|
Talulah High Flow Ballast Pump - 30 GPM - 12V
With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.
Features:
Built in Thermal Overheat Protection: Automatic reset after cooling down
Monitor Filling: Tanks must have overfill protection
Retrofit Possible: Important to have full bore hoses – without restriction
Dry Run Impeller*
Intermittent Duty
Important to have good electric installation and proper wire size (Acc. to ISO 10133)
Recommend fresh batteries and engine running (alternator running) to ensure power supply
*Dry Run
|
308.15 |
|
|
Talulah High Flow Ballast Pump Impeller Kit
For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.
A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.
|
38.52 |
|
|
Talulah Ballast Pump - 13.5 GPM - 12V
Features:
Built in Thermal Overheat Protection: Automatic reset after cooling down
Monitor Filling: Tanks must have overfill protection
Retrofit Possible: Important to have full bore hoses – without restriction
Dry Run Impeller*
Intermittent Duty
Important to have good electric installation and proper wire size (Acc. to ISO 10133)
Recommend fresh batteries and engine running (alternator running) to ensure power supply
*Dry Run
|
237.04 |
|
|
Aqua Jet WD 3.5 GPM 12V Pump Kit
Features:
Max 13 I/min/3.5 GPM
Max Pressure 70 psi / 5 bar
7.5 m / 25' coiled hose 1/2" I.D
Bulk Head fitting with Valve
PUMProtector inlet strainer
Spray nozzle with check valve
|
229.63 |
|
|
Aqua Jet WPS 2.9 GPM - 12V NPT - 2.8 Bar
Quiet and pulsation free even at low speeds, the Aqua Jet five chamber diaphragm pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sounds levels in relation to water flow are placed at a premium - such as in shower and galley applications. Operates in fresh or sea water. Self priming. It is recommended to install pump with an accumulator tank. Always use a PUM Protector inlet strainer before the pump intake. 85 watt motor with PP/PPA body, EPDM valves and santoprene diaphragm. 8.02" L x 7.76" W x 4.33" H. Weight: 3.5 lbs. Capacity: 2.4 GPM/Pressure Cut-Off: 41 psi/Fuse Size: 10 Amp/Connection: 3/8" NPT/hose/1/2", 1/2" NPT/hose 3/4".
Features:
5-chamber Aqua Jet WPS pumps provide a reliable "heart" for small boat and RV water pressure systems
Lower noise and water pulsation
2.9 GPM Capacity
|
97.78 |
|
|
Aqua Jet WPS 4.0 GPM 12V NPT - 2.8 Bar
Features:
5-chamber Aqua Jet WPS pumps provide a reliable "heart" for small boat and RV water pressure systems
Lower noise and water pulsation
4.0 GPM Capacity
|
186.67 |
|
|
Talulah Ballast Pump Impeller Kit
A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.
|
32.59 |
|
|
AquaT Toilet Silent Electric Comfort - 12V with Pump
The AquaT Silent Electric Marine Toilet combines competitive pricing, a fine finish, and thoughtful design in a quiet, robust, and easy-to-clean marine head.
Features:
Equipped with proven Aqua Jet diaphragm pump
The toilet is quiet, hygienic, and reliable
Made with corrosion-resistant components throughout
The water inlet and outlet take place in two distinct steps
Low water consumption (2 - 2.5 liter/flush)
Two-way switch
May be installed above or below the waterline
Versatile plumbing connection options
Automatic back-flow prevention
Long service life
Complies with ISO 8846, ignition protection, and EN 55014 EMC
Specifications:
Height: standard marine
Bowl Style: Household
Materials: vitreous porcelain bowl for ease of cleaning, robust wooden seat, and cover with baked enamel finish
Water Supply: raw sea or lake water, Aqua Jet diaphragm pump
Inlet Hose: 0.75" ID
Discharge Hose: 1.50" ID
|
394.08 |
|
|
Johnson 10-24503-03 Mag Drive Pump 12V CM30P7-1
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring: EPDM
Motor: 12 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
Maximum 14 Watt Draw on CM10 Models
Maximum 27 Watt Draw on CM30 Models.
|
198.59 |
|
|
Aqua Jet Washdown 4.0 GPM Pump Kit - 12V
Quiet and pulsation-free, the Aqua Jet Washdown 4.0 GPM Pump Kit provides the perfect deckwash solution for both small and medium sized leisure and commercial boats.
Features:
4.0 GPM
12V
|
192.00 |
|
|
Supa Tsunami Pump
Compatible with FatSac ballast bags, the Tsunami pump got a total redesign and a new kink-proof hose for faster fill/drain times.
The Tsunami Pump has been around for years but it has received a total overhaul. The all-new Supa Tsunami Juiced Edition Pump is a pre-packaged, fully submersible portable pump solution designed for quick and easy filling of FatSac ballast bags.
Thanks to the high capacity 1700GPH motor and oversize 1-1/8" tubing, the Tsunami ballast pump makes it quick and easy to fill/drain the FatSac bags in your boat. FatSac Quick Twist Adapter quick connect fittings are a standard feature which means connecting the pump for filling and draining is a snap.
The new pump includes a black kink-proof hose that ensures maximum water flow for optimal fill/drain times.
Features:
New Supa Tsunami Pump, Juiced Edition
Currently the most lightweight fastest pump from start to finish, just got even Faster with the Supa Tsunami
Kink proof black helical tiger hose
12.5' long hose for deeper hulls and longer boats
20' long cigarette adapter wire length
SS edition cigarette outlet adapter that won't rust
Same lightweight shell with a gray color and updated logo
Motor inside that increases speeds up to 40%
Proprietary custom machined FatSac fitting to replace the white elbow for 10% faster water flow
Still the only self-priming pump on the market
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
107.99 |
|
|
Aqua O2 Flex Mount 500 GPH Aerator Pump - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPSM thru-hull inlet that can be used straight or 90-degree
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 585 GPH (37 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 9.6 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
43.50 |
|
|
Aqua O2 Flex Mount 800 GPH Aerator Pump - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPSM thru-hull inlet that can be used straight or 90-degree
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 810 GPH (51 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 10.4 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
47.26 |
|
|
Aqua O2 Twin Port 500 GPH Aerator Pump - Flex Mount - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 585 GPH (37 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 9.6 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
43.50 |
|
|
Aqua O2 Twin Port 800 GPH Aerator Pump - Flex Mount - 12V
Johnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.
Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 810 GPH (51 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 10.4 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
|
46.50 |
|