SnapIt! Marine T009C Large Cell Phone Holder Holds large cell phones. Will fit phones up to 3.7" wide X .77" thick. Order to fit your specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft.

RAM Universal X-Grip Cell Phone Holder w/1" Ball Part #: RAM-HOL-UN7BU Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

RAM Twist Lock Suction Cup Mount w/Universal X-Grip Cell Phone Holder The RAM-B-166-UN7U consists of a 3.25" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 6 Apple iPhone 5s Apple iPhone 5c Apple iPhone 5 Apple iPhone 4 Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung GALAXY S4 Samsung GALAXY S5 The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Lifetime warranty 7. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM EZ-Strap Rail Mount w/Universal X-Grip Cell Phone Holder The RAP-SB-187-UN7U consists of the RAM EZ-Strap base, double ball SHORT arm and universal X-Grip holder. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the universal X-Grip holder to your optimum viewing position. This mount rotates 180 degrees. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 6 Apple iPhone 5s Apple iPhone 5c Apple iPhone 5 Apple iPhone 4S Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung GALAXY S4 Samsung GALAXY S5 The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 6. Single socket technology allows for multiple adjustment angles and articulation of device 7. Lifetime warranty Material: High Strength Composite & Stainless Steel Note: The "U" in the part number reflects product packaged in poly bag.

  Holds most small flip phones with exterior dimensions less than 2.2” W X .6” D or less than 1.79” W X 1.05” D. Overall Height 3”.           Order to fit specific tubing size.           Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.         When checking out include the width and depth dimensions of your cell phone with any protective case in the Comments Box as this is a custom made product.  Allow three extra days for delivery.

1501 Tool and Cell Phone Holder  This deluxe maintenance tool holder has a built-in cell phone holder, an electrical tape strap, 4 pockets, a flashlight loop, and can attach to your belt or has a rear flap that will slide conveniently into a pocket for carrying. Features: Attach to belt with snap closure or carry securely in pocket with wide padded flap Webbing slot for small flashlights or other tools Electrical tape sling Made of polyester fabric 4 pockets and 1 padded pocket to fit most compact cell phones *Sold as an Indiviudual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Holds most large display phones with exterior dimensions less than 2.65” W X .65” D or less than 2.0” W X 1.1” D. Flexible fingers can be positioned to hold phone snugly. Overall Height 3.5”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.

SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).

SnapIt! Marine M0019 Wine Glass Holder for Sail & Power Boats Wine Glass Holder, use the supplied retainer hoop for permanent mounting or use the unit without the hoop for the convenience of snapping the unit on to various tube locations. I.D. 2.05” Overall Height 1”.

SnapIt! Marine V002 Double Drink Holder for Sail & Power Boats   Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.      Interior Dimensions 3.625” (3” at the narrowest point) x 7.85”.  Overall Height 3.95”. Includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm) round tubing. Plus offers the option of bulkhead mount with enclosed screws.

SnapIt! Marine M001 Single Drink Holder for Power & Sailboats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

RAM EZ-ON/OFF Bicycle Mount w/Universal X-Grip Phone Holder No matter where your adventure takes you, it is highly likely that your smartphone is within hands reach. For the outdoor biking enthusiast, the RAM Universal Bike Mount is the most complete mounting solution for attaching a smartphone to your bike. Compatible with most any smartphone, the X-Grip cradle has a clean and clever four leg design that sports great holding power, but also allows for easy insertion or release of your phone. Designed to fit most common handlebar sizes, the included base uses common zip ties to attach to a variety of handlebar diameters. Made of high strength composite, it is light weight too. Adjustable to allow for the best viewing angle, this product is perfect for any cyclist or open trail adventurer. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 6 Apple iPhone 5s Apple iPhone 5c Apple iPhone 5 Apple iPhone 4S Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung GALAXY S4 Samsung GALAXY S5 The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Rail Dimensions: The zip ties will attach to rails, from a minimum of 0.5" in diameter. Included is a 12 degree tapered shaft for tapered handlebars. Overall length of the each zip tie is 7". Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Lifetime warranty 6. Made in U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

1105 Cell Phone  and Tool Holder This 5-pocket tool and cell phone holder includes a small flashlight sleeve, a hook for your key ring, a hook-and-loop flap closure, and versatile 3-way attachment to your belt, suspenders, pants, etc. Features: Made of durable polyester fabric Holds most brands of compact cell phones Securely holds small tools and accessories like pliers, mini-flashlights, screwdrivers, multi-tools, etc Versatile 3-way attachment for pants, web suspenders, work aprons, etc Large back pocket dimensions (H x W x D) - 6" x 2" x 1" *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Holds large cell phones and smaller GPS receivers and VHF radios. Interior Dimensions 2.3”X1.7” at widest points. Overall Height 3.8”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

Holds large cell phones and smaller GPS receivers and VHF radios. Interior Dimensions 2.3”X1.7” at widest points. Overall Height 3.8”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.