|
F38B-19 Multi-Use Utility Pump - Capacity 9GPM / 35 L/MIN
With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products.
Perfect for bilge pumping, deck wash, water circulation, oil and diesel refueling at dockside service, etc. The motor has a built-in thermal overload for added protection.
Features:
Limited 3 Year Warranty
Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc.
Oil-resistant impeller
Self-priming
Easy maintenance
Handle debris (bilge pumping)
Self-priming
All motors are heavy duty to provide long service life even under heavy use
Available in 12 or 24 volts
Specifications:
Body: Bronze
Impeller: 09-824P-9
Seal: Lip seal
Connection: Hose 1" / +" NPT
Length: 180 mm - 7"
Width: 120 mm - 4.72"
Height: 90 mm - 3.54"
Weight: 3 kg - 6.6 lbs
|
207.41 |
|
|
F3B-19 - Capacity 21 l/min
Perfect for bilge pumping, deckwash, water circulation, oil
and diesel refuelling at dockside service, etc.
Description F3B-19, 12V
Body Bronze
Impeller 09-843S-9
Seal Lip seal
Connection 3/8" NPT
Length 170 mm - 6.7"
Width 113 mm - 4.4"
Height 82 mm - 3.22"
Weight 2 kg - 4.5 lbs
|
198.52 |
|
|
1000 GPH Multi Port Shower Sump Pump 12V with Switch
This compact shower sump system is designed to meet the higher demands of today's boating industry where more equipment is used. This also includes the freshwater system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling wastewater from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter.
*CE-Approved
Features:
Includes the L650 Duo pump and a mesh filter for easy cleaning
Multiple inlet ports
Handles wastewater from more than one tapping point
Tight-fitting lid to minimize splashing and odors
Check the valve on the outlet
Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH
Capacity straight (13.6 V/27 V):61 l/min - 972 GPH
Amperage: 3.4 A
Fuse Size: 5 A
Pump Body: Thermoplastic
Shaft Seal: Lip seal
Voltage: 12 V DC
Intake Hoses: 1x3/4", 1x3/4" or 1x1"
Discharge Hose: 3/4"
|
112.60 |
|
|
Johnson 10-13406-103 Series 4.0 Aqua Jet Water Pressure System
Johnson Pump 10-13406-103 Aqua Jet 4 GPM Water Pressure Pump. The new generation of WPS pumps - 12V DC. Quiet and pulsation-free even at low speeds, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. WPS 3.5 fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise.
4.0 GPM Aqua Jet Water Pressure System Pump
12 volt DC operation
Smooth and pulsation free flow due to five chamber design
Lower noise and water pulsation characteristics when compared to conventional three or four chamber diaphragm pumps
Designed to use with an accumulator tank
Capacity: 4 GPM
Pressure Cut in: 24 PSI
Pressure Cut off: 41 PSI
Fuse Size: 10 amp
Connection: 3/8 in. NPT/hose 1/2 in. 1/2 in. NPT /hose 3/4 in. 1/2 in.-14NPSM
Motor: 100W
Length: 9.46 in.
Width: 8.42 in.
Height: 4.33 in.
Johnson 10-13406-103 4.0 Aqua Jet Water Pressure System 12V
|
290.95 |
|
|
Aqua Jet Wash Down Kit 5.2
New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5 meters (25') of coiled wash down hose all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat.
CE-Approved
Feaures:
Whisper quiet operation
Five-chamber construction
Smooth flowing
Self-priming
Easy, low cost maintenance
Quick-connect hose
Long service life
Connection: 1/2" NPT / hose 3/4". 3/4" GHT, Hose 3/4" GHT
Bulkhead fitting - Inlet 3/4" hose, outlet 3/4" GHT
|
272.59 |
|
|
Compact toilet handling and waste water pump Viking Power Vacuum
The Viking Power Vacuum diaphragm pumps have been designed to meet the rigorous demands of the world's leading manufacturers of boats, recreational vehicles and busses. The Viking Power Vacuum has double check-valves and can therefore also be used in vacuum toilet systems. Naturally, pumping ordinary shower or sink drain water or bilge water is no problem for either pump.
Like the Viking Power 16, this new pump has been engineered with a ball-bearing supported transmission for long service life. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 32/Vacuum provides maximum flow of 32 liters per minute and is self-priming up to a height 3.5 (Vacuum) meters.
Although powered by an electric motor, this pump can also be cranked by hand in an emergency. The pump has been designed to prevent the leakage of unpleasant odors; and the Viking Power 32/Vacuum can be installed in a variety of different positions. The Viking Power 32/Vacuum is built to last, yet priced competitively.
Features
Maximum flow 32 l/min
Specifically engineered to pump black wastewater
Uncompromising odor-prevention features
Whisper quiet operation
Self-priming
High-impact glass-fiber reinforced nylon body
Ball-bearing supported transmission
Non-choke valves - no waste shredding required
Pump head rotatable 360°
Double check valves on Viking Power Vacuum
Self-priming up to 2.5 meters (8.2 feet)
Can be run dry and can pump air/water mixture
Robust single diaphragm
Electric motor with power-out, manual-crank backup
Complies with ISO 15083 and small craft bilge pump
Standard for vessels above 12 m (39.4 ft)
|
331.85 |
|
|
Aqua O2 Twin Port 500 GPH Aerator Pump - Flex Mount - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 585 GPH (37 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 9.6 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
43.50 |
|
|
Aqua O2 Twin Port 800 GPH Aerator Pump - Flex Mount - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 810 GPH (51 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 10.4 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
46.50 |
|
|
Johnson 10-24501-03 Mag Drive Pump 12V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring:EPDM
Motor: 12 or 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
General Purpose Pump FIP F3 - 24V
DC 24V F3 size FIP pump with capacity 35 L/min (9,3 GMP). Used for pumping water, oils and chemicals.
Features:
Pump body in brass, stainless steel shaft and high quality impeller
Self priming up to 3m vertical lift
Reversible flow direction
Interchangeable with Johnson Pump 10-24516-02
Specifications:
Weight: 0.8 kg/1 lb
Dimensions: 160/6.3L x 90/3.5H x 120/4.7W mm/in
Port Connection: 19mm (1/2″)
Fuse: 4A
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
107.93 |
|
|
Talulah High Flow Ballast Pump - 30 GPM - 12V
With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.
Features:
Built in Thermal Overheat Protection: Automatic reset after cooling down
Monitor Filling: Tanks must have overfill protection
Retrofit Possible: Important to have full bore hoses – without restriction
Dry Run Impeller*
Intermittent Duty
Important to have good electric installation and proper wire size (Acc. to ISO 10133)
Recommend fresh batteries and engine running (alternator running) to ensure power supply
*Dry Run
|
308.15 |
|
|
Johnson 10-24502-03 Mag Drive Pump 12V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring: EPDM
Motor: 12 or 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Johnson 10-24504-04 24Vdc Magnetic Drive Centrifugal Pump
Johnson CM30P7-1
A line of compact Magnetic Driven centrifugal pumps, the CM30P7-1 models combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks or heating and cooling systems in buses and limousines.
Designed for continuous operation with water or water/glycol mixture (maximum 60% glycol).
Not Warrantied For Salt Water Use But We Have Seen Customers Use Them For Salt Water.
Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C), do not allow water to freeze inside pump.
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-Ring: EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 Hour Motor Life.
IP67 Rating, Weather-Proof and Dust-Proof, Not Submersible.
Maximum 27 Watt Draw on CM30 Models.
|
198.59 |
|
|
Johnson 10-24501-04 Mag Drive Pump 24V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring:EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Johnson 10-24502-04 Mag Drive Pump 24V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 3/4" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring: EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|