|
FENDER - Red - Pair
Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Features:
Rubber-like material doesn’t slide along the railing
Does not clunk around or leave marks on your boat
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
Can also be attached while the line is tied on both ends
No need for loose clips
Applications:
Snubber FENDER is suitable for all types of boats that have handrails
Fender lines with a diameter of 5-8 mm and also fits flat ties
Fits chains, ropes, and bars
Specifications:
Size: 138 x 40 x 24 mm
Weight: (lb) 0.17 / (g) 77
Weight (pair): (lb) 0.34 / (g) 154
Color: Red
*Sold as a pair
|
25.72 |
|
|
FENDER - Black - Pair
Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Features:
Rubber-like material doesn’t slide along the railing
Does not clunk around or leave marks on your boat
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
Can also be attached while the line is tied on both ends
No need for loose clips
Applications:
Snubber FENDER is suitable for all types of boats that have handrails
Fender lines with a diameter of 5-8 mm and also fits flat ties
Fits chains, ropes, and bars
Specifications:
Size: 138 x 40 x 24 mm
Weight: (lb) 0.17 / (g) 77
Weight (pair): (lb) 0.34 / (g) 154
Color: Black
*Sold as a pair
|
25.72 |
|
|
FENDER - Grey - Pair
Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Features:
Rubber-like material doesn’t slide along the railing
Does not clunk around or leave marks on your boat
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
Can also be attached while the line is tied on both ends
No need for loose clips
Applications:
Snubber FENDER is suitable for all types of boats that have handrails
Fender lines with a diameter of 5-8 mm and also fits flat ties
Fits chains, ropes, and bars
Specifications:
Size: 138 x 40 x 24 mm
Weight: (lb) 0.17 / (g) 77
Weight (pair): (lb) 0.34 / (g) 154
Color: Grey
*Sold as a pair
|
25.72 |
|
|
FENDER - White - Pair
Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Features:
Rubber-like material doesn’t slide along the railing
Does not clunk around or leave marks on your boat
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
Can also be attached while the line is tied on both ends
No need for loose clips
Applications:
Snubber FENDER is suitable for all types of boats that have handrails
Fender lines with a diameter of 5-8 mm and also fits flat ties
Fits chains, ropes, and bars
Specifications:
Size: 138 x 40 x 24 mm
Weight: (lb) 0.17 / (g) 77
Weight (pair): (lb) 0.34 / (g) 154
Color: White
*Sold as a pair
|
25.72 |
|
|
TWIST - Red - Pair
Snubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.
Features:
It fits different line types and diameters, including ties
Can be attached while the line is tied on both ends
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
No need for loose clips
No rubber or metal material
Does not clunk around or leave marks on your boat
Applications:
It can be used for the anchor line
Motor and sailing boats
Optimal elasticity and fast recovery to original size and length to absorb shocks in docking
Specifications:
Designed for 1102 – 13200 lb or 500 – 6000 kg boats
Measurements: 542 x 55 x 54 mm
Weight: (lb) 0.83 / (g) 375
Color: Red
*Sold as a pair
|
145.72 |
|
|
FENDER - Navy Blue - Pair
Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Features:
Rubber-like material doesn’t slide along the railing
Does not clunk around or leave marks on your boat
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
Can also be attached while the line is tied on both ends
No need for loose clips
Applications:
Snubber FENDER is suitable for all types of boats that have handrails
Fender lines with a diameter of 5-8 mm and also fits flat ties
Fits chains, ropes, and bars
Specifications:
Size: 138 x 40 x 24 mm
Weight: (lb) 0.17 / (g) 77
Weight (pair): (lb) 0.34 / (g) 154
Color: Navy Blue
*Sold as a pair
|
25.72 |
|
|
Zig-Zag Fender Hanger - Pair with 4' Fender Lines
No need for knots in your fender lines. Keeps fenders in place with a simple system. Put a line over the rail and weave it through the zig-zag teeth.
Features:
Pair, 4 ft. fender lines included
Quick and easy to use
|
9.60 |
|
|
Shock - 3/16" Line - 1/4" Webbing - Red - Pair
The Sheaveless Black
The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.
Ultimate durability
With no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is strong enough to cope with poor leads.
Soft attachment specialists
SHOCKS are designed primarily for 'soft attachment'; spliced to a line end or lashed in place. The elongated attachment aperture is also ideal for webbing attachment, ensuring the intended orientation is maintained.
Virtually limitless applications
The applications for SHOCKS are virtually limitless, including numerous high performance dinghy and small sailboat rigging applications including tweakers, vangs, trapezes, cunninghams, barber haulers and kite bridles. They are also handy on larger boats for uses such as lazy jacks, sail covers, tie-downs, ladder and motor hoists.
Hidden performance
At a mere 2.5g (0.1 oz), SHOCKS are outstanding performers in the strength and weight stakes. The clever design and exacting finishing also provide excellent free running at moderate changes of angle. Small & hi-tech line specialists SHOCKS accept lines from 1.4mm (1/16") up to 8mm (5/16") and function just as well with hi-tech uncovered braids as with traditional double braids.
Features:
Performance & versatility
Ultra lightweight
Ultra compact
Durable
Color coded
Impact resistant
Small line optimised
High load capacity
Poor alignment tolerant
Soft attachment compatible
Grit & salt resistant
Applications:
Unlimited uses, including kitesurfing, paragliders, sports kites, power kites, stunt kites, depower kites, traction kites, for deflection or purchase system on control lines
Materials:
Anodized Aluminum
Specifications:
Rope Ø:1.4mm-5mm(1/16" - 3/16")
Height:8.5mm(5/16")
Width: 14.9mm(9/16")
Length:22.9mm(7/8")
M.W.L.:175kg(385lbs)
B. L.:350kg(770lbs)
Weight:2.5g(0.01oz)
|
15.40 |
|
|
Replacement T-Top Tube Light - White/Red LEDs
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
Tube Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Light tube & connection sealed for water resistance
Mounting clips included for easy installations
Ideal for use on engine rooms, T-tops and arches
Universal design for use as replacement light for existing standard T-top light housings
|
85.91 |
|
|
T-Cleat Cam Cleat - Small - Red w/Grey Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. T-cleats have tough glass fiber reinforced cams providing outstanding value for most cleating applications.
Features:
Outstanding value for most cleating applications
High strength
Superior holding power
Lightweight
Corrosion resistant
Self lubricating, self-cleaning bearings
Low line entry effort, easy to release
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.72 |
|
|
Base Reducer - Pair
If you currently have a set of TACO Marine outrigger poles from your GS-170 mounts, they can still be used if you upgrade your bases to our GS-280 or 380 series. Our TACO Outrigger Base Reducer is the perfect complement to allow your current poles to be used, by reducing the base without missing a beat.
Features:
Reduces Grand Slam base from 1-1/2" to 1-1/8"
Allows the use of GS-170 Outrigger Poles with GS-200 and 300 Series
Nylon, easy-to-install sleeve design
1-year Limited Warranty
|
115.75 |
|
|
The Snubber - New Line Now At CLR Marine.
The Snubber product line includes a Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy to use for all boaters. All Snubber products are made in Finland for domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.
The Snubber - Product Line
Snubber FENDER - Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Snubber TWIST - Snubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock.
Snubber PULL - Two products with one click. Snubber PULL is a comfortable pulling rope for a rowboat or any small vessel. Securely attach the rope in a few seconds.
Specials Closeouts Remanufactured Rebates
|
|
|
The Snubber
The Snubber product line includes Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy-to-use for all boaters. All The Snubber products are made in Finland to domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.
|
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
TWIST - Grey - Pair
Snubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock. Snubber products are made from carefully selected, high-quality materials to last severe weather conditions. The products will not lose color or leave marks on your boat. All Snubber products are designed and made in Finland.
Features:
It fits different line types and diameters, including ties
Can be attached while the line is tied on both ends
Quick simple attachment and detachment
No need to attach the line permanently through the compensator
No need for loose clips
No rubber or metal material
Does not clunk around or leave marks on your boat
Applications:
It can be used for the anchor line
Motor and sailing boats
Optimal elasticity and fast recovery to original size and length to absorb shocks in docking
Specifications:
Designed for 1102 – 13200 lb or 500 – 6000 kg boats
Measurements: 542 x 55 x 54 mm
Weight: (lb) 0.83 / (g) 375
Color: Grey
*Sold as a pair
|
145.72 |
|