STA-RITE A100DLL 3/4HP JET MOTOR

STA-RITE A100ELL 1HP JET MOTOR

Sta-Rite PND-10 Shallow Well Jet Pump 3/4HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Sta-Rite PWP-01 Shallow Well Jet Pump 3/4HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, No Pressure Switch, up to 25 Foot Water Depth

Sta-Rite HMSE-1FL Multi-Stage Jet-Centrifugal Pump 1HP Sta-Rite- Multi-Stage Jet-Centrifugal Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction Port, 1" Drive and Discharge Ports, 30/50PSI Pressure Switch, For Shallow or Deep Wells

Sta-Rite PNC-10 Shallow Well Jet Pump 1/2HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Scot Pump 48372X-3/4HP MPU 72 1PH 3/4HP 4 IMP ODP Pump  Seawater Bronze case, impeller, adapter  Seawater Bronze 7/8 inch shaft  Mechanical seal is 7/8 inch diameter  Impeller is keyed to stub shaft and secured by a washer and locking assembly.  O-Ring case gasket   Motor – 2 Pole  Standard NEMA frame motor

Scot Pump 48451X-3/4HP MPU 3/4HP 1PH 56C Pump • Seawater Bronze case, impeller adapter • Seawater Bronze 7/8” shaft • Impeller keyed to stub shaft and secured by washer and locking assembly • O-ring case gasket    Motor • Standard NEMA frame motor • 1 and 3 phase

March TE-6T-MD-3PH 3/4HP WEG Poly Glass Pmp W/3Ph 3/4Hp

Sta-Rite 7P4DO2JL Submersible Well Pump 4” 3/4HP Sta-Rite- Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 3 Wire, 3/4HP 230V, 1-1/4”NPT Port

Sta-Rite JHD-62HL Centrifugal Pump High Head 3/4HP Sta-Rite- Centrifugal Pump, High Head, Cast Iron Construction, 3/4HP 115/230V Motor, 1-1/4" Suction and 1" Discharge Ports, up to 47GPM, up to 100 Feet of Head, Maximum Lift is 25 Feet

Sta-Rite S7P4JP07231 Submersible Well Pump 4” 3/4HP Sta-Rite- Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 3 Wire, 3/4HP 230V, 1-1/4”NPT Port, Built-in Check Valve

Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP 1/2 HP - 115/230 Volt - Shallow Well Jet Pump The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water. APPLICATIONS Water systems and sprinkling   FEATURES Quality Construction Close grained cast iron body. Drain port provided for easy winterizing. Built-in Jet High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl Impeller Precision-molded for perfect balance ultra-smooth for highest performance and efficiency. Precision Molded Diffuser Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser. Mechanical Shaft Seal Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication. Motor Windings Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life. Balanced Rotor Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced. Heavy-duty Ball Bearings Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment. Dustproof Cover All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components. Pressure Switch Professional quality, allows cut-in adjustments. SPECIFICATIONS Max. Liquid Temperature: 140°F Max. Inlet Pressure: 50 PSI

Sta-Rite HLE-L Convertible Jet Pump 1HP Sta-Rite- Convertible Jet Pump, Cast Iron Construction, 1HP 115V Only Motor, 1-1/4" Suction Port, 1" Drive and Discharge Ports, 30/50PSI Pressure Switch, up to 26.8GPM with shallow well, Maximum 25 Feet of Lift Shallow Well, 120 Feet Deep Well, Requires Jet Package for Operation

Sta-Rite MSE-7 Vertical Multi-Stage Jet Pump 1HP Sta-Rite- Vertical Multi-Stage Jet Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction and Drive Ports, 1" Discharge Port, 40/60psi Pressure Switch, For Shallow or Deep Wells