T-Cleat Cam Cleat - Small - Red w/Grey Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. T-cleats have tough glass fiber reinforced cams providing outstanding value for most cleating applications. Features: Outstanding value for most cleating applications High strength Superior holding power Lightweight Corrosion resistant Self lubricating, self-cleaning bearings Low line entry effort, easy to release Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Small - Grey w/Grey Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Medium - Grey w/Grey Base 3-12mm(1/8" - 1/2") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Large - Grey w/Grey Base 6-16mm(1/4" - 5/8") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Small - Black w/Black Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Small - Blue w/Black Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Medium - Black w/Black Base 3-12mm(1/8" - 1/2") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

V-Cleat Open - Small - 3-6mm(1/8" - 1/4") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

Front Mounted Cleat Fairlead - Small - Black Easily fitted to the small 'T-Cleat' and 'C-Cleat'. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating. Will not catch lines or clothing. Material Tough, abrasion resistant composite material.

Cam Fairlead - Red Mounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Dock Edge Cleatlite Solar Dock Light w/ SS Mooring Cleat 12" These solar lights are mounted on top of a sturdy steel base, housed inside an attractive, Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries. Product Specifications: Part No.: 96-250-F Description: CleatLite, Solar Dock Light c/w SS Mooring Cleat

Navilight All RED 360° 2NM w/Navimount Base & Rail Mount - Black Portable All-round RED Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts. The Navilight All RED 360° without the Navimount base can be mounted directly to the 4-piece-pole but also directly to all kind of GoPro® / Action camera mounts. Technical Specifications: 5 Modes: 360° Float light facing up Submersible to 20M /66' Corrosion resistant Powered by three AAA batteries (not included) Modes: 16 RED LED 360° Constant lights / 40 - 45hrs 16 RED LED 360° Flashing lights / 110 - 115hrs 10 RED LED 225° Forward lights / 70 - 75hrs 6 RED LED 135° Stern lights / 95-100hrs 4 RED LED 360° Dim function / 125-130hrs Navimount RAIL Mount - Black The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Navilight All RED 360° 2NM w/Navimount Base & RIB Mount - Black Portable All-round RED Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts. The Navilight All RED 360° without the Navimount base can be mounted directly to the 4-piece-pole but also directly to all kind of GoPro® / Action camera mounts. Technical Specifications: 5 Modes: 360° Float light facing up Submersible to 20M /66' Corrosion resistant Powered by three AAA batteries (not included) Modes: 16 RED LED 360° Constant lights / 40 - 45hrs 16 RED LED 360° Flashing lights / 110 - 115hrs 10 RED LED 225° Forward lights / 70 - 75hrs 6 RED LED 135° Stern lights / 95-100hrs 4 RED LED 360° Dim function / 125-130hrs Navimount RIB - Black The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes: "3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Navilight All RED 360° 2NM w/Navimount Base & Rail Mount - White Portable All-round RED Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts. The Navilight All RED 360° without the Navimount base can be mounted directly to the 4-piece-pole but also directly to all kind of GoPro® / Action camera mounts. Technical Specifications: 5 Modes: 360° Float light facing up Submersible to 20M /66' Corrosion resistant Powered by three AAA batteries (not included) Modes: 16 RED LED 360° Constant lights / 40 - 45hrs 16 RED LED 360° Flashing lights / 110 - 115hrs 10 RED LED 225° Forward lights / 70 - 75hrs 6 RED LED 135° Stern lights / 95-100hrs 4 RED LED 360° Dim function / 125-130hrs Navimount RAIL Mount - White The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.