|
Triple Rod Holders
Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools
No. 362 Triple rod holder permanent mount board only
|
26.26 |
|
|
Triple Rod Holders
Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.
Includes 3 No. 230 Power Lock rod holders
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
95.94 |
|
|
Triple Rod Holders
Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.
Triple Rod Holder Mount Includes Mounting bracket
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
40.51 |
|
|
RAM Tube Jr. Fishing Rod Holder, Standard 6" Length Post Spline & Combination Bulkhead/Flat Surface Base with Plunger
Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use.
Base Description:
The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder.
Post Spline Length:
6"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
21.73 |
|
|
RAM Tube Jr. Fishing Rod Holder, Standard 4" Length Post Spline & Combination Bulkhead/Flat Surface Base with Plunger
Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use.
Base Description:
The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder.
Post Spline Length:
4"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.42 |
|
|
Triple Rod Holder - 30° Bent Butt
Much like our double rod holder, the fisherman now has three options from one holder. It has a solid weld construction, bent butt and is made from high quality aluminum. Like the old saying goes, "the third line's the charm"!
|
151.15 |
|
|
Offset Triple Rod Holder
Offset Kite Cluster Rod Holder
|
196.51 |
|
|
Offset Triple Rod Holder w/Cup Holders - Port Side - Polished Aluminum
Features:
This quality rod holder can be used for rod storage and is most useful in kite fishing
Cups allow for holding rigging tools as well as a drink
Constructed of anodized aluminum and white liner to protect rods
|
309.77 |
|
|
Offset Triple Rod Holder with Cup Holders - Starboard Side - Polished Aluminum
Features:
This quality rod holder can be used for rod storage and is most useful in kite fishing
Cups allow for holding rigging tools as well as a drink
Constructed of anodized aluminum and white liner to protect rods
|
309.77 |
|
|
Triple Rod Holder w/Cup Holders - Port Side & Starboard Side - Polished Aluminum
Features:
This quality rod holder can be used for rod storage and is most useful in kite fishing
Cups allow for holding rigging tools as well as a drink
Constructed of anodized aluminum and white liner to protect rods
|
601.01 |
|
|
60° Rod Holder Grill Mount
Kuuma's 60° Rod Holder Grill Mount enables you to turn your fishing rod holder into a grill mount. The mount has a 60° angle and an adjustable height of up to 5".
It fits most 60° rod holders with cross pins. The mounting plate is constructed of durable Stainless Steel and the extension rod is constructed of resilient Aluminum for strength.
Compatible With:
All Kuuma grills
Features:
Allows you to turn your fishing rod holder into a grill mount
Adjustable Height
Fits most 60° rod holders with cross pins
Measurements: 13-inches (height) x 5-inches (width) x 5-inches (depth)
Dimensions (H x W x D) - 13" x 5" x 5"
Includes all necessary hardware for easy mounting
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.09 |
|
|
Rod Holder Gimbal Mount Fillet Table - 30"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Large, 30" by 12-5/8" deep with towel bar.
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders, large has hose holder and towel bar
Knives and pliers not included
|
155.89 |
|
|
RAM ROD® JR Fishing Rod Holder with 2" Spline Post
The RAM ROD® Jr Fishing Rod Holder, compatible with both spinning and casting reels, is specifically designed for light-duty environments and smaller fishing rods. It features a flexible latching strap to secure the rod. A hexagonal attachment point makes the rod holder compatible with the C-Size and B-Size hex ball bases.
This configuration includes a short spline post. The RAM ROD® Jr is also GoPro® compatible – just attach a GoPro factory mount directly to the rod holder or use the Double Ball Mount to attach any action camera. If users want to mount a phone to utilize the mobile fishfinder app, use the Double Ball Mount with X-Grip®.
Specifications:
Product Dimensions: 2 in. post length
Materials: High-strength composite
Packaging Type: Retail header card
Weight: 0.71 lbs.
|
14.82 |
|
|
Rod Holder Gimbal Mount Fillet Table - 20"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Medium, 20" wide by 12-5/8" deep,
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders
Knives and pliers not included
|
135.61 |
|
|
Dual Rod Holder/Front Mount
Front-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
56.06 |
|