Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

Yamaha Fuel Line Kit 6' x 3/8" Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance. Features: Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks Attwood products are both compatible and reliable, engineered and built with a never-fail attitude WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel/Water Separator Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability. Features: Double seal for enhanced performance Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872

PleasureCraft Marine RP061022 Impeller for Raw Water Pump Impeller for 2003 and newer PCM engines using Serpentine belt and PCM water pump Not for v-belt systems!   Fits Crusader and Pleasurecraft Marine PCM 5.0 , 5.7, 6.0 & 8.1 models with serpentine belt driven water pumps. Will not for V-belt systems.   Replaces : Crusader and Pleasurecraft R061022 , RP061022 , Sierra 18-8926 , Mallory 9-45718

Universal Fuel/Water Separator Kit with Bracket Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines. Features: 10 Micron Filter and bracket included Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports Double seal for enhanced performance Replaces Mercury 35-60494A4

Spun Silver Box Set of 6 Gauges f/ Inboard Engines - Speed, Tach, Voltmeter, Fuel Level, Water Temperature & Oil Packaged and ready for the display counter. This 6 gauge boxed set offers a complete set of gauges ready to install.  Boxed Set Includes: Tachometer (0 to 6000 RPM) Speedometer (0 to 55 MPH) Fuel Level (E to F) Voltmeter (10 to 16 AMPS) Water Temperature (100 to 250° F) Oil Pressure (0 to 30 PSI) Factory P/N KTF0184 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Euro Black 4" Multifunction Gauge - Volt/Fuel/Oil/Water Temperature Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.  Multi-Function Gauge Displays: Fuel (E to F) Volts (10 to 18 AMPS) Oil Pressure (0 to 80 PSI) Water Temp. (120 to 220° F) 4" Gauge - Hole size: 3.4" (86.36 mm) Features: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N GF0001 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Cockpit Marine 52MM (2-1/16") Water Temp. Gauge - 0-250°F - White Dial/Chrome Bezel VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.  As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio. Features: 100 - 250°F Range Works with all 450-29 OHM common marine temperature senders For 12V electrical systems Mounting Hardware Included *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HOT FOOT™ Universal Original Foot Throttle for All Marine Engines Now compatible with all Mercury 175-300 Pro XS outboard motors The Original and ONLY real HOT FOOT™ Throttle Drive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years. This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats. Features: Drive your boat like you drive your car -- features make driving your boat fun and safe Number one throttle on the market for over 20 years Provides added safety and performance Improves throttle control for all outboard and inboards All cast aluminum and stainless steel hardware Lightweight and resistant to corrosion Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation Nylon and teflon bushings on all critical pivot points Stainless steel spring returns engine to idle position when released Equipped with toe clip for additional safety in extreme operating conditions Uses standard control cables for easy hook-up (longer throttle cable not included) Mounts directly to floor of boat with four screws (not included) Patented Idle Stop for FICHT and Optimax Engines Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MS-BB100 Marine Black Box AM/FM/BT - 2 Zone Introducing the MS-BB100, a compact black box entertainment solution that incorporates the marine industry supported Fusion-Link protocol and Fusion's proven marine engineering skillset to deliver a boat load of tunes.  An industry first, the BB100 includes an easy touch Bluetooth embedded IPx7 water resistant remote for quick audio adjustments.  Supplied with a 2m (6.6ft) connection cable, the wired remote is ideally shaped for hassle free installation onto a dash or boat console.  With the Bluetooth receiver embedded into the remote we can reduce the likelihood of interference occurring between your smartphone and the receiver.  Engineered for either a flush or flat mount installation, you can choose the finish to suit your vessel. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-BB100 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-BB100 with a supported chartplotter or fish finder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the BB100 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones Fusion-Link™ makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat. Multi-Zone Control With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Features: Small footprint Black Box design with included Bluetooth embedded wired remote IPx7 water resistant wired remote with quick Bluetooth pairing Flush or flat mounting remote control installation options Fusion-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display Multi-Zone™ Technology – Two independent audio zones are available, each with advanced localized menu controls, including zone naming True-Marine™ Designed and Engineered – Extensively tested to perform in the harsh marine environment Technical Specifications: 2 Zones 200 Watts peak power NMEA 2000 compatible  Class AB Amplifier Rear USB connection Dimensions (W/H/D) - 6-1/8" x 2-3/8" x 3-11/16"  Remote Dimensions (Diameter/Depth) - 2-9/16 x 3/16"  In the Box: Media Black Box Remote - Wired Remote Mounting Hardware/Gasket Remote Mounting Template 6' NMEA 2000 Drop Cable Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc Wedge Anode for 35-300 HP Mercury/Mariner Engines Tecnoseal Zinc Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt water. Mercury part number 826134.

Aluminum Wedge Anode for 35-300 HP Mercury/Mariner Engines Tecnoseal Aluminium Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt or brackish water. Mercury part number 826134.

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills (1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32"

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills (1324) Black Plastic with Gasket Built in Lock Cylinder Size #1 Fits PERKO Fills 0520, 0527, 0528, 0557, 0599 and 1270 Cap Outside Thread Diameter: 1-7/8"