|
SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder
The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.
|
75.00 |
|
|
The practical elegance of the SnapIt! M005 binnacle mounted drink holder with the added feature of the V Series versatile mounting system. Hold an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs!
Attaches directly to the pedestal guard, no other mounting hardware is needed and NO drilling. Versatile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and adjusts for 9.5, 12 and 12.5” center to center spacing on the pedestal guard. Use #2 Phillips screwdriver to attach unit.
Narrow profile is designed for pedestal guards that sit forward of the compass housing. For pedestal guards that have the compass sitting forward of the leading edge of the pedestal guard tubes please see SnapIt! models, M0023, V0023 or M0027.
Have pedestal guard on 9.5" centers and want the simplicity of snapping the unit in place? See item M005.
17.375" Wide x 4.625" Deep x 3.375" High
|
75.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.Functional system for holding an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard. No additional mounting hardware is needed and NO drilling.
If the compass on the boat extends forward of the leading edge of the tubes on the pedestal guard please see models M0023, M0027, V0023 or V0027.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V005.
|
75.00 |
|
|
SnapIt! Marine M0016 Single Lifeline Drink Holder for Sailboats
This Classic Lifeline Drink Holder is sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 10.15”. Guaranteed not to fall off accidentally! You get One drink holder this is longer than the V0016.
|
19.00 |
|
|
SnapIt! Marine M0023-350 Catalina 350
Model Specific Binnacle Drink Holder fits Catalina 350 Series II only and 387
This Drink holder Only Fits the Catalina 350 Series II and 387 with the pedestal that has the enclosed cabinet on it.
Features two integrated handheld electronics holders with interior openings of 2.875”x1.625” and 2.375”x1.625”.
Overall height is 3.5".
This is a SPECIAL ORDER ITEM, made at time of order. NO Returns.
Does not fit Catalina 350 MK II.
|
76.00 |
|
|
SnapIt!’s V Series Lifeline Drink Holder. Sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 9.75”. Guaranteed not to fall off accidentally!
|
19.00 |
|
|
SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder
This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc.
Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White
|
62.00 |
|
|
SnapIt! Marine P005 Top Mount Pontoon Quad Drink Holder
Quad Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Mug Opening Diameter 3.625”. Interior Dimension 3.895”(3.45” at narrowest point)x8.12”. Overall Height 3. 6”. Overall Width 18.4”. Top mount unit can be used in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
62.00 |
|
|
Single Pivoting Drink Holder sized for canned drinks with insulated sleeves.
I.D. 3.625” Overall Height 4”.
Includes the UniClamp, which fits round tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm). Plus offers the option of bulkhead mount with enclosed screws. Designed for permanent mounting.
Intended primarily for mounting to angled tubes on the boat.
|
31.00 |
|
|
Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4.1”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove. Designed primarily for mounting to angled tubes on the boat. As there is no mechanical clamping hardware supplied this unit is not suited for steeply angled or horizontal tubes.
|
31.00 |
|
|
SnapIt! Marine T009C Large Cell Phone Holder
Holds large cell phones. Will fit phones up to 3.7" wide X .77" thick. Order to fit your specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft.
|
19.00 |
|
|
The V0023 Curved Binnacle Drink Holder offers the same functionality as the M0023 with clearance for the compass on the pedestal. It also holds four beverages, including mugs, or two drinks and a pair of binoculars. Verstile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and mounting locations for 9.5", 12" and 12 1/2" center spacing.
Don't know your tubing diameter or center to center spacing--concerned about taking the unit with you when you upgrade? No problem! This unit fits the majority of standard binnacle guard sizes.
No holes to drill! All mounting hardware included!
Have a pedestal guard on 9.5" center to center measurement and want the simplicity of snapping the unit in place? See item M0023.
|
75.00 |
|
|
Double Drink Holder for Power & Sailboats
This Double Drink Holder is sized for canned drinks with insulated sleeves. Interior Dimension 3.625” (2.5” at narrowest point) X 7.85”. Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.
|
31.00 |
|
|
Conveniently hold 2 12 oz cans or 20 oz soft drink bottles with this economical holder. Can be easily moved around on the boat and stored below to avoid theft.
Order for specific tubing diameter.
|
19.00 |
|
|
Attention Sailers!!!
Do you have a Binnacle mounted compass that is looking really bad?
Now is the time to update to a New Ritchie DNP-200 Navigator Compass.
We have one in stock in our clearance section selling for have the price.
Ritchie Navigator Compass
Navigator Compass Features:
4-1/2" PowerDamp Flat Card Dial with Large Numerals
Brushed Stainless Housing
Ideal for both Power and Sail Boats
Fits all Popular Sailboat Steering Pedestals
Exclusive Built-in Green NiteVu Night Illumination
Built-in Compensators to Easily Adjust for Deviation
Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement
Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions
Powerful DirectiveForce Magnets for Fast Heading Lock-on
Movable Sun Shield
45 Degree Lubber Lines
High Temperature Construction for Extended Operating Range
Custom Fitted Protective Covers Available (weather shield model no. WS-P)
Easily Installed, Fits 5.25" (13.35 cm) Mounting Hole
100% Repairable
Exclusive 5-Year Ritchie Warranty
Get it today before it's gone at
https://www.clrmarine.com/m4/10377--ritchie-dnp-200-navigator-compass-binnacle-mount.html
|
|