|
Dual Actuator Marine Hardware Pack
High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.40 |
|
|
Marine / Boat Hardware
We offer a full selection of marine hardware, including anchor rollers, anodes, ski tows, vents, and more. If you have a boat and need hardware, you are in the right place. From chocks and cleats to shaft seals and steering wheels, you can count on us for your boat hardware needs. It can sometimes be difficult to find everything you need for your boat, especially all in one place, but our full service site gives you plenty of excellent options for all the hardware you will need for your boating excursion.
Bow & stern eyes, deck fills, deck plates, and engine mounts are all available here, along with gas springs, grab handles, and hatches. We also have a wide assortment of hinges, hooks & clamps, and latches so you can find just the right option for your boat. With oarlocks, rail fittings, rub rail, shaft couplers, and swim platforms, as well as a selection of rope & chain pipe, you can find the things you need the most. We also have a selection of marine lumber, including teak. By using teak lumber for your marine needs, you have a great wood look that will hold up to the elements, and you can get it right here with all your marine hardware.
|
|
|
Shurflo 8020-513-236 Pump 115V 60Sw Pvs
Shurflo- Diaphragm Pump 3 Chamber, 1.5 GPM Open Flow, 115VAC Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), Viton Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, Has a Power Cord, UL/CSA Recognized, General Industrial Pump
|
246.75 |
|
|
Watch the Weather.
Even the best-laid plans for the perfect boating outing can be turned upside down by Mother Nature. Watch the sky. Know what to look for in clouds. Be very conscientious about spotting lightning. It never hurts to know as much as you can about the weather. Courses are available at local colleges and online on what to look for in the sky and plan for weather fronts that can change on a dime.
The odds of your boat being struck by lightning are about one in 1,000. However, your odds are skewed, depending on your location. If you are in Montana, you have good chances that it won't happen, but in a popular boating state like Florida, surrounded by water, you will have less luck. One-third of the country's lightning insurance claims are filed in Florida.
According to William J. Becker, University of Florida IFAS Extension, in a report for the National Association of State Departments of Agriculture, NASDA, Florida averages more than ten deaths and thirty injuries from lightning per year. Approximately fifty percent of the deaths and injuries occur to individuals involved in recreational activities. Nearly forty percent of those are water-related: boating, swimming, surfing, and others.
Sailboats are more likely to be struck than powerboats because lightning is attracted to the mast. In the powerboat category, trawlers are struck more than other powerboats.
What is Happening When Lightning Strikes?
Becker describes it as, "The upper portion of the cloud develops a positive electrical charge, the lower level a negative electrical charge. Because it is a poor conductor of electricity, the air restricts the regular flow of electricity between these, attracting electrical charges.
While this phenomenon is occurring in the clouds, a similar event is occurring on the surface.
Negative charges repel negative charges and attract positive charges. So, as a thunder cloud passes overhead, a concentration of positive charges accumulates in and on all objects below the cloud. Since these positive charges are attempting to reach the negative charge of the cloud, they tend to accumulate at the top of the highest object around. On a boat that maybe the radio antenna, the mast, a fishing rod, or a person!"
Lightening makes its own Schedule.
While you can take steps to lessen the damage lightning will cause, you can't prevent a strike.
What happens when your boat is Struck?
NOAA, the National Oceanic and Atmospheric Administration, www.noaa.gov., estimates a strike contains around 30,000,000 volts. Your boat's electronics are most susceptible to damage. Most 12-volt electronics will be damaged, if not all, electronics on your vessel.
At times, the strike will hopscotch around the boat, and collateral damage occurs when a nearby vessel gets hit, either the result of the lightning's powerful electromagnetic field or the current induced by the field running through the boat's shore-power cord. Some electronics will be damaged; others will not. Check your compass. There may be no external damage, but the compass heading significantly affected.
Precautions to Reduce Personal Injury and Damage from Lightening.
When a thunderstorm of any kind is approaching, whether lightning is present or not;
Get everyone out of the water – scuba divers, swimmers, jet skiers, and stop any fishing activities.
Stay in the center of the cabin of the boat.
Keep arms and legs in the boat.
There is no such thing as a boat being lightning proof, but you can take steps to make your vessel lightning protected. Most pleasure craft are made of fiberglass or wood, not providing the automatic grounding protection offered by metal-hulled craft. When lightning strikes a small boat, the electrical current is searching for any route to ground, including the human body, an excellent conductor of electricity.
Major lightning protective equipment includes an air terminal, main conductor, and a ground plate. Secondary components are secondary conductors, lightning arrestors, lightning protective gaps, and connectors. Lightning arrestors and lightning protective gaps are used to protect radios and other electronic equipment, which are subject to electrical surges.
If a sailboat mast is made of conductive material, a conductor securely fastened to the mast and extending six inches above the mast and terminating in a receiving point, or a radio antenna can serve as the air terminal.
Captain Chuck Reed, and his wife, Linda, sailed their 36' Catalina sailboat from Detroit to the Caribbean and lived aboard for three years. Reed, the owner of CLR Marine, used a shaft saver on Silent Dream to to keep the boat totally ungrounded, and also save the prop shaft if a line got wrapped around it. Yes, it did save the prop shaft one time and being totally ungrounded he feels that it did save them from the lightning. The Reeds encountered many thunderstorms that included lightning, their boat did not suffer any damage due to lightning.
The National Fire Protection Association, Lightning Protection Code
For a more detailed summary of how to protect your boat from a lightning strike, refer to the National Fire Protection Association's Lightning Protection Code. www.nfpa.org.
Shaft Savers are available at https://www.clrmarine.com/462m4/marine-hardware/shaft-couplers.html
Watch the weather. Stay safe.
Fair Winds and Smooth Sailing
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
----------------------------------------------------------------------------------
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Since 1966, Schaefer Marine has stood at the forefront of Marine hardware design and engineering. Schaefer's entire line of products, from blocks to furlers, are built of the finest materials available and designed with a real-world understanding of the forces at work on a sailing yacht. All Schaefer products are designed and intended for use on sailboats for specific stated applications. There is no name in marine hardware more trusted than Schaefer. Check out Schaefer for Legendary Strength & Legendary Performance!
Schaefer manufacturers a wide variety of deck hardware from cam cleats, investment cast padeyes, welded pad eyes, stanchions, eye straps, cleats, chocks and more. Schaefer uses only the finest aluminum and Stainless Steel available and every piece is engineered to work well and is reliable for years of trouble free service.
Specials Closeouts Remanufactured Rebates
|
|
|
From everyone here at CLR Marine we would like to wish all the Dads out there a Happy Fathers Day!
Have a great time making memories with friends and family.
Because of Fathers Day we are having a sale on our Extend a Steps.
Please use coupon code father2019 at checkout.
Any Extend Your Step
All Outdoor Products
All Marine Hardware
We started a contest today to Giveaway two pairs of Mate Series Combination Fishing Rod and Cup Holders.
Follow this link to see the contest page.
Specials Closeouts Remanufactured Rebates
|
|
|
Detroit Diesel 5196513 Gasket
|
5.24 |
|
|
Tuthill 1LEV-C-A-88513-7 Pump And Motor
|
1541.22 |
|
|
Replacement Arm for Standard Motor Adjustable 10.5"-14"- 12V
Replacement Arm for Standard Motor - 10.5 - 14"
Features:
Black Powder Coated Aluminum cover
304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware
90° or 110° Adjustable Sweep
Will Power up to a 14" Arm & Blade
Guaranteed 3 Years
|
23.46 |
|
|
Groco Mp-Hardware Hardware For 155 Series
This is required hardware for new installations of the Groco 155-6110-12 and 155-6113-12 macerator pumps.
|
334.62 |
|
|
Wichard Marine - Reliability & Safety Since 1919
For more than 100 years Wichard's main mission has been to provide customers with quality products that ensure both safety and optimum performance for their sports and professional activities. Choosing a Wichard product means above all choosing a quality product that will ensure safety and performance during your voyages.
Snap Hooks, Shackles, and More! Discover our entire range of stainless steel marine hardware products made in France, offering security, performance, and reliability. Their mechanical strength and resistance to corrosion have forged Wichard's reputation over several decades. Choose the original!
Shackles - The quality of Wichard Marine products, and in particular the shackles, have proven their worth in many applications and especially in extreme sports.
Why Choose a Wichard Shackle?
- Remarkably Strong
- Optimal Size & Weight
- Proven Resistance to Corrosion
- Quality Manufacturing
- A Wide Range of Products
Specials Closeouts Remanufactured Rebates
|
|
|
SCHAEFER MARINE
Schaefer Marine products are designed and intended for use on sailboats for specific stated applications. There is no name in marine hardware more trusted than Schaefer.
|
|
|
Genoa Car - Fits 25mm (1") T Track
Features a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knob
A popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.
Features:
'Spectro' grey anodized finish
Anodized and supplied in metric lengths
The stainless steel plunger stops with positive action
Molded nylon slide inserts ensure free running
Large, easy-grip plunger knobs
Heavy-duty Genoa car options
Variety of applications on larger dinghies, dayboats, and light cruisers/racers
Cars and sliders are compatible with all makes of 'T' track
Modified slider inserts available for obscure sizes
25mm 'T' Section Track
Drilled for fastenings and plunger stops
Specifications and Dimensions:
Length: 80mm (3.15")
Width: 42mm (1.65")
Height: 87mm (3.43")
Sheave Ø: 40mm (1.57")
Max Rope Ø; 2 x 12mm (2 x 0.47")
Break Load: 2,280kg (5,026.54lbs)
SWL: 1,140kg (2,513.3lbs)
Weight: 247g (0.54lbs)
|
93.61 |
|
|
Phase III Antennas High End Deck Hardware Meets Performance
Designed to endure the harsh environment and communication requirements of commercial, law enforcement and disaster management applications, the Phase III antennas meet the needs of even the most serious offshore anglers.
Phase III antennas are backed by an industry-leading 8 year warranty to give you the peace of mind that no other antenna will last longer. Whether you install it on a vessel, base station, or a stationary platform, these antennas provide a host of mounting options to fit your need. And with their SO-239 quick connecting feature, simply install and stow away your antenna without the hassle of twisting or re-installing cables.
Always stay connected with maximum performance and quality.
Specials Closeouts Remanufactured Rebates
|
|
|
Bennett Trim Tabs on Sale in April at CLR Marine
Bennett Trim Tab Kit with Euro-Style Rocker Switch
Now until April 30, 2012, Bennett Trim Tab Kits are on sale with an additional 10% off on all sets with Euro controls.
Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation.
Bennett Trim Tab Kit with Electronic Indicator Control (EIC)
Bennett Trim Tab EIC Sets have been discounted for 2012 - that's a 25% savings on the cost of an EIC5000 when purchased in the set.
These kits contain two stainless steel trim tabs, two preasembled actuators with sensors, a hydraulic power unit, Electronic Indicator Control (EIC) all necessary wiring, tubing, hardware and installation instructions.
3-in-1: : The Electronic Indicator Control saves space on the helm by combining three features into one sophisticated control - the popular Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor. Water resistant, highly accurate and features variable intensity LEDs for night or day. The Auto Tab Retractor automatically retracts the tabs when the boat's ignition is turned off. This especially protects trailered or dry storage boats from getting trim tab damage during storing, hauling and trailering.
Bennett Trim Tab AC3000 Keypad
ATC-Ready: The EIC is also designed to connect easily with another innovative product, the Auto Tab Control (ATC). The ATC plugs right into the EIC Relay Module, interacting directly with the trim tab system to automatically monitor and maintain the perfect cruising attitude. The result is an optimum ride and significant fuel savings.
The Bennett Advantage: A trim tab system that is quiet, responsive, low-maintenance, and a great long-term value, with a 5-year warranty that Bennett stands behind without hassles or headaches.
|
|