a constant flow of feed water to the membrane, yet maintains quiet operation.   Up to 50 GPD 115VAC Input Safe Low Voltage Motor Continuous Duty 80 PSI Bypass 1/4" Quick Connect Fittings Includes Full Tank Shutoff Switch

Shurflo 8000-991-236, Diaphragm Pump 3 Chamber 0.56 GPM 24VDC Shurflo Diaphragm Pump 3 Chamber, 0.56 GPM Open Flow, 24VDC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports.   Typical Application: Reverse Osmosis Booster Pump  

SHURflo 8010-252-136, Diaphragm Pump 3 Chamber 0.95 GPM 24VAC SHURflo Diaphragm Pump 3 Chamber, .95 GPM Open Flow, 24VAC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, NSF Listed,   Typical Application: Reverse Osmosis Booster Pump, Water Delivery  

Shurflo 8010-252-256 Pump 24V 45Byp 60Psi Shurflo- Diaphragm Pump 3 Chamber, .95 GPM Open Flow, 24VAC (not DC) Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), 45 PSI Bypass, EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, NSF Listed, Typical Application: Reverse Osmosis Booster Pump, Water Delivery  

Shurflo 902-200 DC Controller For 9300 The 902-200 has all the features of the Shurflo's 902-100 pump controller and more. It optimizes your solar water pumping system by translating the current and voltage from your PV panels into a combination that is better matched to the pump's needs. This allows your SHURflo 9300-series pump to start pumping earlier in the morning and run later into the evening.   SHURflo 902-200 Pump Controller Features Increases daily water output by up to 30% Protects pump from low or high voltage conditions Switch-selectable for 12 VDC or 24 VDC operation Pump on/off switch Water-tight enclosure and cable inlets Terminals for float switch Includes water level monitor mode with probes and cable

SHURflo 8005-952-480 Diaphragm Pump Reverse Osmosis Booster Pump SHURflo Diaphragm Pump 3 Chamber, 21.8 GPH Open Flow, 24/36VDC Continuous Duty, 80 to 100 PSI Bypass (no switch), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports   SHURflo 8000 Series RO Pumps are the most widely used pumps for RO. They are ideal for high pressure / low flow applications with low amp draw. They can be mounted in any position, are compact, and are designed for long trouble-free life.

Shurflo 2088-554-144 Pump 12V Reverse Osmosis Booster Pump RO Diaphragm Pump with 12 Volt DC Motor and Automatic Switch. Polypropylene Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread.   Pump Body: Polypropylene Impeller:EPDM Shaft:Santoprene Port Size: Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread. Motor Specs: 12 Volt DC, Permanent Magnet, P/N 11-148-04, Thermally Protected. Wire: 12.5 Inch x 16AWG wires with Switch. GPM/PSI: 3.5 GPM 45 PSI

SHURflo 8008-943-839 Diaphragm Pump Spectra 125 PSI Replacement Pump This SHURflo diaphragm pump 8008-943-839 is the replacement pump for the Spectra 125 PSI Reverse Osmosis Booster Pump. Heat Sink 34-007 is recommended when using this pump with your RO system. Spectra Low Pressure RO Replacement Pump.

SHURflo 94-161-11100, Diaphragm Pump 115VAC Input SHURflo Diaphragm Pump, 115VAC Input, 36V Pump, 75 GPD, Reverse Osmosis

SHURflo 94-162-11100, Diaphragm Pump 115VAC Input SHURflo Diaphragm Pump, 115VAC Input, 36V Pump, 75 GPD, Reverse Osmosis

SHURflo 166-200-36, Air Diaphragm Pump 0.6 GPM SHURflo Air Diaphragm Pump, 0.6 GPM (2.3 l/min), Continuous Duty, Viton Valves and Diaphragm, Polypropylene Body, 20-60psi, 3/8” Hose Barb Fittings   Item Diaphragm Pump Type Air-Driven Injection  Inlet/Outlet (In.)3/8 HB Body Material Polypropylene Diaphragm Material Viton(R) Check Valve Viton(R) Max. Temp. (F)120 Length (In.) 5.80 Width (In.)3.80 Height (In.)7.00 GPM Max .0.6 Max. Pressure (PSI) 60 Self-Priming 25" Hg

SHURFLO 1-209-01, SCREW

Shurflo 94-120-00 Impeller Kit

SHURflo 94-379-01 Upper Housing   SHURflo Upper Housing, Nylon, 3/8" NPT Female Threaded Ports 94-379-01