|
Offset Triple Rod Holder
Offset Kite Cluster Rod Holder
|
196.51 |
|
|
Offset Triple Rod Holder w/Cup Holders - Port Side - Polished Aluminum
Features:
This quality rod holder can be used for rod storage and is most useful in kite fishing
Cups allow for holding rigging tools as well as a drink
Constructed of anodized aluminum and white liner to protect rods
|
309.77 |
|
|
Offset Triple Rod Holder with Cup Holders - Starboard Side - Polished Aluminum
Features:
This quality rod holder can be used for rod storage and is most useful in kite fishing
Cups allow for holding rigging tools as well as a drink
Constructed of anodized aluminum and white liner to protect rods
|
309.77 |
|
|
Triple Rod Holder w/Cup Holders - Port Side & Starboard Side - Polished Aluminum
Features:
This quality rod holder can be used for rod storage and is most useful in kite fishing
Cups allow for holding rigging tools as well as a drink
Constructed of anodized aluminum and white liner to protect rods
|
601.01 |
|
|
Triple Rod Holder - 30° Bent Butt
Much like our double rod holder, the fisherman now has three options from one holder. It has a solid weld construction, bent butt and is made from high quality aluminum. Like the old saying goes, "the third line's the charm"!
|
151.15 |
|
|
Triple Rod Holders
Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools
No. 362 Triple rod holder permanent mount board only
|
26.26 |
|
|
Triple Rod Holders
Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.
Includes 3 No. 230 Power Lock rod holders
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
95.94 |
|
|
Triple Rod Holders
Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.
Triple Rod Holder Mount Includes Mounting bracket
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
40.51 |
|
|
Deluxe Trident Rod Holder Cluster Offset
TACO's strong and durable high-polished aluminum 3-rod holder cluster with an offset is designed to maximize rod placement and usage on your boat. Great for kite fishing or as 3-rod holders in one. Fits all standard gunnel mounts, and rod holders.
Features:
Durable, welded high polished aluminum construction
Three 9-3/4" offset flared rod holders in a trident design
Ideal for kite fishing
Tube diameter 1-1/2" fits into standard rod holders 1-5/8" diameter
Designed to maximize rod placement and usage on boat
Packaged in a mesh bag for easy drying if stored wet
Round gimbal pin construction to fit today's custom rods
Eye strap attachment for safety lanyard and/or de-hooker placement
Large 9-3/4" length rod holders to accommodate bigger and heavier rods and reels
|
349.10 |
|
|
Offset Triple Aluminum Rod Holder - Straight Butt
Features:
Triple offset can be used port or starboard
Additional rod storage or for kite fishing
Constructed of anodized aluminum
Tube ID 1-7/8" Base OD 1.49"
|
285.31 |
|
|
Double Rod Holder
Part #: 105
The double rod holder, with its bent butt and angled rod holders, plus solid weld contruction from 60 series aluminum, gives the fisherman the opportunity to fish two lines from one holder.
|
82.03 |
|
|
Rod Holder - Heavy Duty - 0° - Stainless Steel
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
|
129.23 |
|
|
RAM Tube Jr. Rod Holder
Description:
Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use.
Post Spline Length:
6"
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with all RAM post spline bases
4. Compatible with spinning reels and level wind reels
5. Position spinning reel to the side or under RAM Tube Jr.
6. Compatible with left-handed and right-handed reels
7. Lifetime warranty
8. Made in the U.S.A.
Ram Adapt-A-Post™ Quick Release Track Base
The RAM Adapt-A-Post™ Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to your kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the Adapt-A-Post™ counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water.
Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-TracksScotty Slide Track, Many More!
|
23.28 |
|
|
RAM Tube Jr. Rod Holder
Description:
Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use.
Post Spline Length:
4"
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with all RAM post spline bases
4. Compatible with spinning reels and level wind reels
5. Position spinning reel to the side or under RAM Tube Jr.
6. Compatible with left-handed and right-handed reels
7. Lifetime warranty
8. Made in the U.S.A.
Ram Adapt-A-Post™ Quick Release Track Base
The RAM Adapt-A-Post™ Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to your kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the Adapt-A-Post™ counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water.
Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-TracksScotty Slide Track, Many More!
|
21.73 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
168.52 |
|